模拟型

基本解释 (translations)

mimotype

词组短语

analog type

与模拟型相关的网络例句 [注：此内容来源于网络，仅供参考]

The coordinate transformation and numerical integration was executed on the discretized tetrahedral elements based on which the 3-D MT vector-finite element method was implemented. A whole computation framework for 3-D vector-finite element method with unstructured mesh was given. Based on this some typical models were tested which has demonstrated that our algorithm could distinctively avoid problems caused by the fake solution and both the accuracy and efficiency were enhanced which made our algorithm has a bright future for further application.3. According to theory of Sobolev vector space and the discretization of Helmholtz space, the error estimate which was suitable for 3-D MT vector-finite element modeling was deduced by which the procedure of adaptive technique was guaranteed.4. Based on the fully unstructured tetrahedralization and optical strategy, the 3-D magnetotelluric h-adaptive vector-finite element method was presented through combining the error estimate. With this work, the accuracy and creditableness for 3-D MT complicatedly modeling was guaranteed.5. The 3-D magnetotelluric h-adaptive vector-finite element algorithm with unstructured mesh was implemented.

针对非结构化的四面体单元，采用坐标变换和数值积分方法，实现了MT三维矢量有限单元分析，建立起基于非结构化网格的三维MT矢量有限元计算流程，并对典型模型和国际标准电磁模型进行了数值模拟，结果对比和分析表明，基于非结构化网格的三维MT矢量有限元不仅消除了节点型有限元的伪解，而且具有很高的计算精度和速度，有广阔的应用前景。3、根据Sobolev函数的向量空间和Hemlholtz空间的分解，推导出基于残差的三维大地电磁矢量有限元后验误差估计公式，为三维大地电磁自适应矢量有限元数值模拟的实现奠定了基础。4、在完全非结构化四面体单元剖分及优化基础上，结合三维大地电磁矢量有限元后验误差估计公式，提出了基于非结构化网格的三维大地电磁h-型自适应矢量有限元计算策略，保证了对复杂大地电磁模型数值计算的精度和可靠性。5、实现了基于非结构化网格的三维大地电磁h-型自适应矢量有限元计算流程，对典型模型和国际标准电磁模型进行了数值模拟。

There are some disadvantages in conventional analog synchronizer such as fixed error threshold and fixed step size.

传统的模拟型同步环具有误差门限和步长固定的缺点。

In this study, we used the couple-mode theory for the simulation. We select the profile index of multimode fiber, profile index of mode conditioning patch cord and VCSEL output power as parameters for the simulation. The influence of using mode conditioning patch cord to the modal noise and modal coupling efficiency is showed.

利用模态耦合理论(Couple-Mode Theory)搭配多模光纤之折射率分布指数、多模模态调整转换跳接线之折射率分布指数及面射型雷射之模态分布，作为模拟计算依据，并利用OptSim模拟软体来模拟850nm面射型雷射与50μm多模光纤之光输出耦合情形。

Based on the structure of conventional analog synchronizer, a new digital project is proposed to overcome the disadvantages mentioned above.

针对这些弊端，在传统模拟型同步环结构的基础上，提出了一种新的数字型设计方案。

The geology research of carbonate reservoirs in Ordovician of Tahe oilfield showed that many large dissolved vugs and fractures were developed. The spread of the reservoir take on a very heterogeneous state. And the typical fractured-vuggy reservoirs was formed. According to the combination of the various spaces, the formation was divided into vuggy formation, fractured-vuggy formation and fractured formation. The research showed that development of the vug is relevant to the its position on the structure, the fractures, the water surface and the weathering surface. Multi-phase charge and recharge of the oil in the reservoirs resulted in the complexity of the fluid distribution. So the"Bottle Model"was brought forward to explain the movement of the water-oil contact. The special storage space and the complex fluid distribution lead to the unstability of the production and the complexity of the water cut. In order to explain the characteristic of the fracture-vug unit was brought forward and the basic principle and method of the partition of the fracture-vug unit was formed. The classification and evaluation of the units were performed according the reserve and energy. Based on the research of geology characteristic and the fluid flow in the reservoir the comprehensive numerical simulation plan of the fractured-vuggy reservoirs were established. Through the selection of the simulation unit, fluid flow type and parameter equivalent the triple media reservoir simulation model was established. Considering the practical application the model was resolved by the DKR decomposition conjugate grads method. Based on the fine reservoir description of Dsitrict IV of the Tahe oilfield the various space type were classified and combined together. The geology model of Unit S48 was constructed. Two typical single well model was established according to the geology and the dynamic phenomena. Finally the single well model and the Unit S48 were simulated by the triple media reservoir simulator. Via the local grid refinement and coarsening in the simulation good matchs were gained. Based on the results of the simulation the reserve distribution, percent of reserve produced in various space and the natural energy were analyzed. The fluid was storaged in the fractures and vugs mostly and more than 90% the produced oil came from the systems. The energy belonged to the active one. The results of simulation accorded with the fact and showed the validity and practicability the research and the simulator.

