样机

基本解释 (translations)

proto

词组短语

model machine

与样机相关的网络例句 [注：此内容来源于网络，仅供参考]

The writer also used the research vehicle standardized the hand-hold ranging laser sample produced by Chevon Corporation, and the measuring results turned out satisfying.

作者还使用实验样机对南京德朔公司生产的手持激光测距仪样机进行了近程线性化标定，获得了满意的测量结果。

Based on the foundation of the virtual prototype model of the medium-speed maglev train, using the mechanical dynamics and kinematics analysis software ADAMS, this paper expatiates on the following things. Firstly, it analyses the decouple of single magnetic bogie by the simulation and experimentation; secondly, adds the magnetic levitation control system to the single magnetic bogie model and simulates; thirdly, by simulating the motion of the train running on the different type of guideway, analyses the state of the train on the ramp and crankle;in the end ,this paper does a further research on how the magnetic levitation control system and guideway parameters affect the suspending gap when the train runs on the ramp and crankle .

论文在建立了中低速磁浮列车虚拟样机模型的基础上，借助于机械系统运动学及动力学分析软件ADAMS，首先从单转向架出发，仿真分析了磁浮列车单转向架的解耦能力；接着对单转向架样机模型进行了控制系统的仿真；然后对一辆整车在竖曲线和平曲线的运行在ADAMS中进行了仿真，分析了列车在坡道和弯道上的运行状态；最后对磁浮列车在坡道和弯道上运行时的系统性能进行仿真分析，进一步研究了控制系统和线路参数对磁浮列车悬浮性能的影响。

After that, the circuit designed is simulated in the PSpice environment, and finally get the elementary circuit. Tested and debugged in the laboratory for many times, the sample device finally works successfully, the performance of which caters to anticipation, by being applied effectively in the process of installation and debugging of the control system of Triggered Spark Gap in the "SanBao" series compensation station in XuZhou, Jiangsu Province.

随后针对文中的设计思想在PSpice环境下对电路进行了仿真，最终确定了基本的硬件电路，并通过在实验室的多次试验和调试研制出一台样机，该样机已在徐州"三堡"串补站火花间隙触发控制系统的安装调试过程中得到了应用，发挥了作用，其性能基本达到了最初的设计要求。

The flexible body concept is introduced to constitute the virtual prototyping continuum model of the longitudinal vibration and the transverse vibration of the belt conveyor in the thesis, and the two virtual prototyping models are analyzed in an emulation mode.

本文将柔性体概念引入带式输送机纵向振动连续模型虚拟样机和带式输送机横向振动虚拟样机的建立中，并对这两种虚拟样机进行了振动仿真分析。

Firstly this paper dissertates the significance, principle, workflow and characteristics of remote digital proof. Moreover, it puts forward the color management scheme of remote digital proof. And then, through experiments, it describes the process of native digital proof, including setting up ICC Profile which reflects printing characteristics, basic linearization and digital proofer's linearization, setting up ICC Profile which reflects characteristics of digital proofer's paper and ink, and so on. On the basis of that, the process of remote digital proof is set up and realized, including setting up original proof and remote proof. Besides, the chromatism and resolvent is analysised. The color consistency between the two digital proofers is realized. Finally, by setting up RSA digital signature of remote digital proof, the security of network transmission and validity of digital signature is assured.

本论文首先阐述了远程数码打样的意义、原理、组成及特点，并提出了远程数码打样的色彩管理解决方案；然后，通过实验说明了本地数码打样的输出过程，包括创建反映印刷工艺特性ICC Profile、数码打样机基本线性化及数码打样机线性化、创建反映数码打样机纸张、墨水特性的ICC Profile等等；在实现本地数码打样输出的基础上，基于Best Remoteproof建立和实现了远程数码打样，包括创建本地校样和远端校样；并且分析了色差数据以及解决方法，实现了两台远程数码打样机之间的色彩一致性；最后，通过建立远程数码打样的RSA数字签名方案，保证了网络传输数据的安全性以及数字签名的有效性。

From point of view of the model requirement in the design process of VP, the characteristics of an integrated VP model are given. Based on the Analyzable Product Model theory developed by Tamburini and Engineering Data Model theory developed by Eastman, the formal description of integrated model of VP is developed, and the application wrapper and the interface components are also designed.

