水溶性树脂

基本解释 (translations)

kino  ·  kinos

与水溶性树脂相关的网络例句 [注：此内容来源于网络，仅供参考]

The main contribution of this paper is summarized as follow:1 Copolymer acrylate resin including hydroxyl, carboxylic and amina(-NH_2) is a new type of antifogging system and ahydrophi- lic antifogging constituents which is not found before.2 Water-soluble acrylate resin hydrophilic antifogging coating material is a new-type environmental protection material which takes ethanol as solvent and whose pastiness is adjusted by deionized water.3 The quality rate of accessory soft monomer ethyl acrylate and accessory hard monomer butyl methacrylate is 6 to 4, the quality rate of functional monomers in all monomers is 20 percent, the quality rate of MAA in the functional monomers is 22 percent, the quality rate of β-hydroxyl ethyl acrylate in the functional monomers is 8 to 10 percent and the remainder of functional monomer is acrylic acid.4 Cross-linking agent methylol acrylamide belongs to self-cross-linking system.

本文的主要贡献概述如下： 1 含有亲水羧基、羟基和氨基(-NH_2)丙烯酸共聚树脂是一种新型高效的防雾体系，用的亲水防雾组分是前所未有的。 2 以乙醇为溶剂制得水溶性丙烯酸树脂具有很好的水溶性能和防雾性能，只需加入去离子水就可以调节它的粘度，是一种新型的环保型防雾材料。 3 辅助软单体丙烯酸乙酯和辅助硬单体甲基丙烯酸甲酯最佳配比为质量比6∶4；官能单体占单体总量的20%，甲基丙烯酸占官能单体总量10～15%，甲基丙烯酸β-羟乙酯占官能单体总量的8～10%，剩下的为丙烯酸。

The effects of modifying sodium silicate with polyacrylic amide, glucosan, kaolin clay, aluminum chloride (AlCl 3), sodium humate, soluble phenol aldehyde resin and home made soluble resin A abbrev.

探讨了聚丙烯酰胺，葡萄糖，高岭土，Al Cl3，腐植酸钠，水溶性苯酚-甲醛树脂和自制的水溶性树脂 A等对水玻璃改性的影响。

The effects of modifying sodium silicate with polyacrylic amide,glucosan,kaolin clay,aluminum chloride(AlCl 3),sodium humate,soluble phenol-aldehyde resin and home-made soluble resin Aabbrev.

探讨了聚丙烯酰胺、葡萄糖、高岭土、AlCl3、腐植酸钠、水溶性苯酚—甲醛树脂和自制的水溶性树脂A等对水玻璃改性的影响。

Specifically, it is applicable to the production of dissolvent type of coating materials such as formaldehyde phenol resin, alkide resin, epoxy resin, epoxy polyester and acrylic resin as well as water-soluble resin coating materials such as highly adaptable water-soluble epoxy ester dipping paint.

适用于酚醛树脂、醇酸树脂、环氧树脂、环氧聚酯以及丙烯酸树脂等溶剂型涂料以及各种水溶性树脂涂料（如：高适应性水性环氧酯浸涂漆等）；还可应用于厚浆型涂料、粉末涂料、有机钛防腐蚀涂料、带锈涂料和沥清漆、富锌底漆、防火涂料、耐热涂料等。

To exploit highly bioactive natural antifungal medicaments from starfish, water-soluble starfish glycosides from Asterias rollestoni were isolated and purified by macroporous resin column and silica gel column chromatography, and their antifungal bioactivities were also examined.

为了分离纯化出具有强抗真菌活性的水溶性海星皂苷，以罗氏海盘车腕为实验材料，利用水抽提方法获得水溶性海星皂苷粗品，依次利用大孔树脂和硅胶柱层析对水溶性海星皂苷进行了纯化，并对其抗真菌活性进行了测定。

The reaction mechanism of triglycidyl isocyanurate and the production process were briefly mentioned, but the characteristics of production process were introduced in detail.

