方法

基本解释 (translations)

approach  ·  means  ·  measure  ·  medium  ·  method  ·  methods  ·  modus  ·  plan  ·  road  ·  system  ·  technique  ·  way  ·  wise  ·  wrinkle  ·  PROC  ·  approached  ·  approaches  ·  plans  ·  wrinkles  ·  gateways  ·  mediums  ·  recipes  ·  quomodo

词组短语

stepping-stone · ways and means

与方法相关的网络例句 [注：此内容来源于网络，仅供参考]

His methods of working include method of coming from the mass and working among the mass, that of stereotypical model, that of political mobilization, that of analysis like that of anatomization of a sparrow, that of combination of political work and administrative work, and combination of ideological-political work and practical work in all fields, etc.

思想方法包括：阶级和阶层分析的方法，矛盾分析的方法，实践第一和理论与实践相结合的方法；人民至上的价值选择和价值判断方法；工作方法包括：从群众中集中起来又回到群众中坚持下去的方法，典型示范的方法，政治动员的方法，解剖麻雀的方法，政治工作与行政手段相结合的方法，思想政治工作同不同领域具体业务工作结合的方法等。

His methods of thinking contain methods for analysis of social classes and groups, and contradictions, practice first and combination of theory and practice; methods of value choice of people's benefits above all else and value judgment. His methods of working include method of coming from the mass and working among the mass, that of stereotypical model, that of political mobilization, that of analysis like that of anatomization of a sparrow, that of combination of political work and administrative work, and combination of ideological-political work and practical work in all fields, etc.

思想方法包括：阶级和阶层分析的方法，矛盾分析的方法，实践第一和理论与实践相结合的方法；人民至上的价值选择和价值判断方法；工作方法包括：从群众中集中起来又回到群众中坚持下去的方法，典型示范的方法，政治动员的方法，解剖麻雀的方法，政治工作与行政手段相结合的方法，思想政治工作同不同领域具体业务工作结合的方法等。

The popular methods of remote sensing image classification have been generally analyzed and summarized. And the main methods are classification based on statistic, neural network classification, fuzzy classification, decision tree classification, expert system classification. Finally, the characters of each method have been summarized.

现综合分析了目前主要的遥感图像分类方法，将遥感图像分类方法归纳为：基于传统统计分析的分类方法、神经网络分类方法、模糊分类方法、决策树分类方法、专家系统分类方法，并对各种方法的应用情况进行了综述，并总结出各种分类方法应用特点。

Firstly, this paper investigated roundly the basic theory of the ambient vibration method, analyzed systematically the main methods of ambient vibration identification, and discussed their advantages and disadvantages. Then we established the finite element model of structural dynamics and test model and analyzed their mutual relation, improved MUSIC method and correlation function method in the harmonic identification, and gave the subspace method and correlation function method based on continuous model, which is multi-harmonic retrieve technique. And then, this paper also puts forward least-squares method to estimate directly structural physical and modal parameters; this approach replaced the derivative operator in the continuous time model with an equivalent approximation, and estimated the physical parameters of structures by the least-squares method. And then, we discussed the approximation methods of derivative and their convergence. Finally, this paper researched the modal parameters of a frame structure by the simulation and test. The results demonstrated that subspace method, correlation function method and the least-squares method are effective and stable respectively.

全面地研究环境振动识别方法的基本理论，系统地分析环境振动识别方法的主要方法，讨论它们的优点和不足；建立结(来源：6666AB44C论文网www.abclunwen.com)构动力学的有限元模型和试验模型，分析有限元模型与试验模型之间的相互关系；改进谐波识别中的MUSIC识别方法和相关函数识别方法，给出大型结构模态识别的连续型的子空间分解识别方法和相关函数识别方法，这个方法是多元谐波识别方法；提出直接识别结构的物理参数和模态参数的最小二乘方法，这个方法利用导数的近似值代替导数值，并运用最小二乘方法识别结构的物理参数，讨论导数近似值的选择方法，分析算法的收敛性；通过仿真计算和模型实验，研究高层框架结构的模态参数识别，验证子空间分解识别方法、相关函数识别方法和最小二乘识别方法的有效性，算法的稳定性；从理论和试验两个方面分析和研究噪声对识别精度的影响，影响识别精度的因素，以及部分模态成分的模态参数不能够被识别的原因。

