- 更多网络例句与提升式门相关的网络例句 [注：此内容来源于网络，仅供参考]
-
Lid done with stainless steel plate floor, built-silicate insulation, Furnace Door size 350 mm wide, 580 mm high, the overall lateral wall elevate electric holding furnace door, Furnace Door closure of the Furnace Door as a whole round , Furnace Door sealing performance enhancements, dial made of stainless steel by 1600 m / m turntable, used to load the workpiece, the entire wheel of the plane is not division, the operator can be stacked workpiece, as dial-rotation every 40 minutes a week , when the operator can not see dial in almost rotation, and Furnace Door open the larger operators can be arbitrary and out of the workpiece, and without time limits can dial in 20-60 minutes a week to arbitrary rotation speed, regardless of Furnace Door hoist, from the start of work on the dial continuous rotation, and there was no need for chain hoist Furnace Door, the need to stop rotating, just press the control cabinet, stop button, the gate Furnace Door, operators to seize its own, activated installed in the furnace door open and close button.
炉盖采用不锈钢板做底板，内置硅酸铝保温，炉门尺寸宽350mm，高580mm，侧墙体中整体向上提升式电动保温炉门，炉门关闭时整个炉门为一个圆形整体，炉门密封性能增强，转盘采用不绣钢制成1600m/m转盘，用以承载工件之用，整个转盘为平面不分工位，操作人员可以任意堆放工件，由于转盘每40分钟旋传一周，工作时操作人员几乎看不到转盘在转动，加上炉门开的较大，操作人员可以任意进出工件，而不受时间限转盘可以在20--60分钟旋转一周的时间任意调速，不论炉门启闭、转盘从启动工作就不间断的旋转，没有任何必要与炉门启闭进行联锁，需要停止旋转时，只需按下控制电柜上的停止按钮即可，炉门的启闭，由操作人员自行掌握，按动安装在炉门边的启闭钮即可。
-
Main production the following: single-Doo on coal, ring and belt conveyor raise more fighting, TD75 series of conveyor belts and DDJ steep conveyor belt, CG-trough feeder, Permanent Magnetic Separation, Cleaner Machine: heavy chain, ring chain, linked plate, the main boiler linked films, spiral Cleaner and other chain-Cleaner, SM-economizer, FB-explosion-proof doors, air preheater, ceramics and more of the dust collector, Ceramic multi-desulfurization dust collector, self-water bath desulfurization dust collector, XLP type, XZD-cyclone, muffler.
主要生产以下产品：单斗上煤机、圆环和皮带多斗提升输送机、TD75系列皮带输送机和DDJ大倾角皮带输送机、CG型槽式给料机、永磁磁选分离器、除渣机：重链、圆环链、板链、锅炉主链片、螺旋除渣及其它链条除渣机、SM型省煤器、FB型防爆门、空气预热器、陶瓷多管除尘器、陶瓷多管脱硫除尘器、自激水浴脱硫除尘器，XLP型、XZD型旋风分离器、消声器。
-
Ventilation system: Model A use top bright gas window and sliding fittings-ventialtion lock to achieve cross ventilation.Model B: with sound insulating device, your good will will come true - close door, enjoy ventilation moment.
通风系统：A横式利用上亮气窗及提升配件独有的换气锁座来实现室内外换气。B模式可通过加消音通风器实现关着门换气的美好愿望。
-
The main products: the national standard series of single, double-beam bridge crane, gantry crane, Elevator, the national standard DT-DY series of conveyor belt, screw conveyor, bucket elevator, rigid impeller feeder, the feeder disk Machine, grab, light crane, multi-purpose portal cranes, chain-Doumen Unloading machine, loading machines, Fudiao, chain-Doo Unloading, quay cranes port facilities and various large pieces of metal structures and other non-standard, widely used , Complete specifications.