塔河油田奥陶系碳酸盐岩油藏的地质研究表明，其储层中发育着很多大型的溶蚀洞、缝，储层的平面展布呈现出极度的非均质性，形成了典型的缝洞型碳酸盐岩油藏，根据各种孔隙介质在储层中的组合，将储层分为了溶洞型、裂缝-溶洞型和裂缝型三类；研究表明溶洞储层的发育和构造位置、裂缝的发育、潜水面和风化面的位置等因素有关；多期充注的油气成藏模式导致了流体复杂的赋存状态，由此提出了所谓的"瓶子模型"，解释生产过程中油水界面的变化；特殊的储集空间类型和流体分布特征导致油田在开发过程中表现出很大的不确定性和含水变化的复杂性，为了合理的解释油气田开发过程中的动态特征，提出了"缝洞单元"的概念，并制定了"缝洞单元"纵横向划分的基本原则和依据及划分方法，并对"缝洞单元"进行了分类和评价；基于地质特征和流体在其中流动规律的研究，提出了缝洞型碳酸盐岩油藏的数值模拟综合解决方案，通过模拟单元的选择、流动类型和参数的等效，建立了三重介质油藏三维三相数值模拟模型，采用不完全LU分解预处理共轭梯度法进行了求解；在塔河油田4区精细油藏描述的基础上，将各种类型的孔隙空间进行了归类组合，建立了S48单元的地质模型；通过对油井生产动态进行分析研究，建立了两类和油井地质、生产动态相对应的单井模型；最后应用三重介质油藏数值模拟软件对单井模型和S48单元进行了数值模拟，通过局部加密和粗化等技术模拟流体流动规律，取得了很好的拟合效果；结合数值模拟结果，分析了各种介质中的储量分布、储量产出的百分比以及地层的能量，认为塔河油田缝洞型油藏中流体绝大多数储集于缝洞系统之中，所产出流体90%以上也来自于缝洞系统，其底水能量属于较充足的类型；模拟结果和油田实际情况符合较好，说明了地质研究和油藏数值模拟研究的正确性。

The geology research of carbonate reservoirs in Ordovician of Tahe oilfield showed that many large dissolved vugs and fractures were developed. The spread of the reservoir take on a very heterogeneous state. And the typical fractured-vuggy reservoirs was formed. According to the combination of the various spaces, the formation was divided into vuggy formation, fractured-vuggy formation and fractured formation. The research showed that development of the vug is relevant to the its position on the structure, the fractures, the water surface and the weathering surface. Multi-phase charge and recharge of the oil in the reservoirs resulted in the complexity of the fluid distribution. So the"Bottle Model"was brought forward to explain the movement of the water-oil contact. The special storage space and the complex fluid distribution lead to the unstability of the production and the complexity of the water cut. In order to explain the characteristic of the fracture-vug unit was brought forward and the basic principle and method of the partition of the fracture-vug unit was formed. The classification and evaluation of the units were performed according the reserve and energy. Based on the research of geology characteristic and the fluid flow in the reservoir the comprehensive numerical simulation plan of the fractured-vuggy reservoirs were established. Through the selection of the simulation unit, fluid flow type and parameter equivalent the triple media reservoir simulation model was established. Considering the practical application the model was resolved by the DKR decomposition conjugate grads method. Based on the fine reservoir description of Dsitrict IV of the Tahe oilfield the various space type were classified and combined together. The geology model of Unit S48 was constructed. Two typical single well model was established according to the geology and the dynamic phenomena. Finally the single well model and the Unit S48 were simulated by the triple media reservoir simulator. Via the local grid refinement and coarsening in the simulation good matchs were gained. Based on the results of the simulation the reserve distribution, percent of reserve produced in various space and the natural energy were analyzed. The fluid was storaged in the fractures and vugs mostly and more than 90% the produced oil came from the systems. The energy belonged to the active one. The results of simulation accorded with the fact and showed the validity and practicability the research and the simulator.