In this paper, the theory, algorithm, and experiment of automatic object detection and tracking are studied in depth. It is firstly pointed out that the essential of Mean Shift method is a special Newton-Gaussian method. A new method named Fast Mean Shift is established to stretch the conservative step of Mean Shift method. The convergence and validity of this new method are proved in theory. And it is also proved that the convergence speed of Fast Mean Shift is faster than that of Mean Shift. The contrast experiments of searching the maximum possibility density of random of data sets in plane and 3D space are done. The results show that this new method can reduce the iterations greatly. A new object tracking method based on Fast Mean Shift is built to improve the object tracking performance, which is shown in the face tracking experiment with the tennis sequence provided by the Ohio State University, and the car tracking experiment with the car sequence provided by Kalsruhe University. The face trcking experiment with highly noised images show that the object tracking method based on Fast Mean Shift has strong anti-jamming ability. A new fast color object detection technology based on characteristic color is established, which use characteristic color distribution to compute the characteristic color vector of any area in an image quickly. With the high performance search method, the fast object detection is achieved. At last, using object tracker based on Fast Mean Shift and color object detector based on characteristic color with the Kalman filter, PID controller, searial communication and other technologies, automatic object detection and tracking system with control system is built. The availability and anti-jamming ability of this system are verified by some object detection and tracking tests in different scenes.

本文对目标自动识别与跟踪进行了理论、计算、试验三方面的深入研究，主要包括：首次指出了目标跟踪技术中常用的均值迁移方法的本质为一种特殊的高斯-牛顿方法，改进了均值迁移方法步长取值保守的弱点，建立了快速均值迁移方法，证明了该方法的收敛性、有效性以及收敛速度优于均值迁移方法；进行了平面和3维随机分布数据集的最大概率密度搜索对比试验，试验结果表明，快速均值迁移方法大大减少了迭代次数；建立了基于快速均值迁移的目标跟踪方法，利用俄亥俄州立大学提供的乒乓球序列图像和卡斯鲁厄大学的汽车序列图像，对人脸和汽车目标跟踪性能分别进行了对比试验，并进行了高噪声人脸图像目标跟踪试验，结果表明，基于快速均值迁移的目标跟踪方法有效提高了目标跟踪性能，具有很强的抗干扰能力；建立了一种新型彩色目标自动识别方法，采用特征色彩分布函数实现了对任意图像区域特征色彩矢量的快速计算，建立了高效的搜索方法，实现了彩色目标的快速识别；将基于快速均值迁移方法的目标跟踪方法、基于特征色彩的目标识别方法与卡尔曼滤波、PID控制、串行通讯等技术结合，建立了带有控制系统的快速目标自动识别与跟踪系统，并在不同场景下进行了目标自动识别与跟踪试验，验证了快速目标自动识别与跟踪系统的有效性和抗干扰能力。

METHOD OF MANUFACTURE 制造方法 Details on the method of manufacture are available from Perlite Institute, Inc.

细节的方法制造，可珍珠岩研究所，公司和它的成员。

Firstly, based on the analyzing the problems of the existing C~4ISR system architecture verification methods, the C~4ISR system architecture verification methods based on CADM is present, and the conception of this methods is given. Secondly, the basic connotation of this methods is studied form the views of the theory base and main superiority. Thirdly, the architecture information model is established, and based on this model the content framework of the C~4ISR system architecture verification methods is present. Lastly, the key techniques needed to solve in the framework is discussed.2. The verification methods of data categoricalness based on CADM are studied.

首先在分析现有体系结构验证方法所存在问题的基础上，提出了基于CADM的C~4ISR系统体系结构验证方法，并对该方法的概念进行定义；其次从理论基础和主要优势两个角度研究了基于CADM的C~4ISR系统体系结构验证方法的基本内涵；再次建立了体系结构信息模型，并以此为基础提出了基于CADM体系结构验证的内容框架；最后提出并解释了基于CADM体系结构验证方法所要解决的关键技术，包括基于CADM的数据完备性验证方法、可达性验证方法、数据一致性验证方法、系统结构合理性验证方法和作战规则合理性验证方法等。

