架型结构

词组短语

network structure

与架型结构相关的网络例句 [注：此内容来源于网络，仅供参考]

Model structure form of photoelectric tracking platform mainly includes: adjust flat framework, base, perpendicularity axis, level axis, collimate framework and machine design of left or right load.

型结构形式的光电跟踪平台主要包括调平机构、底座、垂直轴、水平轴、照准架、以及左右负载部分的机械结构设计。

With the electrical connections at the top and bottom side of the wafer-level IC packaging Lead-frame structure and composition of the surface-mount semiconductor package structure Multi-layer printed circuit board Antifuse and its formation method and with the anti-fuse non-volatile memory device unit cell Tandem electric signal processing circuit and electronic device Light-emitting diode packaging structure and encapsulation method Electronic Packaging Structure Flip-chip high-speed optoelectronic components and structure Pairs of piezoelectric friction side by side to promote the three-step device and scanning probe microscope Light-emitting diode and its manufacturing method, the production base of light-emitting diode method Three or four parallel advance of stepping piezoelectric device and scanning probe microscope lens body Silicon substrate and its manufacturing method Semiconductor device and voltage-divider A polysilicon layer and the microcrystalline silicon layer of the double-substrate active layer structure, methods and devices The edge of the thickness of silicon controlled Of a lateral semiconductor devices and high-voltage devices With a vertical-channel transistors semiconductor device Of a memory array and for the manufacture of a memory array method Read-only memory cell array structure Active-matrix substrate and display device High-voltage semiconductor integrated circuit devices, dielectric isolated type semiconductor device Image sensing devices Lens module and its manufacturing methods Solid-state imaging device and camera Injection angle for the trench isolation Organic Light-Emitting Display Device Organic light-emitting display device Bipolar transistor structure of the surface passivation Double-triggered silicon-controlled rectifier HFET Metal-oxide semiconductor transistors Self-aligned trench accumulation mode field effect transistor structure Thin-film transistors and Display Devices TFT Lead Diode Low-frequency, low noise, low-flashing diode Used for thin-film solar cells trap light structure Transparent sun solar cells Quaternary semiconductor heterojunction photovoltaic cells heat Si nano-pillar array heterojunction thin-film solar cells GaN-based micro-composite solar cells isotope Optical sensor Semiconductor by optical components Imaging Detector Transparent conductive oxide coating Silicon-based high-performance dual-junction solar cells Thin-film solar cells Alien LED Devices

非专业，不在行，求高手帮忙。谢谢！具有顶部及底部侧电连接的晶片级集成电路封装导线架结构及其构成的表面黏着型半导体封装结构多层印刷电路板反熔丝及其形成方法和具有该反熔丝的非易失性存储器件的单位单元串联用电式信号处理电路及电子装置发光二极管的封装结构及其封装方法电子封装结构高速光电组件及其芯片倒装结构双压电体并排推动的三摩擦力步进器与扫描探针显微镜发光二极管及其制作方法、发光二极管的底座的制作方法三或四压电体并行推进的步进器及其扫描探针显微镜镜体硅衬底及其制造方法半导体装置与分压电路具多晶硅层及微晶硅层的双底材主动层结构、方法及装置硅晶片的受控边缘厚度一种半导体横向器件和高压器件具有垂直沟道晶体管的半导体器件一种记忆体阵列及其用于制造一记忆体阵列的方法只读内存单元阵列结构有源矩阵基板和显示装置高耐压半导体集成电路装置、电介质分离型半导体装置图像感测装置透镜模块及其制造方法固态成像装置和照相机用于沟道隔离的斜角注入有机电致发光显示装置有机发光显示装置双极晶体管的表面钝化结构双触发型可控硅整流器异质结场效应晶体管金属氧化物半导体晶体管自对准沟槽累加模式场效应晶体管结构薄膜晶体管及显示器件薄膜晶体管无铅二极管低频、低噪音、低闪烁的二极管用于薄膜太阳电池的陷光结构透明遮阳太阳能电池片四元半导体的异质结热光伏电池硅基纳米柱阵列异质结薄膜太阳能电池氮化镓太阳能同位素复合型微电池光学传感器半导体受光元件成像探测器透明导电氧化物涂层硅基高效双结太阳能电池薄膜太阳能电池异形LED器件