塔河油田奥陶系碳酸盐岩油藏的地质研究表明，其储层中发育着很多大型的溶蚀洞、缝，储层的平面展布呈现出极度的非均质性，形成了典型的缝洞型碳酸盐岩油藏，根据各种孔隙介质在储层中的组合，将储层分为了溶洞型、裂缝-溶洞型和裂缝型三类；研究表明溶洞储层的发育和构造位置、裂缝的发育、潜水面和风化面的位置等因素有关；多期充注的油气成藏模式导致了流体复杂的赋存状态，由此提出了所谓的&瓶子模型&，解释生产过程中油水界面的变化；特殊的储集空间类型和流体分布特征导致油田在开发过程中表现出很大的不确定性和含水变化的复杂性，为了合理的解释油气田开发过程中的动态特征，提出了&缝洞单元&的概念，并制定了&缝洞单元&纵横向划分的基本原则和依据及划分方法，并对&缝洞单元&进行了分类和评价；基于地质特征和流体在其中流动规律的研究，提出了缝洞型碳酸盐岩油藏的数值模拟综合解决方案，通过模拟单元的选择、流动类型和参数的等效，建立了三重介质油藏三维三相数值模拟模型，采用不完全LU分解预处理共轭梯度法进行了求解；在塔河油田4区精细油藏描述的基础上，将各种类型的孔隙空间进行了归类组合，建立了S48单元的地质模型；通过对油井生产动态进行分析研究，建立了两类和油井地质、生产动态相对应的单井模型；最后应用三重介质油藏数值模拟软件对单井模型和S48单元进行了数值模拟，通过局部加密和粗化等技术模拟流体流动规律，取得了很好的拟合效果；结合数值模拟结果，分析了各种介质中的储量分布、储量产出的百分比以及地层的能量，认为塔河油田缝洞型油藏中流体绝大多数储集于缝洞系统之中，所产出流体90%以上也来自于缝洞系统，其底水能量属于较充足的类型；模拟结果和油田实际情况符合较好，说明了地质研究和油藏数值模拟研究的正确性。

The objectives of this paper were to investigate the simulation and design of continuous multiple-station rolling forming process for a U-Section Steel Bar by CAE software-DEFORMTM Due to the limitation of elements number using a short strip 120mm went through all the stations to simulate the real continuous rolling forming on factory The roller gap was fixed as 0 30mm roll speed was 20 rad/sec and progressive angles were all equal for each rolling process which were the formed angle divided by by the number of station Three rolling processes were selected with 6 9 and 12 stations respectively During simulation processes two cases occurred Case A the strip was through a single station Case B the strip across two stations Because the strip laterals side was stretched and twisted during the process The model of case B closer to the practical process than case A and the calculated stress and strain on the tip of U section for case A were lower than these for case B by up to 15% From the result of case B for each process the stress for 12-station process was smallest 9-station process second and 6-station process next Because less-station can save larger cost and forming time but the bigger stress and strain for 6-station caused wrinkles on lateral sides not found on 9-station and 12-station Therefore 9-station process was a more suitable design than 12-station process smaller stretched and twisted and stress The progressive angles for 12-station was 7 5?