简要介绍了TGIC工艺反应原理、工艺生产流程；重点介绍了该工艺特点，包括含盐废水处理及回收利用，用中和法处理含盐废水，可回收4%左右的环氧氯丙烷原料，工业用盐纯度达95%，用副产品法处理含盐废水，可产纯度89%的工业用盐，同时还可生产水溶性树脂副产品；废水封闭循环利用，使生产过程无废水排放；母液回收利用，可生产光敏树脂。

Two series of polyurethane acrylate grafted acrylic resins (Acr-g-TPU-PETA and Acr-gPPU-PETA) self-emulsifying systems are obtained by grafting -NCO group modified polyurethane acrylates with acrylic copolymer prepared from n-butyl acrylate, styrene,βhydroxyethyl methacrylate and acrylic acid The self-emulsifying systems showed Newtonian fluidity with viscosity closed to that of water, the solid contents were around 30% The T〓 of 15～4℃ for dried film before photocuring favored film formation at room temperature DSC and DMA results showed that PU-PETA is compatible with acrylic resin in the grafted resin The TG and dTG curves for Acr-g-PU-PETA samples were substantially different from the corresponding blends, and the brodened dTG peaks for photocured grafted resin suggest that there might be multiple interactions among chain segments The photocued film of the grafted resins self-emulsifying system exhibited good overall properties with polyurethane acrylate grafts ranging from 30% to 50%, and Acr-g-TPU-PETA series showed better properties than Acr-gPPU-PETA series The adhesion of the photocured film was 1～2 grade, impact strength was 50kg-cm and flexibility was 1mm The Shore hardness and the adhesion of the film decreased markedly if PETA was replaced by HEMA as photoactive group due to the lower C=C double bond content in the grafted resin The polyhydroxy amine-linked thioxanthones photoinitiators can be evenly dispersed in self-emulsifying system without color spot appearing in the dried film The films photocured with IV〓～IV〓 generally exhibited higher Shore hardness, gloss and solventresistance than that cured with Irgacure 2959 and did not induce the rusting of the iron substrate Pigmenting with titanium oxide had no effect on the photocuring The polyhydroxy amine-linked thioxanthone IV〓 and IV〓 can be new candidates for the formulation of titanium oxide pigmented photocurable water-borne coatings for their pale-yellow appearance and slight interference with the color of the coatings WB 4759 with high water-solubility coalesced and separated from the dried resin film, and even induced the rusting of iron substrate.

以丙烯酸丁酯，甲基丙烯酸-β-羟乙酯，丙烯酸及苯乙烯合成厂丙烯酸共聚树脂，并与含-NCO端基的聚氨酯丙烯酸酯接枝反应，经水性化后，得到两个系列（Acr-g-TPU-PETA和Acr-g-PPU-PETA）各5个不同配比的丙烯酸树脂接枝聚氨酯丙烯酸酯自乳化体系，粘度与水相近，为牛顿流体，固含量30％左右。光固化前干燥涂膜的玻璃化转变温度在-15℃～4℃之间，有利于室温下成膜。DSC及DMA谱表明两种树脂基本相容。Acr-g-PU-PETA的热失重行为明显不同于共混材料，接枝样dTG峰明显宽化，表明接枝样中链段之间的相互作刚有多重性，丙烯酸树脂与聚氨酯之间有一定的相容性。接枝树脂自乳化体系光固化涂层的综合性能以聚氨酯丙烯酸酯成分为50％～30％者相对较好，且以Acr-g-TPU-PETA系列更理想。光固化膜的附着力为1～2级，冲击强度为50kg·cm，柔软性多为1mm。以HEMA代替PETA作为接枝树脂的活性基团，碳—碳双键密度太低，光固化膜交联点太少，硬度和附着力均较差。多羟基胺连硫杂蒽酮光引发剂能均匀分散于树脂自乳化体系和接枝树脂干膜中，不出现色斑，光固化膜肖氏硬度一般高于以Irgacure 2959为光引发剂的光固化膜，光泽度及耐丁酮溶剂性能均有所提高，不会诱导铁基生锈，钛白着色对光固化结果几乎没有影响。本论文所合成的多羟基胺连硫杂蒽酮光引发剂IV〓与IV〓为浅黄色，对光固化涂层的颜色干扰较小，为配制钛白着色光固化水性涂料提供了新的光引发剂。水溶性太强的WB 4759在干膜中易聚结析出，且对所附着的铁基有诱导锈蚀作用。