This text is divided into seven greatest parts totally, the first part is the analysises of the combined part of technic and construction; The second part is a coordination to combined part project design;The third part is the project reasoning of the assemble tongs, synthesizing the consideration with the economic angle and the technique,choice a reasonable and oecumenical design project of the assemble tongs;The fourth part is design of assemble tongs for combined part, primarily discussing the choice of framework、localizer and clamp;The fifth part is the instruction of assemble tongs in the combined part assemble;The sixth part is the instruction of technique term and actual technique problems handles in the design; The seventh part is the design of the

本文共分七大部分，第一部分是组合件的结构及工艺性分析；第二部分是组合件的协调方案设计；第三部分是组合件装配型架的方案论证，从技术和经济角度综合考虑，选择合理、经济的型架设计方案；第四部分是组合件的装配型架设计，主要论述了骨架，定位件和夹紧件的选择；第五部分是介绍了组合件装配型架的安装；第六部分是组合件装配型架的设计技术条件及实际技术问题的处理；第七部分钣金件加工设计。

The main jobs of this paper are as followed: 1 The reuse of the frame design technology for aircraft assembly fixtures is researched. a frame line part library is built with the templet driven technology, the reuse of the frame line part come true by the tools for instantiation and instance modification. The design resources are effectively used, some repeating work is cut. 2 Two methods to obtain the assembly feature are proposed: the straight way by the Enumeration method and the indirect way by project features to the assembly plane. All of the assembly features of the frame and the adjustable bearings are obtained by these two methods which makes the frame automatic assembly technology for aircraft assembly fixtures come true. 3 The frame automatic assembly technology aircraft assembly fixtures based on assembly features is researched. A binary tree assembly model is used to express the assembly information of the frame for aircraft assembly fixtures, the automatic assembly between the frame, the aircraft and the adjustable bearing is completed within the three steps: distribute, obtain and evaluate assembly feature. Finally, the efficiency of the frame assembly design is proved. 4The frame interpart modeling technology for aircraft assembly fixtures is researched, the intersection methods are concluded and the arithmetic of the single-cut, double-cut and inter-cut intersection is proposed, the interpart fast modeling of the frame design for aircraft assembly fixture come true. 5Based on the researches mentioned before, a sub-system of frame fast design for aircraft assembly fixture is developed on CATIA. The sub-system is used to design the aircraft assembly fixtures in a large aeronautics corporation and make a good- effect.

论文的主要工作如下： 1研究了飞机装配型架骨架设计重用技术，在总结归纳骨架线框结构类型的基础上，应用模板驱动的方法建立了骨架线框库，通过骨架线框零件的实例化和离线编辑实现骨架线框的重用，有效利用设计资源，减少重复劳动； 2提出穷举几何对象的装配特征直接获取方法，遍历零件模型的几何对象，从中捕捉所需装配特征，该方法简捷、高效；提出向装配面投影的装配特征间接获取方法，该方法在现有特征基础上生成装配特征，解决了部分装配特征难以直接获取的问题； 3研究了基于装配特征的飞机装配型架骨架自动装配技术，采用一种二叉树装配模型表达骨架的装配关系，并通过装配特征的分配、获取和赋值三个步骤，实现了骨架分别与飞机产品和可调支承的自动装配，避免了繁琐的人工交互操作，提高了骨架设计的效率和规范化程度； 4研究了飞机装配型架骨架零件间建模技术，在总结归纳骨架元件相贯处理方式的基础上，提出了骨架元件单剪切相贯、双剪切相贯和互剪切相贯的实现算法，简化了骨架相贯处理的过程； 5基于以上研究，在CATIA平台上开发了飞机装配型架骨架快速设计子系统，并应用于某大型航空企业的装配型架设计，提高了设计效率和设计质量。

Both were measured using X-ray single crystal diffraction. For the crystal in MeOH, X-ray in compound. In an ansymmetry unit, there are two Cu atoms, two ligands and twosolvent methanol molecules. The tetranuclear complex contains two kinds of Cucenter.

本文在MeOH中得到了阶梯型四核铜骨架配合物；在THF中得到了扭曲的立方烷型四核铜骨架配合物，经晶体结构分析表明，阶梯型四核铜骨架配合物是由两个Cu2被μ~3-剪刀撑二个醇羟基O所连接形成中心对称的二铜二聚体结构。

The calculated free vibration frequencies and mode shapes of the whole structural model compare well with measured values. The influences of the various supporting conditions upon the frequencies of the trashrack and the free vibration characteristics of the single rack bars were then studied.