By time-varying filtering, we realize the signal selectivity and interference suppression, especially for the signals with time-varying power spectrum. It is shown herein that conventional eigenstructure based methods are lower dimensional special case of the time-frequency subspace fitting method. The closed-form array response estimation algorithms for blind source separation in wireless communication is also developed in the dissertation by exploiting the data structure of second-order statistics of the array output in the presence of multipath. The proposed method achieves array response estimation with little constraint on signal property and propagation environment such as scatters or angular spread. Moreover, the array utilized here can be of arbitrary geometry and even uncalibrated. Since the closed-form solution is obtained, no misconvergency may occur and large amount of computation can be saved. The equivalent feed model and corresponding optimization designation are proposed to realize the downlink multi-user selective transmission. By coherent and non-coherent superposition of the electromagnetical field, multiple beams can be formed using a single array, so that each co-channel user signal is transmitted in each beam and will not interfered with each other. The proposed system scheme implements the digital beamforming and the channel allocation in the base band, therefore is suitable for the utilization of the radio software technology. The feasibility and effectiveness of the proposed model are proved by the RF experiment.

在窄带条件下，GSC－SSF方法还可以提高阵列的虚拟孔径，从而提高估计的性能；可以证明，Cyclic DOA 和SC-SSF方法可看作该方法的特例或近似； 3、提出了二维GSC－SSF方法和宽带谱相关DOA矩阵方法，利用信号的循环平稳特性解决了宽带条件下二维 DOA 估计问题，并具有阵元数少、计算量较小的特点； 4、提出了时频子空间拟合和宽带时频DOA估计算法，将联合时频分析的理论和方法引入到阵列信号的空间谱估计研究中，利用时变滤波实现信号选择性测向和干扰抑制，特别适合于谱时变信号；可以证明传统特征结构法可看作是时频子空间拟合方法的特例； 5、提出了多用户环境下阵列响应的估计方法——CARE方法，该方法对信号结构和传播参数（主要是散射源分布与角度散布）的约束较少，适用于各种几何结构的阵列甚至未校准的阵列，能够直接得到阵列响应的闭式解，因此计算量小、稳健性好，不存在收敛问题； 6、提出了针对多用户下行选择性发送的阵列等效激励模型、优化设计方法及其系统实现方案，通过空间场的相干叠加与非相干叠加使得单一阵列能够形成多个波束，并保证各波束内的用户信号各不相同且相互干扰最小；其系统方案具有在基带实现数字波束成形、信道分配并便于软件无线电实现的特点，其有效性已得到外场实测数据的证实。

In this paper Ⅰ successfully applied these methods to fault diagnosis, and presenting some new innovative machinery fault diagnosis method; First Ⅰ present a new gear wornout fault diagnosis method, this method use the vibration signal's time-frequency attribute and instantaneous phase undulation to accurately detect gear's fault, and by comparing with the traditional frequency domain analysis method, this method reveals that many nonlinear and nonstationary characteristic exist in gear's vibration, this tell us that if we use frequency domain analysis method without pay attention to the signal's characteristic, we could get wrong diagnostic result; Then Ⅰ present a new bearing fault diagnosis method, this method use ATVFD and Hilbert transform to do envelop demodulation,Ⅰ analyze the envelop with time-frequency method and find out that this method is more accurate then traditional method.Ⅰ also explain that the modulation of the fault to the carrier wave may also be non-stationary and nonlinear; Finally Ⅰ present a cylinder pressure measurement method of diesel engine by means of vibration, cylinder pressure is an important parameter of diesel engine fault diagnosis, the pressure measuring is simplified a lot by this method,Ⅰ also use the ATVFD and time-frequency analysis to realize it.

本文中将上述理论方法成功地应用到故障诊断中去，提出了几点创新性的诊断方法；提出了一种齿轮磨损故障诊断的新方法，该方法利用振动信号能量的时频域分布特征与瞬时相位波动特征可以进行精确的齿轮故障诊断，并通过与传统的频域诊断方法的比较，揭示出齿轮振动中存在的明显的非线性与非平稳特征，说明了不加选择地利用频域分析方法进行齿轮故障诊断很可能会得到错误的诊断结果；提出了一种轴承故障诊断的新方法，该方法利用ATVFD分解与Hilbert变换进行包络解调，并对解调得到的包络信号进行时频域分析，可以实现更加准确轴承故障诊断，说明了故障对载波信号的调制往往也是非平稳与非线性的；提出了一种利用振动信号进行柴油机汽缸内压力检测的新方法，柴油机汽缸压力的变化是柴油机故障诊断的重要参数，利用振动方法可大大简化汽缸压力的检测过程，该方法也是综合利用ATVFD分解与时频域分析方法实现的。

Socratic method 苏格拉底方法 Perhaps his most important contribution to Western thought is his dialectic method of inquiry, known as the Socratic Method or method of "elenchus," which he largely applied to the examination of key moral concepts such as the Good and Justice.

