- 更多网络例句与甲基丙烯酸相关的网络例句 [注：此内容来源于网络，仅供参考]
-
Isobornyl methacrylate ; Ion exchgange resin ; Methacrylic acid ; Camphene ; Kinetics
甲基丙烯酸莰醇酯；离子交换树脂；甲基丙烯酸；莰烯；反应动力学
-
Poly(N-isopropylacrylamide-co-2-hydroxyethyl methacrylate)/clay hydrogel was copolymerized with NIPA and HEMA cross-linked by clay to form a new kind of nanocomposite hydrogel P(NIPA-co-HEMA)/clay was obtained.
以无机粘土为交联剂制备了具有温度、pH双重敏感性的聚(N-异丙基丙烯酰胺-co-甲基丙烯酸-β-羟乙酯)/粘土纳米复合水凝胶P(NIPA-co-HEMA/clay，并用红外和X衍射对其结构和形态进行了表征。
-
Three methods are used to prepare molecular imprinted polymers,which include conventional bulk technique or polymerization with ultraviolet initiated in low temperature and polymerization with silica-gel as sacrificial materials. In the polymerization procedure , Sulfamethazine(SM2)and Sulfisoxazole were used as target template molecules, methacrylic acid and 4-vinylpyridine(4-VP) and acrylamide were selected as functional monomers, ethylene glycol dimethacrylate as crosslinker, azobisisobutyronitrile was used as initator.
主要工作如下：首先，以磺胺异噁唑和磺胺二甲嘧啶为模板，分别以4-乙烯基吡啶，甲基丙烯酸，丙烯酰胺为功能单体，以二甲基丙烯酸乙二醇酯为交联剂，偶氮二异丁腈为引发剂，采用了传统方法(60℃恒温水浴)、牺牲硅胶法及低温紫外光聚合法等三种方法合成了一系列的磺胺类药物印迹聚合物。
-
The title nano-sized polymeric microgels were synthesized by emulsion polymerization method,using divinyl benzene as crosslinking agent and methyl methacrylate,hydroxyl ethyl methacrylate,butyl acrylate as monomers.
通过乳液聚合的方法，以二乙烯基苯为交联剂，用甲基丙烯酸甲酯、甲基丙烯酸-β-羟乙酯、丙烯酸丁酯等丙烯酸酯类单体合成纳米尺寸的聚合物微凝胶粒子。
-
Our main products category has chloride (pivaloyl chloride, acetyl chloride, Propionyl chloride, methyl acryloyl chloride, butyl chloride, 2 - furyl chloride already chloride, acryloyl chloride, is amyl chloride, etc.) and acids (positive acid, pivalate, propionate, acetic acid, methyl acrylate, 2 - furoic acid, etc.) and so on dozens of products.
我公司主要生产的产品有酰氯类（特戊酰氯、乙酰氯、丙酰氯、甲基丙烯酰氯、正丁酰氯、2-呋喃甲酰氯、己酰氯、丙烯酰氯、正戊酰氯等）和酸类（正丁酸、特戊酸、丙酸、乙酸、甲基丙烯酸、2-呋喃甲酸等）等几十种产品。
-
First, according to documents report, the complexes of poly (methacrylic acid-co-methyl methacrylate) network with poly stabilized by the hydrogen bonds were designed and synthesized.
首先根据文献报道，设计并合成了聚（甲基丙烯酸-co-甲基丙烯酸甲酯）网络及其与聚乙二醇的氢键聚合物网络复合物。
-
The combination effect of hindered amine light stabilizers PDS copolymer of 2,2,6,6 tetramethyl 4 piperidinyl methacrylate(TMPM with styrene with several kinds of antioxidant in polypropylene under γ irradiation was studied in this article.
研究了受阻胺光稳定剂 PDS4-(甲基丙烯酸- 2 ，2 ，6 ，6 -四甲基哌啶醇酯和苯乙烯的共聚物与几种类型抗氧剂在γ-辐射下在聚丙烯中的并用效应。
-
Polyurethane-acrylate Macromer was synthesized by IPDI, HEMA and PEG, and a new kind of transparent polymer was preparaed by the Macromer crosslinked.