对栅架整体结构模型的自振频率和振型进行了量测，并与数值计算结果作了对比，二者基本吻合，说明成果是可靠的；此外，还对栅架支承条件对拦污栅自振频率的影响以及单根栅条的自振频率特性进行了探讨。

Bucket Wheel Stacker feeder structure by the boom-and bridge-type two.

斗轮堆取料机按结构分臂架型和桥架型两类。

This thesis is based on crane dynamic theory and finite element theory, and utilized software platform of ANSYS. It realizes model analysis and transient analysis of steel rope and bridge structure. The data and conclusion offered effective method to bridge crane design. The thesis mainly includes:According to crane dynamic theory, established relevant dynamic model, and analyzed the dynamic properties of the bridge structure of the bridge crane, including the natural frequency, the model shape and the dynamic stress. A way to analyse the dynamic response of the bridge structure of the bridge crane which takes into account the dynamic properties of the steel rope pulley block has been explored successfully.

本文基于有限元理论和起重机动力学理论，以有限元分析软件ANSYS为平台，实现了计算机对钢丝绳系统和桥架的模态分析和瞬态动力学分析，得到的分析数据和结论对桥式起重机动态设计提供了有效的手段，论文主要内容包括：根据起重机动力学理论，建立了相关动力学模型，并对桥架结构进行动态性能分析(包括固有频率、振型以及动应力)的分析，探索出一种考虑钢丝绳滑轮组的动态特性在内的桥式起重机桥架结构动态应力分析的方法。

This thesis presents the studies of U-shape gantry structure of container gantry crane, and dynamic simulation and fatigue life estimation of its rigid anti-sway. The main contends are as follows: Supposed that trolley frame is composed of spring structure, due to larger trolley gauge of U-shape gantry structure. For the gantry crane, a series spring dynamic vibrating model with three masses, three freedoms of degrees is built in this thesis and vibrating calculus equations are precisely resolved by mode analyses rule.

本文研究集装箱门式起重机U型门架结构及其刚性减摇系统的动态仿真和疲劳寿命估算，主要内容如下：由于U型门架结构小车轨距较大，本文建立了考虑小车架为弹性结构时门式起重机的三质量三自由度串联弹性动力学振动模型，用模态分析法求解振动系统微分方程组的数值精确解。

Idlers use stamped bearing house. Using wide clearance bearing and multi-layer labyrinth seal improves service life, reduces rotation resistance and friction coefficient. Cast welding and keyless connection has been used for pulley, Hydraulic coupling and hard surface cone cylinder gear speed reducer for drive unit, angle type structure for head frame, so these improve starting performance, drive efficiency, load capacity and service life, reduce floor area and weight of equipment.

托辊采用了35°槽型前倾结构，辊子为冲压轴承座结构，大游隙轴承和册层迷宫密封，提高了寿命，降低了旋转阻力和摩擦系数，滚筒采用了铸焊结构和无健联接，驱动单元采用了液力耦合器和硬齿面圆锥圆柱齿轮减速机，头架采用角型结构，从而改善了启动性能，传动效率，承载能力和使用寿命，减少了占地面积和设备重量。

与架型结构相关的网络解释 [注：此内容来源于网络，仅供参考]

Annular ball bearing：向心球轴承

向心球轴承(annular ball bearing)是一种通用设计,能够在高速运动中承受不同大小的负荷. 该型的滚动轴承由成套精密滚珠和保持架以及内外圈组成. 其中标准的向心球轴承里有一个深沟结构,可以承受来自任意向上的径向负荷和较小轴向负荷.具有最大载荷能力的向心球轴承主要承受径向负荷. 该型号的滚动

tower crane：塔式起重机

塔式起重机(tower crane)的定义:臂架安顿在垂直的塔身顶部的可回转臂架型起重机. 塔式起重机的名词术语及其定义(或说明)如表所示. 编号名词术语英文定义(或说明)示意图1 塔式起重机的分类1.1 按结构型式分1.1.1固定式塔 ...

valence isomerism：价异构

价态起伏||valence fluctuation | 价异构||valence isomerism | 架型结构||network structure