电机驱动的

词组短语

motor-driven

与电机驱动的相关的网络例句 [注：此内容来源于网络，仅供参考]

I found a 51 stepper motor control project has a simple source code, can give those who want to design stepper motor-driven to help people.

详细说明：我找到的一篇51控制步进电机的工程有简单的源代码，可以给那些想设计步进电机驱动的人一些帮助。

According to ultrasonic motor drive control unit, designed a DDS signal generator for ultrasonic motor-driven.

根据超声波电动机对其驱动控制单元的要求，设计了一种用于超声波电机驱动的DDS信号发生器。

In view of the present major problems of the open-loop control system for economic CNC lathe with stepping motor as feed motor, a newtype of closed-loop control system for stepping motor has been presented in the paper.

针对目前以步进电机驱动的经济型 CNC车床开环控制系统存在的主要问题，提出了一种新型的步进电机闭环控制系统。

Summarized are the suspending principle, technology characteristic and applicable range of repellence and attraction maglevvehicle. Analyzed as a emphases are the drive technology characteristic and performance compare of long－stator and short－stator linear synchronization motor driving for maglevvehicle

综述了斥力型和吸力型磁浮列车的悬浮原理、技术特征及适用范围，重点分析了两种不同的磁浮列车驱动方式——长定子线性同步电机驱动及短定子线性同步电机驱动的技术特征和性能比较。

Electric machinery ; BLDCM driven systems ; Rate smoothness ; Force ripple ; Robust repetitive control

电机；无刷直流电机驱动的系统；速率平稳性；力矩波动；鲁棒重复控制

A double-side deployment mechanism for the bean-shaped strut bar of a thin-film antenna driven by a single motor is provided, which relates to a double-side deployment mechanism for the strut bar of a thin-film antenna driven by a single motor.

一种单电机驱动的薄膜天线豆荚形支撑杆双侧展开机构，它涉及一种单电机驱动的薄膜天线支撑杆双侧展开机构。

Machine tool feed system is usually driven by AC servo motor ball screw feed drive to achieve, to simplify the structure.

机床的进给系统通常是通过交流伺服电机驱动的驱动滚珠丝杠饲料，简化结构，实现。

We design a five-fingered dexterous hand driven by an ultrasonic motor,whose power is conveyed to various joints by elastic belts of the ultrasonic motor placed at the palm of the dexterous hand.

设计一个由超声电机驱动的仿人五指灵巧手，由于超声电机的一些优点，使得该五指灵巧手与人手相仿，共有20个独立自由度，重量不足1000 g。

In this paper RoboCup Mid-size Robot are the object of study from the two sides of the robot system and the system of multi-robot cooperation, the main research results are as follows: First, this paper reasearches the problom of the hardware and software architecture of Mid-size robots. According to the real-time requirements of the competition, the paper designs the mechanism of omni-direction wheels, which achieves a great improvement on the traditional mechanism of two wheels robot, and a more flexible response. This mechanism can adapt well to the increasingly rapid pace of the competition. In allusion to the mechanism of omni-direction wheels, this paper designs the electrical control system of three nodes in the bottom, which could communicate fast to the laptop with serial port and match the real-time requirements well. According to the problom of hitting power and speed of robot when shooting, this paper designes a motor-driven tongue-shaped spring shooting mechanism, which has a simple mechanical structure, smaller space in size and simple control circuit. This shooting mechanism meets the real-time requirements of the competition better.

本文以RoboCup中型机器人作为研究对象，分别从机器人自身系统和多机器人协作系统两个方面进行了研究，主要研究成果如下：首先，研究了中型机器人的软硬件体系结构问题，针对实时比赛的要求，提出了万向轮机构的设计方案，大大改进了传统两轮机器人结构，动作反应更加灵活，该机构能够很好的适应节奏越来越快的比赛；针对万向轮机构，设计了3节点的底层电机控制系统，它可以通过串口与上层笔记本电脑快速通讯，能够很好的实现实时工作要求；针对机器人射门时击球力量和速度的问题，设计了一套电机驱动的舌形弹簧射门机构，机械结构简单，占用空间体积小，控制电路简单，较好的满足了比赛中实时射门的要求。

The starting character that studies electric machinery of ultrasonic of wave of laden be issued to lower levels in development, moving character, timing character, pace enters characteristic, area on the foundation of laden ability, announced load affects the pattern to small step pilot, the robot much freedom that put forward to be based on drive of electric machinery of travelling wave ultrasonic spends articulatory and exact location to control a method.

