拉伸曲线

词组短语

stress strain curve

与拉伸曲线相关的网络例句 [注：此内容来源于网络，仅供参考]

Focusing on the doubtable results and abnormal stress-strain curves in the tensile test of high grade line pipe body,the effect on test results of sample preparation process was analyzed,and it is considered that strain aging was the main reason caused pipe body tensile test result abnormal.

针对高钢级输送管管体拉伸性能试验中发现的异常值和异常曲线，分析了试样制备过程对试验结果的影响，认为应变时效是造成管体拉伸试验结果异常的主要原因。

The value of strain-hardening coefficient can be determined from the slope of logσ-logε curve, which is numerically equal to the maximum uniform true strain. So the strain-hardening coefficient can be used to evaluate the extend of uniform plastic deformation.

由拉伸实验得到的logσ-logε曲线的斜率即为应变硬化指数，其数值与材料拉伸变形时的最大均匀应变相等，是衡量材料塑性均匀变形能力的力学指标。

The corrosion resistance of nanocrystalline nickel wascompared with that of Watt nickel and polycrystalline nickel plate in thesolution of NaCl and HCl by the methods of static soak and polar anodicpolarization curve and the mechanism of corrosion was analyzed. Themechanical property of nano- crystalline nickel was evaluated by macroscopictension and the microscopic process of deformation and fracture was observedby in-situ tension test under TEM.

在此基础上，采用差热分析、XRD 及 TEM 等手段研究纳米晶体镍的热稳定性；利用静态浸泡、阳极极化曲线等方法研究纳米晶体镍的耐蚀性能；采用宏观拉伸的方法考察了纳米晶体镍的力学性能，并用 TEM 原位拉伸法观察纳米晶体镍形变与断裂过程的微观过程。

Experimental results indicate that the serrations of stress-strain curve could be observed above 200℃ which resulted from dynamic recrystallization.

拉伸试验结果显示，在200℃以上的应力-应变曲线可以观察到有抖动的情形产生，这是由於材料在拉伸过程产生动态再结晶所导致。

Through analyzing error, it was shown the feasibility and the reliability of solving the new relationship of stress and strain by ordinary tensile curve.

通过对误差的分析，说明由一般的拉伸曲线求解该新型应力应变关系的可行性及可靠性。

Using the computer-controlled electronic universal testing machine to do stretching test, compressing test and bending test, along veins on the bottom stalk of Arundo donax L., the stress-strain curves under certain experimental conditions were acquired and analyzed.

该文利用微机控制电子万能材料试验机对收割期的芦竹底部的茎秆进行了顺纹拉伸、压缩、弯曲试验，获得试验条件下顺纹拉伸、压缩、弯曲的应力－应变曲线，并进行了分析。

Result The flexibility of the scaffold material was powerful. The load-elongation curve of the mechanical testing was similar to that of ACL, the maximum load, the ultimate stress and the Young's modulus of the scaffold materials were 52.61 N, 14.96 MPa and 202.08 MPa respectively. Human ACL cells displayed the representative characteristercs of the ligamentous fibroblasts, and synthesized extracellular matrix, such as type Ⅰand Ⅲ collagen protein. The scaffold materials had no cytotoxicity. Human ACL cells adhered, grew and proliferated well both on the surface and in the holes of the scaffold materials.

结果］韧带支架材料的柔韧性强，拉力测试的负荷－拉伸曲线与韧带的拉伸曲线相似，其最大负荷、极限应力和弹性模量分别为52.61N、14.96MPa和202.08MPa；体外分离培养的人前交叉韧带细胞呈典型的成纤维细胞特征，能在体外分泌Ⅰ、Ⅲ型胶原等细胞外基质；支架材料无细胞毒性，人前交叉韧带细胞可在支架材料上黏附、生长并分泌细胞外基质。

The sclera samples obtained after one month, two months, three months and six months were axial tensed in pretesting, relaxing, creeping and deforming. A series of dates and curves that represent conventional mechanical properties and viscoelastical properties were obtained.