The blends include the combination of one latex and another latex, especially hard latex and soft latex, latexes and water-soluble polymers, polymers with different chemical composition, and so on.

水性涂料用树脂的混合主要包括乳液和乳液的混合，特别是硬乳液和软乳液的混合，乳液和水溶性树脂的混合，不同化学成分树脂的混合等。

The temperature behavior in mats was measured using CopperConstantan Thermocouples, and the core temperature cure during both pressings was simulated by means of a computer under various conditions.Reflected-fluorescence microscopy and image analysis techniques were used to measure the flow and penetration of PF adhesive into the Polar flake under various steam-injection-vacuum-pressing conditions. The paper also studied the effects of adhesive and penetration on flakeboards'mechanical properties.

研究结果表明：采用聚合度较大的水溶性A阶酚醛树脂胶，可以比较有效地克服目前水溶性酚醛树脂胶喷蒸热压大片刨花板中的树脂胶过度稀释、渗透及胶线缺胶的问题；适当选择饱和蒸汽压力、喷蒸时机、喷蒸时间、蒸汽保持时间和抽真空处理程度，是解决目前水溶性A阶酚醛树脂胶在喷蒸热压中所存在的问题的另一个重要途径。

This article reviewed the research development of these watersoluble resins and their application on waterbased ink.

本文重点介绍这些水溶性树脂的研究进展及其在水性油墨中的应用情况。

与水溶性树脂相关的网络解释 [注：此内容来源于网络，仅供参考]

chondroitin：硫酸软骨素

包载治疗肠道紊乱的皮质激素药物时滞型释药系统采用在固体剂型外先后包羟丙甲基纤维素(HPMC)和肠溶性材料成的酮洛芬(Ketoprofen)片采用水/乙醇/聚乙二醇为溶剂,最后制成高黏度的另外,硫酸软骨素(Chondroitin)与"1,12-二氨基十二烷"的交联聚合物苯与丙烯酸树脂共聚物的释放效果更好,

Soluble glutenin：可溶性谷蛋白

水溶性树脂:water-soluble resin | 可溶性谷蛋白:Soluble glutenin | 水溶性共聚物:water soluble copolymer

kino：水溶性树脂

""水溶性树脂(kino)是一个复杂的程序建立吸引和封闭一个结束. 它能意指不同在结束之间在那不-nookie 朋友地域,而且在床单之间以你被吸引到的那一个女人作为结束. "

water solubility：水溶性;水溶度

水溶蓝 water blue | 水溶性;水溶度 water solubility | 水溶性树脂 water-soluble resin

soluble glass sand：水玻璃树脂砂

soluble fibre 可溶纤维 | soluble glass sand 水玻璃树脂砂 | soluble polyurethane 水溶性聚氨酯

water spinach：瓮菜

water soluble resin 水溶性树脂 | water spinach 瓮菜 | water spinning frame 水力纺纱机

terpene resin：萜烯树脂

萜烯树脂(Terpene Resin) 理化特性 为淡黄色透明、脆性固体. 具有无毒无臭,耐辐射,耐稀酸、稀碱,抗结晶,电绝缘性强等性能. 对各种合成物的相溶性好,易溶于苯、甲苯、汽油、松节油等有机溶剂,不溶于水,甲酸及乙醇等. 主要用途 适用范围广,在橡胶、胶粘剂、亚敏胶粘带、 ...