在深入探究负载下行波超声波电机的启动特性、运行特性、调速特性、步进特性、带负载能力的基础上，揭示了负载对微步控制的影响规律，并提出了基于行波超声波电机驱动的机器人多自由度关节精密定位控制方法。

与电机驱动的相关的网络解释 [注：此内容来源于网络，仅供参考]

Alignment：对准

电弧融接法是最常用应用最多的方法. 仪器一般包括四个部分:光纤的准直与加紧机构,光纤的对准机构,电弧放电机构,电弧放电和电机驱动的控制机构. 要求通过预习和实验,对各部分有深入的了解和认识. 准直(collimating)与对准(alignment)部件非常精密,严禁用手触摸,保持距离.

Dead Time：死区时间

FAN7380具有内置的100 ns死区时间 (dead time) 控制功能,是卓越的通用器件,可在两个通道上提供90 mA的驱动电流和180 mA吸收电流. FAN7382的驱动/吸收电流为350 mA/650 mA,特别适合PDP应用、荧光灯镇流器和电机控制应用.

handwheel：手轮

此控制器上位机是一个手轮(Handwheel)脉冲发生器和手轮脉冲信号处理器(每轴一个),一个手轮能通过切换给五个手轮脉冲信号处理器发信号. 当在手轮上选定相应的轴号时,旋转手轮驱动相应轴的电机运动,旋转方向决定电机转向,

servomechanism：伺服机构

电机订货时可以选择吹风从电机驱动端(DE)到电机非驱动端(NDE)或者相反,这些电机为连接变频...伺服机构(Servo-Mwchanisnt,)这是一种伺服系统,其中被控量为机械位置或机械位置对时间的导数. 伺服机构(servomechanism)系指经由闭回路控制方式达到一个机械系统位置、...

stepped-up infill drilling：逐步加密钻井

stepped-gain amplifier 分步增益放大器 | stepped-up infill drilling 逐步加密钻井 | stepper motor driven 步进电机驱动的

unipolar：单极性

单极性 (unipolar)和双极性 (bipolar)是步进电机最常采用的两种驱动架构. 单极性驱动电路使用四颗晶体管来驱动步进电机的两组相位,电机结构则如图1所示包含两组带有中间抽头的线圈,整个电机共有六条线与外界连接. 这类电机有时又称为四相电机,

worm gear：蜗杆

驱动机构由蜗轮(worm wheel)和蜗杆(worm gear)构成,其中,蜗杆直接与电机的轴耦合. 电机配备有高分辨率高速光学编码器以向控制电子系统提供速度、方向和相对位置反馈信息. 通过插值可以实现比编码轮或代码条(codestrip)更高的分辨率,

gearless：无齿轮

所谓无轴技术就是用交流电机驱动的(虚拟的)电子轴线取代传统、复杂的机械传动轴,也有人因此把无轴技术称为无齿轮(Gearless)传动技术. 这种系统的驱动和控制,使用精确的电子同步数字化智能侍服电机,依赖精确同步控制的智能侍服电机的驱动,

Renk：连克

2002~2003年度我公司进口两台德国连克(Renk)公司减速机,型号为BH-180,用于水泥磨. 减速机按中央压力润滑,每个轴承都是单独供油,各啮合处都由喷油方式润滑,润滑和冷却用油是由电机驱动的齿轮泵供给.

back EMF：反电动势

目前最常用到的电子驱动方式,有利用霍尔效应元件 (Hall effect sensors) 或是反电动势 (Back EMF) 来侦测电机转子绕组的机械角度 (Mechanical Angle) 或电机角度 (Electrical Angle),然后准确的控制 MOSFET 的开关,