选择简单可行的轴向拉伸的实验方法，分别对术后1月、2月、3月、6月加固条带区及对照眼相应区等5种兔眼巩膜试件进行预拉伸、应力松弛、蠕变及破坏的生物力学实验研究，得到一系列表示常规力学性质的数据和曲线，并进行统计、比较。

In this paper, the mechanical property parameters of the adhesive were gotten by tensile test on standard sample at first. Then the single lap joint test of tensile shearing strength was designed and the loading-displacement curve including the cracking load was obtained. The experimental research provides the certain basis for the further research and application on the automotive structural adhesive.

本文首先制作了结构胶粘剂标准试样，通过拉伸实验测试了胶粘剂的相关力学性能参数；然后设计了单搭接拉伸剪切强度试验，测得该类型试件的载荷－位移曲线以及破坏载荷等重要数据，为今后车用结构胶合技术的进一步研究应用提供一定的实验依据。

Composition of low molecular weight glutenin subunits and gliadins were investigated with thirty common wheat cultivars which are widely grown in Shangdong province. In our study we used acid polyacrylamide gel electrophoresis and SDS-polyacrylamide gel electrophoresis, analysed Sedimentation test, Protein content, Mixing time, Stability, Max-resistance to extension, Farinograph Quality Number and Extensogram area of the 30 common wheats. They have close relationship with the technology properties of noodle wheat cultivars.

本研究通过酸性聚丙烯酰胺凝胶电泳和SDS-聚丙烯酰胺凝胶电泳，分析了30个山东省种植面积较大且具有部分代表性的普通小麦品种的低分子量麦谷蛋白亚基和醇溶蛋白组成，测定了30个品种的蛋白质含量、沉淀值、面团形成时间、稳定性、粉质评价值、最大拉伸阻力和拉伸曲线面积等面粉及面团主要品质性状，分析了低分子量谷蛋白亚基和醇溶蛋白组成与面条小麦品质性状的关系。

与拉伸曲线相关的网络解释 [注：此内容来源于网络，仅供参考]

Extrude Face：拉伸面

Extrude Element拉伸元素 | Extrude Face拉伸面 | Extrude Face along Spline沿曲线拉伸面

ruled surface：直纹曲面

(2)基本造型功能的熟练使用 在利用UGNX进行SMC成型的覆盖件产品设计时,涉及基本曲线曲面操作比较多,如常用的直纹曲面(Ruled Surface)、拉伸面(Extruded Surface)、扫描面(Swept Surface)、缩放面(Enlarge Surface)、等距面(Offset Surf

SECTION SEC：生成剖面

120 Splinedit SPE 编辑一条光滑曲线 | 121 Section SEC 生成剖面 | 122 Stretch S 拉伸实体

stress-strain curve：拉伸曲线

stress relief 应力解除 | stress strain curve 拉伸曲线 | stretching 延伸

Tensile Stress-Strain Curve：拉伸应力~应变关系

应力集中系数:stress-strain of surrounding rock | 拉伸应力~应变关系:Tensile Stress-Strain Curve | 相对应力应变曲线:non-dimensional stress-strain curve

non-dimensional stress-strain curve：相对应力应变曲线

拉伸应力~应变关系:Tensile Stress-Strain Curve | 相对应力应变曲线:non-dimensional stress-strain curve | "901"品系:"901" strain

surface of revolution：旋转曲面

4)扫描特征是指采用建构的路径曲线与截面曲线扫掠而成的曲面特征,如放样曲面(Loft和Bidirectional Loft)、直纹曲面(Ruled)、扫描曲面(Sweep)、拉伸曲面(Extrude in Direction)、管形曲面(Tube)、凸缘曲面(Flange)及旋转曲面(Surface of Revolution).

upper yield point：上屈服点

YP:Yield Point---屈服点 (MPa)TS:Tensile Strength---抗拉强度(MPa)通常还有上屈服点(Upper Yield Point)和下屈服点区分(Lower Yield Point). 可以从样品拉伸试验曲线中得出结果!

ruled：直纹曲面

4)扫描特征是指采用建构的路径曲线与截面曲线扫掠而成的曲面特征,如放样曲面(Loft和Bidirectional Loft)、直纹曲面(Ruled)、扫描曲面(Sweep)、拉伸曲面(Extrude in Direction)、管形曲面(Tube)、凸缘曲面(Flange)及旋转曲面(Surf

single-pass drawing：一次拉伸、单道拉拔

sine curve正弦曲线 | single-pass drawing一次拉伸、单道拉拔 | single draught一道压下量、一次拉拔