利用异佛尔酮－二异氟酸酯、甲基丙烯酸－β羟乙酯、聚乙二醇合成了一种聚氨酯丙烯酸酯类大分子单体，并将其固化交联得到一种新型透明材料。
-
Two series of polyurethane acrylate grafted acrylic resins (Acr-g-TPU-PETA and Acr-gPPU-PETA) self-emulsifying systems are obtained by grafting -NCO group modified polyurethane acrylates with acrylic copolymer prepared from n-butyl acrylate, styrene,βhydroxyethyl methacrylate and acrylic acid The self-emulsifying systems showed Newtonian fluidity with viscosity closed to that of water, the solid contents were around 30% The T〓 of 15～4℃ for dried film before photocuring favored film formation at room temperature DSC and DMA results showed that PU-PETA is compatible with acrylic resin in the grafted resin The TG and dTG curves for Acr-g-PU-PETA samples were substantially different from the corresponding blends, and the brodened dTG peaks for photocured grafted resin suggest that there might be multiple interactions among chain segments The photocued film of the grafted resins self-emulsifying system exhibited good overall properties with polyurethane acrylate grafts ranging from 30% to 50%, and Acr-g-TPU-PETA series showed better properties than Acr-gPPU-PETA series The adhesion of the photocured film was 1～2 grade, impact strength was 50kg-cm and flexibility was 1mm The Shore hardness and the adhesion of the film decreased markedly if PETA was replaced by HEMA as photoactive group due to the lower C=C double bond content in the grafted resin The polyhydroxy amine-linked thioxanthones photoinitiators can be evenly dispersed in self-emulsifying system without color spot appearing in the dried film The films photocured with IV〓～IV〓 generally exhibited higher Shore hardness, gloss and solventresistance than that cured with Irgacure 2959 and did not induce the rusting of the iron substrate Pigmenting with titanium oxide had no effect on the photocuring The polyhydroxy amine-linked thioxanthone IV〓 and IV〓 can be new candidates for the formulation of titanium oxide pigmented photocurable water-borne coatings for their pale-yellow appearance and slight interference with the color of the coatings WB 4759 with high water-solubility coalesced and separated from the dried resin film, and even induced the rusting of iron substrate.
以丙烯酸丁酯，甲基丙烯酸-β-羟乙酯，丙烯酸及苯乙烯合成厂丙烯酸共聚树脂，并与含-NCO端基的聚氨酯丙烯酸酯接枝反应，经水性化后，得到两个系列（Acr-g-TPU-PETA和Acr-g-PPU-PETA）各5个不同配比的丙烯酸树脂接枝聚氨酯丙烯酸酯自乳化体系，粘度与水相近，为牛顿流体，固含量30％左右。光固化前干燥涂膜的玻璃化转变温度在-15℃～4℃之间，有利于室温下成膜。DSC及DMA谱表明两种树脂基本相容。Acr-g-PU-PETA的热失重行为明显不同于共混材料，接枝样dTG峰明显宽化，表明接枝样中链段之间的相互作刚有多重性，丙烯酸树脂与聚氨酯之间有一定的相容性。接枝树脂自乳化体系光固化涂层的综合性能以聚氨酯丙烯酸酯成分为50％～30％者相对较好，且以Acr-g-TPU-PETA系列更理想。光固化膜的附着力为1～2级，冲击强度为50kg·cm，柔软性多为1mm。以HEMA代替PETA作为接枝树脂的活性基团，碳—碳双键密度太低，光固化膜交联点太少，硬度和附着力均较差。多羟基胺连硫杂蒽酮光引发剂能均匀分散于树脂自乳化体系和接枝树脂干膜中，不出现色斑，光固化膜肖氏硬度一般高于以Irgacure 2959为光引发剂的光固化膜，光泽度及耐丁酮溶剂性能均有所提高，不会诱导铁基生锈，钛白着色对光固化结果几乎没有影响。本论文所合成的多羟基胺连硫杂蒽酮光引发剂IV〓与IV〓为浅黄色，对光固化涂层的颜色干扰较小，为配制钛白着色光固化水性涂料提供了新的光引发剂。水溶性太强的WB 4759在干膜中易聚结析出，且对所附着的铁基有诱导锈蚀作用。
-
The swelling properties of epoxy vinyl ester resin/2-hydroxyethyl methacrylate copolymeric hydrogels were investigated.
