溶接

基本解释 (translations)

cementing

与溶接相关的网络例句 [注：此内容来源于网络，仅供参考]

Analogous complexes 3a" and 4a"= CpRu(PPh32, Ar = para-C6H4OMe containing methoxy group at the para-position of gem-diphenyl group were similarly obtained from protonation of the corresponding acetylide complexes via formation of vinylidene intermediate. But only complex 3a'= CpRu(PPh32, Ar2 = fluorenyl is stable in solution, and decomposed to unidentified complex when heated to reflux in THF. Deprotonation of complex 4a in the presence of base gives neutral acetylide complex 6a.

在两个相邻位置的苯基对位位置上接有一甲氧基的衍生物3a"和4a"也可利用类似的质子化反应合成，唯有错合物3a'= CpRu(PPh32， Ar2 = fluorenyl 可以稳定於溶液中，不会进行上述反应，如将其溶於四氢呋喃溶液加热至沸腾则会分解产生无法鉴定的化合物。

Factory engaged in professional production and sales of high-speed automatic vacuum molding machine, high frequency plastic welding machine, blister sealing machine, the production of refined aluminum blister mold, copper mold, mold high-frequency, voltage-mode, copper engraving , the use of masks in Blister Packaging, PVC tape, transparent plastic boxes, CD sets, business cards of this, folders, jelly bag, such as soft PVC products, hardware products.

本厂从事专业生产销售全自动高速真空吸塑成型机，高周波塑胶溶接机，吸塑封口机，制作精致吸塑铝模，铜模，高周波模具，电压模，雕刻铜模，使用于吸塑罩包装，PVC胶带，透明胶盒，CD套，名片本，文件夹，果冻袋，等PVC软胶制品，硬胶制品。

This graft copoly-met,after being dried,could not be dissolved in most solvents including benzyl alcohol and m -cresol at room temperature,except the very polar ones,such as 98％ formic acid.

这种接枝共聚物一旦析出并干燥以后，在常温下不溶于包括苯甲醇、间甲苯酚在内的大多数溶剂，但却易溶于极性较强的溶剂如98％的甲酸。

Selected chemical composition and new technical skill improve the quality of tensile strength, toughness, meltability of the steel.

严格挑选化学成份，经新技术特别提炼后，能提高钢材本质伸延性、韧性、及溶接性，不容易爆裂。

The conditions to produce PP-g-PVOH with the highest SP 60% were: ethyl alcohol/butyl alcohol=30/70, NaOH%=0.5%, refluxing at 90℃ for 16hr.FTIR confirmed graft and saponification reactions, and it was identified that graft reaction influence porosity and morphology very little, but microparticles in PP granule were sightly swelled. There was a peak relationship between melt flowing index and GP and the flowing property was decreased with sponification reactions.

红外光谱证实了接枝和醇解反应的发生；孔隙率和PP粒子内部形貌观察的结果表明，接枝反应对粒子孔隙率的影响不大，但其内部微粒有所溶胀；接枝率增大，熔融指数呈现先上升后下降的趋势，对材料力学性能的研究表明，随PP-g-PVAc接枝率的增加，材料的断裂伸长率和拉伸强度先增加后降低，拉伸模量逐渐增加，材料的缺口冲击强度降低。

Both tartaric acid and citric acid grafted compounds were diffluent in organic solvent and insoluble in water.

酸性强弱顺序与接枝的小分子酸酸性强弱相同，接枝酒石酸和柠檬酸化合物在有机溶剂中易溶，水中难溶。

A series of sulphonated SBS were achieved by reacting SBS blockcopolymer with sulphuric acid, meanwhile, the blends of PVC andsulphonated SBS were studied. By means of strength capabilityexamination and DSC analysis, it was found the miscibility wasincreased after SBS was sulphonated.2 The chemical grafting of styrene and PVC membrane2.1 The reaction condition of graftingBy means of the swelling and seepage of Styrene to PVC film,St was grafted onto PVC film by the initiation of BPO .

采用硫酸对热塑性弹性体SBS进行磺化，得到不同磺化度的产物，并对其与PVC的物理共混进行了研究；通过力学性能及DSC测试，发现SBS磺化后增加了与PVC的相容性(来源：Af2a2a2BC论文网www.abclunwen.com)。2 苯乙烯与聚氯乙烯膜的化学接枝2.1 苯乙烯与聚氯乙烯膜接枝条件利用苯乙烯对PVC的溶胀渗透，在过氧化苯甲酚的引发下发生接枝共聚反应。

Graft copolymerization of acrylic acid and acrylic amide onto chlorinated polyethylene by the oil-swellable suspension graft copolymerization technique was studied, benzoyl peroxide was used as the free radical initiator and ethyl acetate as the sweller.