也许苏格拉底对西方思想的最重要的贡献是他辩证的质疑方法，这种方法被称之为&苏格拉底方法&或&反驳方法&，他主要把这种方法应用于对关键的道德概念的考察。

与方法相关的网络解释 [注：此内容来源于网络，仅供参考]

blister copper - methods for sampling and determination of moisture content：粗铜 - 采样方法及水分含量测定方法

e3007 黄铁矿及硫矿采样方法及水分含量测定方... | e3008 粗铜 - 采样方法及水分含量测定方法 blister copper - methods for sampling and determination of moisture content | e3060 铁矿石分析方法--测定铬量 metho...

critical path method (C.P.M：关键路(线)方法;主要矛盾线方法;统寿方法

临界数 critical number | 关键路(线)方法;主要矛盾线方法;统寿方法 critical path method (C.P.M.) | 临界点 critical point

Introduce Indirection：创建代表选定方法的静态间接方法

Introduce Parameter Object-用新的类替代参数集,并更新方法的所有调用者以将新类的一个实例作... | Introduce Indirection-创建代表选定方法的静态间接方法. | Introduce Factory-使用对新工厂方法的调用来替代构造...

method of sampling iron pyrites and sulfur ores：黄铁矿及硫矿采样方法及水分含量测定方法

e3006 矿石分析方法-测定锌量 methods fo... | e3007 黄铁矿及硫矿采样方法及水分含量测定方法 method of sampling iron pyrites and sulfur ores | e3008 粗铜 - 采样方法及水分含量测定方法 blister copper - metho...

monte carlo method：蒙特卡罗方法

[蒙特卡罗方法](Monte Carlo method) 蒙特卡罗(Monte Carlo)方法,或称计算机随机模拟方法,是一种基于"随机数"的计算方法. 这一方法源于美国在第二次世界大战中研制原子弹的"曼哈顿计划". 该计划的主持人之一、数学家冯.诺伊曼用驰名世界的赌城-摩纳哥的Monte Carlo-来命名这种方法,

numerical method：数值方法

因为研究的是数学问题,所用方法是数学方法,因此也称之为数值数学(numerical mathematics),数值分析是总称,对一个数学问题通过数值运算得到数值解答的方法,称为数值方法(numerical method),如果这数值方法可以在计算机上实现,

arrow diagramming：箭线图方法 +#Arrow Diagramming 箭线图方法

-#Arrow Diagram 箭线图+Arrow Diagram 箭线图 | -#Arrow Diagramming 箭线图方法 +Arrow Diagramming 箭线图方法 | -#Arrow Diagramming Method 箭线图方法+Arrow Diagramming Method 箭线图方法

azimuth distance positioning method：极坐标定位方法,*方位距离定位方法

极坐标定位,*距离方位定位 point coordinate positioning | 极坐标定位方法,*方位距离定位方法 azimuth distance positioning method | 极坐标定位方法,*方位距离定位方法 p olar positioning method

standard methods for calibration of mechanical soil compactors：机械方法压实的土壤鉴定方法

f2322 土壤渗水率测量方法 test methods for perm... | f2323 机械方法压实的土壤鉴定方法 standard methods for calibration of mechanical soil compactors | f2324 土壤工程学分类方法 method of classification o...

Test methode for hemp fibre--Part 1: Test method for oil content in hemp fibre：大麻纤维试验方法 第1部分: 含油率试验方法

大麻纤维 第3部分: 大麻落麻... | 大麻纤维试验方法 第1部分: 含油率试验方法 Test methode for hemp fibre--Part 1: Test method for oil content in hemp fibre | 大麻纤维试验方法 第2部分: 残胶率试验方法 Test m...