该文研究了酚醛环氧型乙烯基酯树脂/甲基丙烯酸-β-羟乙酯共聚水凝胶的溶胀性质。
- 更多网络解释与甲基丙烯酸相关的网络解释 [注：此内容来源于网络，仅供参考]
-
methacrylic acid：甲基丙烯酸
甲基丙烯酸(methacrylic acid)的热容(heat capacity)与温度有关,在网上找到了一篇文章,这个关系式如下:
-
methacrylic acid：甲基丙烯酸,异丁烯酸
methacrylate 丙烯酸(甲)酯 | methacrylic acid 甲基丙烯酸,异丁烯酸 | methane 甲烷,沼气
-
methacrylic acid：(一四三) 甲基丙烯酸
(一四二) 丙烯酸甲酯 Methyl acrylate | (一四三) 甲基丙烯酸 Methacrylic acid | (一四四) 甲基丙烯腈 Methylacrylonitrile
-
methacrylic acid chloride：甲基丙烯醯氯
"methacrylic acid","甲基丙烯酸" | "methacrylic acid chloride","甲基丙烯醯氯" | "methacrylic acid-divinylbenzene copolymer","甲基丙烯酸-二乙烯苯共聚物"
-
amba：丙烯腈 甲基丙烯酸 丙烯腈 丁二烯橡胶
AES丙烯腈 乙烯 苯乙烯共聚物 | AMBA丙烯腈 甲基丙烯酸 丙烯腈 丁二烯橡胶 | AMMA丙烯腈 甲基丙烯酸甲酯共聚物
-
methacrylic acid-divinylbenzene copolymer：甲基丙烯酸-二乙烯苯共聚物
"methacrylic acid chloride","甲基丙烯醯氯" | "methacrylic acid-divinylbenzene copolymer","甲基丙烯酸-二乙烯苯共聚物" | "methacrylic acid polymer","甲基丙烯酸聚合物"
-
MAA：甲基丙烯酸
求购丙烯酸-求购丙烯酸,化工/羧酸衍生物/酯,该产品丙烯酸(Aa)丙烯酸甲酯(Ma)丙烯酸乙酯(Ea)丙烯酸丁酯-丙烯酸(Aa) 丙烯酸甲酯(Ma) 丙烯酸乙酯(Ea) 丙烯酸丁酯(Ba) 苯乙烯 (Sm) 甲基丙烯酸甲酯(Mma) 甲基丙烯酸(Maa) 丙烯酸异辛酯(2
-
methyl acrylic acid：甲基丙烯酸
methyl acrylic acid 甲基丙燃酸 | methyl acrylic acid 甲基丙烯酸 | methyl alcohol 甲醇
-
AA：丙烯酸
主营产品:丙烯酸类 丙烯酸异辛酯(EHA) 丙烯酸丁酯(BA)、 丙烯酸异葵酯(IDA) 丙烯酸(AA) 甲基类多官能单体 甲基丙烯酸(MAA)、 甲基丙烯酸异丁酯(IBMA)、 甲基丙烯酸异辛酯(EHMA)、羟基类多官能单体 甲基丙烯酸羟乙酯(HEMA)、
-
methyl acrylate：(一四二) 丙烯酸甲酯
(一四一) 顺-丁烯二酐 Maleic anhydride | (一四二) 丙烯酸甲酯 Methyl acrylate | (一四三) 甲基丙烯酸 Methacrylic acid