采用溶胀悬浮接枝共聚法，将水溶性单体丙烯酸、丙烯酰胺接枝到疏水性氯化聚乙烯大分子链上，合成双亲性接枝共聚物。

Two series of polyurethane acrylate grafted acrylic resins (Acr-g-TPU-PETA and Acr-gPPU-PETA) self-emulsifying systems are obtained by grafting -NCO group modified polyurethane acrylates with acrylic copolymer prepared from n-butyl acrylate, styrene,βhydroxyethyl methacrylate and acrylic acid The self-emulsifying systems showed Newtonian fluidity with viscosity closed to that of water, the solid contents were around 30% The T〓 of 15～4℃ for dried film before photocuring favored film formation at room temperature DSC and DMA results showed that PU-PETA is compatible with acrylic resin in the grafted resin The TG and dTG curves for Acr-g-PU-PETA samples were substantially different from the corresponding blends, and the brodened dTG peaks for photocured grafted resin suggest that there might be multiple interactions among chain segments The photocued film of the grafted resins self-emulsifying system exhibited good overall properties with polyurethane acrylate grafts ranging from 30% to 50%, and Acr-g-TPU-PETA series showed better properties than Acr-gPPU-PETA series The adhesion of the photocured film was 1～2 grade, impact strength was 50kg-cm and flexibility was 1mm The Shore hardness and the adhesion of the film decreased markedly if PETA was replaced by HEMA as photoactive group due to the lower C=C double bond content in the grafted resin The polyhydroxy amine-linked thioxanthones photoinitiators can be evenly dispersed in self-emulsifying system without color spot appearing in the dried film The films photocured with IV〓～IV〓 generally exhibited higher Shore hardness, gloss and solventresistance than that cured with Irgacure 2959 and did not induce the rusting of the iron substrate Pigmenting with titanium oxide had no effect on the photocuring The polyhydroxy amine-linked thioxanthone IV〓 and IV〓 can be new candidates for the formulation of titanium oxide pigmented photocurable water-borne coatings for their pale-yellow appearance and slight interference with the color of the coatings WB 4759 with high water-solubility coalesced and separated from the dried resin film, and even induced the rusting of iron substrate.

以丙烯酸丁酯，甲基丙烯酸-β-羟乙酯，丙烯酸及苯乙烯合成厂丙烯酸共聚树脂，并与含-NCO端基的聚氨酯丙烯酸酯接枝反应，经水性化后，得到两个系列（Acr-g-TPU-PETA和Acr-g-PPU-PETA）各5个不同配比的丙烯酸树脂接枝聚氨酯丙烯酸酯自乳化体系，粘度与水相近，为牛顿流体，固含量30％左右。光固化前干燥涂膜的玻璃化转变温度在-15℃～4℃之间，有利于室温下成膜。DSC及DMA谱表明两种树脂基本相容。Acr-g-PU-PETA的热失重行为明显不同于共混材料，接枝样dTG峰明显宽化，表明接枝样中链段之间的相互作刚有多重性，丙烯酸树脂与聚氨酯之间有一定的相容性。接枝树脂自乳化体系光固化涂层的综合性能以聚氨酯丙烯酸酯成分为50％～30％者相对较好，且以Acr-g-TPU-PETA系列更理想。光固化膜的附着力为1～2级，冲击强度为50kg·cm，柔软性多为1mm。以HEMA代替PETA作为接枝树脂的活性基团，碳—碳双键密度太低，光固化膜交联点太少，硬度和附着力均较差。多羟基胺连硫杂蒽酮光引发剂能均匀分散于树脂自乳化体系和接枝树脂干膜中，不出现色斑，光固化膜肖氏硬度一般高于以Irgacure 2959为光引发剂的光固化膜，光泽度及耐丁酮溶剂性能均有所提高，不会诱导铁基生锈，钛白着色对光固化结果几乎没有影响。本论文所合成的多羟基胺连硫杂蒽酮光引发剂IV〓与IV〓为浅黄色，对光固化涂层的颜色干扰较小，为配制钛白着色光固化水性涂料提供了新的光引发剂。水溶性太强的WB 4759在干膜中易聚结析出，且对所附着的铁基有诱导锈蚀作用。

The direct-current type spot welder,the circular telegram time is short,the cementing stable scope is broad,the formula memory function numerical code control spot welding power source,the single plane can correspond many kinds of weldings.

直流点焊机，通电时间短，溶接稳定范围广，各式记忆功能数码控制点焊电源，单机能对应多种材料焊接。

与溶接相关的网络解释 [注：此内容来源于网络，仅供参考]

weld all around：围焊=>全周溶接

weld 焊,焊接的,补焊=>溶接 | weld all around 围焊=>全周溶接 | weld appearance 焊缝外观

Random dissolve：(溶接效果)

Checkerboard down(下坠棋盘格) 11 | Random dissolve(溶接效果) 12 | Split vertical in(关门大吉) 13

Lap dissolve：迭溶

lap connection winding 迭接绕组 | lap dissolve 迭溶 | lap joint 搭接

additive dissolve：同前溶接(不知为何这儿也有)

Stretch延展 | Additive Dissolve同前溶接(不知为何这儿也有) | Cross Stretch似Cube Spin

dither dissolve：(抖)点状

Cross Dissolve直接溶接 | Dither Dissolve(抖)点状 | Non-Additive Dissolve无附加溶接(将原本抽离)

electric resistance welding：电阻溶接

Electric resistance thermometer 电阻温度计 | Electric resistance welding 电阻溶接 | Electric spark maching 放电加工(同

oxyhydrogen welding：酸水素溶接

oxyhydrogen gas 酸水素ガス | oxyhydrogen welding 酸水素溶接 | oxynatural gas burner 氧气天然气烧嘴

thermal spraying：溶射

溶质 solute | 溶射 thermal spraying | 溶接 welding

dissolves：溶接

director of photography DP摄影导演 | dissolves 溶接 | dolly grip 摄影机车台场务

atomic hydrogen welding：原子水素溶接

atomic heat ==> 原子熱 | atomic hydrogen welding ==> 原子水素溶接 | atomic mass ==> 原子質量