国家标准系列单、双梁桥式起重机、门式起重机、电梯、国家标准系列DT型DY型胶带输送机、螺旋输送机、斗式提升机、刚性叶轮给料机、圆盘给料机、抓斗、轻型装卸桥、多用途门座起重机、链斗门式卸车机、装船机、浮吊、链斗卸车机、岸吊港口设备及各种大型非标准金属结构件等，用途广泛，规格齐全。
-
The bung uses the stainless steel plate to make the ledger wall, the built-in aluminum silicate heat preservation, the fire door size extends 350mm, high 580mm, in spandrel wall body whole upward promotion type electrically operated heat preservation fire door, when fire doorclosure the entire fire door is a circular whole, the fire door sealing property strengthens, the turntable uses the stainless steel to make the 1600m/m turntable, with take load bearing work piece, the entire turntable does not divide the location as the plane, the operators may pile up the workpiecewillfully, because turntable every 40 minutes turn on lathe biography one week, when work the operators did not look nearly the turntable in the rotation, the fire door starts in addition in a big way, the operators may pass in and out the work piece willfully, but is not limited the time the turntableto be possible in 20-60The minute revolves one week-long time to modulate velocity willfully, no matter the fire door opens shuts, the turntable from the start work on uninterrupted revolving, not any necessity and the fire door open shut carry on the interconnection, needs to stop when revolves, onlyneed press down on the control electricity tank's pause button then, the fire door opens shuts, grasps voluntarily by the operators, presses installs nearby the fire door opens shuts button then. Transfers the bottom type resistance furnace's temperature control part to use the microcomputer automatic
炉盖采用不锈钢板做底板，内置硅酸铝保温，炉门尺寸宽350mm，高580mm，侧墙体中整体向上提升式电动保温炉门，炉门关闭时整个炉门为一个圆形整体，炉门密封性能增强，转盘采用不绣钢制成1600m/m转盘，用以承载工件之用，整个转盘为平面不分工位，操作人员可以任意堆放工件，由于转盘每40分钟旋传一周，工作时操作人员几乎看不到转盘在转动，加上炉门开的较大，操作人员可以任意进出工件，而不受时间限转盘可以在20—60分钟旋转一周的时间任意调速，不论炉门启闭、转盘从启动工作就不间断的旋转，没有任何必要与炉门启闭进行联锁，需要停止旋转时，只需按下控制电柜上的停止按钮即可，炉门的启闭，由操作人员自行掌握，按动安装在炉门边的启闭钮即可。
-
The bung uses the stainless steel plate to make the ledger wall, the built-in aluminum silicate heat preservation, the fire door size extends 350mm, high 580mm, in spandrel wall body whole upward promotion type electrically operated heat preservation fire door, when fire door closure the entire fire door is a circular whole, the fire door sealing property strengthens, the turntable uses the stainless steel to make the 1600m/m turntable, with take load bearing work piece, the entire turntable does not divide the location as the plane, the operators may pile up the work piece willfully, because turntable every 40 minutes turn on lathe biography one week, when work the operators did not look nearly the turntable in the rotation, the fire door starts in addition in a big way, the operators may pass in and out the work piece willfully, but is not limited the time the turntable to be possible in 20-60The minute revolves one week-long time to modulate velocity willfully, no matter the fire door opens shuts, the turntable from the start work on uninterrupted revolving, not any necessity and the fire door open shut carry on the interconnection, needs to stop when revolves, only need press down on the control electricity cabinet's pause button then, the fire door opens shuts, grasps voluntarily by the operators, presses installs nearby the fire door opens shuts Niu then.
炉盖采用不锈钢板做底板，内置硅酸铝保温，炉门尺寸宽350mm，高580mm，侧墙体中整体向上提升式电动保温炉门，炉门关闭时整个炉门为一个圆形整体，炉门密封性能增强，转盘采用不绣钢制成1600m/m转盘，用以承载工件之用，整个转盘为平面不分工位，操作人员可以任意堆放工件，由于转盘每40分钟旋传一周，工作时操作人员几乎看不到转盘在转动，加上炉门开的较大，操作人员可以任意进出工件，而不受时间限转盘可以在20—60分钟旋转一周的时间任意调速，不论炉门启闭、转盘从启动工作就不间断的旋转，没有任何必要与炉门启闭进行联锁，需要停止旋转时，只需按下控制电柜上的停止按钮即可，炉门的启闭，由操作人员自行掌握，按动安装在炉门边的启闭钮即可。
-
The bung uses the stainless steel plate to make the ledger wall,the built-in aluminum silicate heat preservation, the fire door size extends 350mm, high 580mm, in spandrel wall body whole upward promotion type electrically operated heat preservation fire door, when fire door closure the entire fire door is a circular whole, the fire door sealing property strengthens,the turntable uses the stainless steel to make the 1600m/m turntable, with take load bearing work piece, the entire turntable does not divide the location as the plane, the operators may pile up the work piece willfully, because turntable every 40 minutes turn on lathe biography one week, when work theoperators did not look nearly the turntable in the rotation, the fire door starts in addition in a big way, the operators may pass in and out the work piece willfully, but is not limited the time the turntable to be possible in 20-60The minute revolves one week-long time to modulate velocity willfully,no matter the fire door opens shuts, the turntable from the start work on uninterrupted revolving, not any necessity and the fire door open shut carry on the interconnection, needs to stop when revolves, only need press down on the control electricity cabinet's pause button then, the fire door opens shuts,grasps voluntarily by the operators, presses installs nearby the fire door opens shuts Niu then.
炉盖采用不锈钢板做底板，内置硅酸铝保温，炉门尺寸宽350mm，高580mm，侧墙体中整体向上提升式电动保温炉门，炉门关闭时整个炉门为一个圆形整体，炉门密封性能增强，转盘采用不绣钢制成1600m/m转盘，用以承载工件之用，整个转盘为平面不分工位，操作人员可以任意堆放工件，由于转盘每40分钟旋传一周，工作时操作人员几乎看不到转盘在转动，加上炉门开的较大，操作人员可以任意进出工件，而不受时间限转盘可以在20—60分钟旋转一周的时间任意调速，不论炉门启闭、转盘从启动工作就不间断的旋转，没有任何必要与炉门启闭进行联锁，需要停止旋转时，只需按下控制电柜上的停止按钮即可，炉门的启闭，由操作人员自行掌握，按动安装在炉门边的启闭钮即可。
- 更多网络解释与提升式门相关的网络解释 [注：此内容来源于网络，仅供参考]
-
lift gate：提升式门,提升式闸门,提升闸门
lift gas return ==> 提升气体返回口 | lift gate ==> 提升式门,提升式闸门,提升闸门 | lift hammer ==> 提升锤,落锤
-
lift hammer：提升锤,落锤
lift gate ==> 提升式门,提升式闸门,提升闸门 | lift hammer ==> 提升锤,落锤 | lift height ==> 分层厚度