本文主要是以DEFORMTM有限元素软体模拟U型钢片连续道次成型与单一道次成型以确认单一道次模拟的是否可取代连续道次模拟之研究。因DEFORMTM 软体对於网格元素上的限制故使用较短素材120mm通过所有的成型站以模拟工厂实际连续成形方法。辊轮间隙固定为0 3mm；辊轮转速为20 rad/sec；弯曲角度的方法为将成型角度平均除以成型站数。有三种辊轮成型方式被选择分别为6站，9站，与12站。在模拟的过程中有两种现象会产生 Case A，素材通过单一成型站。Case B，素材会通过两个成型站。因为在模拟过程中素材的两端会有拉应力与扭力。Case B的模拟比Case A像实际的制程，并计算应力与应变在U型断面的Tip部中可发现Case A比Case B低约15%。从Case B的每站的结果可以得知，12站的成型应力最小，9站次之，6站最后。

It can be sorted into original type,combination type and simulation type,and it is characterized as bolshy,advanced and risky,and the qualification to innovate,namely the essential factors for innovational people,including strong innovation consciousness,enough knowledge,healthy body and mind and heated environment.

创新就其类型而言，分为原创型、组合型和模拟型；创新具有反叛性、超前性和风险性的特征；创新的条件是指创新者必备的基本要素：要有强烈的创新意识，要有足够的知识，要有健康的身心，要有激昂的环境。

Designed for the professional videographers, this is an extremely versatile tripod, ideal for MINI DV camcorders.

为专业人士设计的万能三脚架，模拟型DV的理想选择。

And, the α parameters of frequency chirping of the cutoff intensity modulator are given at first. The cutoff conditions of metal-clad strip or rib waveguides are analyzed by modifying dual effective index method and simple effective index method, respectively.

在理论上，详细论述了截止型强度调制器的工作机理，结合耦合模理论，用近似方法对截止型强度调制器的调制特性进行理论模拟，模拟结果与实验结果的变化规律基本相符合；并首次给出截止型单波导强度调制器频率啁啾α因子的模拟结果。

与模拟型相关的网络解释 [注：此内容来源于网络，仅供参考]

analog：模拟

为了研究图-144超音速客机的翼型,一架米格-21被改装用来试验大型弧边三角翼,这架米格-21就被称为米格-21I,也称米格-21"模拟"(Analog)为了提供良好的360度世界,米格-29是苏联第一架采用高点座舱的战斗机,飞行员高高地坐在除垂尾外机身的最高点,

continuous：连续型

其重要的属性与行为进行分析,且对各种物件(Objects)与事件拟实验后,所得到的结果可供管理者进行情境分析(What-if analysis)与决策的参考.Banks et al.(1995)指出模拟依时间连续与否,可分为连续型(Continuous)系统与离散型(Discrete)系统两种,

Configurational-bias Monte Carlo Simulation：构型偏倚蒙特卡罗模拟

基流自举补偿技术:Bias-Current-Cancellation Technique | 构型偏倚蒙特卡罗模拟:Configurational-bias Monte Carlo Simulation | Twostage Bias的例句:

phenocopy：表型模拟

真正要解决的,是那先天的部分,最终是自然发育成熟的,还是通过更为复杂的过程,如生物学上的"表型模拟"(phenocopy)而成熟的. 然而,皮亚杰对"表型模拟"的解释,却引起生物学家们的异议. 雅各布起而发言. 他说,生物学上的表型模拟指环境造成的生物体的改变,

phenocopy：拟表型,表型模拟

phenobarbital 苯巴比妥 | phenocopy 拟表型,表型模拟 | phenogenetics 发育遗传学

phenocopy, F- F：拟表型

phenocopy 拟表型 , 表型模拟 | phenocopy, F- F- 拟表型 | phenocritical period 表型临界期

analog simulation：模拟仿真

analog seismograph tape recorder,模拟磁带地震记录仪 | analog simulation,模拟仿真 | analog stereopotter,模拟型立体测图仪

analog simulation：模拟仿真,相似模拟

analog signal 模拟信号 | analog simulation 模拟仿真,相似模拟 | analog stereopotter 模拟型立体测图仪

interactive visualization：交互可视化 対話型可視化

■ interactive surface modeling 交互式表面模拟 対話型表面モデリング | ■ interactive visualization 交互可视化 対話型可視化 | ■ interflow 层间流 中間流出

phenotypic mixing：表型混合

表现度不一致 variable expressivity | 表型混合 phenotypic mixing | 表型模拟 phenocopy