本章中从虚拟样机设计过程中对模型的需求出发，提出虚拟样机一体化模型应该具有的功能特点；在Tamburini的可分析产品模型理论和Eastman的工程数据模型理论的基础上，提出虚拟样机一体化模型的形式化描述体系；接着对一体化模型的应用包装器和接口组建进行设计。

When illuminated with a broadband optical source at a fixed angle of incidence,linear translation of the grating always lead to a linear shift in the wavelength of the detected signals collected at a fixed angle.

考虑国内外的研究现状和结合现有的技术，西安某所开展了变栅距光栅位移传感器的研究，在样机实验中取得了圆满成功，并开始了从原理样机走向工程样机的研究。

Although the wall-climbing robot has been carrying out in the field of robotic system for many years, but the research is focused on the design of the mechanism and control system.

幕墙清洗机器人的研究主要集中在样机搭建、机构设计和控制系统构建等问题上，国内外已经出现了多种样机，研究成果各具特色，但总的说来研究工作仍然处在样机的研制和实验阶段，其关键技术与理论有待于进一步深入研究。

The rotor structure of the motor was improved for starting torque maximization. Both the electromagnetic and dynamic performances of the motor were optimized based on finite element method.

为提高样机的起动转矩，改进了样机的转子结构，并基于有限元法对样机的电磁性能和动力学性能进行优化。

The developed motor prototype was tested and its load characteristics were measured. The maximum stall torque of 0.48 N·m is reached which is 1.7 times as high as the conventional onesided TWUSM, and its idle speed is 86 r/min.

最后利用自行研制的电机样机进行了实验，该样机的最大堵转力矩是0.48 N·m，是与其相近尺寸的传统单面齿超声电机的1.7倍，样机的最大空载速度是86 r/min。

与样机相关的网络解释 [注：此内容来源于网络，仅供参考]

Virtual Machine：虚拟样机

虚拟样机(Virtual Machine)技术指在制造第一台物理样机之前,以机械系统运动学、多体动力学、有限元分析和控制理论为核心,将产品各零件的设计和分析集成在一起,建立机械系统的数学模型,从而为产品的设计、研究、优化提供基于计算机虚拟现实的研究平台.

proof press：打样机

proof machine 打样机 | proof press 打样机 | proofed breathable fabric 防水透气织物

SAH：树脂砂制样机

SAC锤击式制样机, | SAH树脂砂制样机, | SAR覆膜砂制样机,

cylinder galley press：圆压式活字版打样机

圆压式丝网印刷机cylinder screen printing press | 圆压式活字版打样机cylinder galley press | 圆压式打样机cylinder proof press

cylinder galley press：中文:圆压式活字版打样机

中文:圆压式丝网印刷机cylinder screen printing press | 中文:圆压式活字版打样机cylinder galley press | 中文:圆压式打样机cylinder proof press

grab sampling machine：抓样机,手选取样机,简单取样机

grab sampling ==> 抓取法取样 | grab sampling machine ==> 抓样机,手选取样机,简单取样机 | grab spade ==> 攫斗铲,攫斗铲

offset proof press：胶版打样机

offset printing paper 胶版印刷纸 | offset proof press 胶版打样机 | offset proofing press 胶印打样机

cylinder proof press：圆压式打样机

圆压式活字版打样机cylinder galley press | 圆压式打样机cylinder proof press | 圆形字round letter

cylinder proof press：中文:圆压式打样机

中文:圆压式活字版打样机cylinder galley press | 中文:圆压式打样机cylinder proof press | 中文:圆形字round letter

sample making machine：打样机

sample jet dyeing machine 喷射坯染试样机 | sample making machine 打样机 | sample polishing machine 试样抛光机