- 更多网络例句与抗蚀的相关的网络例句 [注：此内容来源于网络，仅供参考]
-
Using Mo powder,Fe-B alloy powder,and Fe powder as raw materials,and adding Cr,Ni and C alloy and agent polyvinyl butyral,Mo_2FeB_2 hard alloy was clad on a Q235 steel substrate to form a new type of cladding material with excellent wear and cor- rosion resistance property by means of vacuum liquid phase sintering technique.
以Mo粉、Fe-B合金粉、Fe粉为基本原料，掺加适量合金元素Cr，Ni，C，以及有机粘结剂聚乙烯醇缩丁醛，采用真空液相烧结法在Q235钢基体表面制备Mo_2FeB_2硬质合金覆层，获得了力学性能良好且耐磨抗蚀的新型硬质合金覆层材料。
-
Dichromate colloid solutions employed in photoengraving provide acid resists through the action of light on the sensitized surface.
重铬酸盐胶液是照相蚀刻版所用的感光液及抗蚀膜。光线的照射引起它的抗蚀作用。
-
The main characteristics, such as the matching behaviors of films coated on substrates in fabrication of concave cylinder photoresist microlens arrays, the structural parameter design of photoetching mask which is relevant to the fabrication of the microlens, and control basis of photoresist mask technological parameters, are analyzed respectively.
分析了在光致抗蚀剂柱凹微透镜图形制作过程中的膜系匹配特性，与制作该种微透镜有关的光掩模版的主要结构参数，以及光致抗蚀剂掩模工艺参数的控制依据等。
-
A multi-layered mask includes a lithographically patterned photoresist and an un-patterned organic antireflective coating formed over a substrate layer to be etched.
多层掩模包括形成在待刻蚀的衬底层上平版印刷图形化的光致抗蚀剂和未图形化的有机抗反射涂层。
-
The BARC layer is etched with a significant negative etch bias to reduce the critical dimension of the opening in the multi-layer mask below the lithographically define dimension in the photoresist.
使用有效的负性蚀刻偏置蚀刻该BARC层以减小在该多层掩模中的开口的特征尺寸至在该光致抗蚀剂中的平版印刷所确定的尺寸之下。
-
Thermoplastic etching is 7building, paraffine, bitumen, stearic acid, and prepared by adding a small amount of ofmaize-erosibility-erosibility powder create ink, print by thermal print, press the design pattern, squeegee the ink to the glass surface, forming a anti-erodibility film.
热塑性蚀刻丝印，是将石蜡、沥青、硬脂酸等所配制的粘合剂，加入少量的抗蚀粉调制成抗蚀印料，通过热印丝网版，按设计图样，把印料刮印至玻璃表面，形成抗蚀膜的。
-
There are TAIHONG 2LPSE0503MW-250 single unadhesive ED flexible copper coated lamination and Nippon Steel CIPW-25080 single ED FCCL.Regards to photoresists, Dupont FX915 dry film would be the best choice for the production of COF FPC after the comparison in photosensitive property, resolution, adhesiveness and operating procedure between the different resist thicknesses of Dupont FX900 series.
光致抗蚀剂方面：通过对比杜邦FX900系列两种不同抗蚀层厚度干膜(FX930与FX915)的感光性能、分辨率、附着力、操作工艺等，确定出杜邦FX915(抗蚀层厚度15μm)为更适用于COF挠性印制板制作的干膜；并对干膜的曝光参数进行了优化，最佳曝光级数5级(相对于21级曝光尺)，曝光能量片式150mJ/cm~2、卷式110mJ/cm~2，使其更加适合于精细线路的制作。
-
Used in various inks and varnishes, and as an acid resist in photo -engravings.
用制各类油墨和清漆，并用作照相蚀刻版的抗蚀膜。
-
Used in various inks and varnish es, and as an acid resist in photo-engravings.
用制各类油墨和清漆，并用作照相蚀刻版的抗蚀膜。
-
Although forest canopy layer could prevent splash erosion effectively, clay was taken away by overland flow and run off easily, the erosion amount became less after removing the forest canopy and surface soil, while the splash erosion still produced in the surface layer; the splash function weakened after having water current, the starting particles were less than bareland, so removing the surface disturbed soil made the erosion amount and clay less, silty sand more than bareland, but unsteady, the wear and tear energy used by raindrop splash and current function for overcoming sediments separating and starting were comparatively large, sediments were very difficult to be started and transported, it explained that forest root systems could increase anti-erosion capability of forest vegetation, make rainfall-current system splash and export finer particles than bareland.
虽然林冠层能有效防止溅蚀的发生，但坡面流还是能带走粘粒部分，粘粒还是容易流失。去除林冠和表层土后，侵蚀量变得更少，但表层还是会被溅蚀，有水流后，溅蚀作用减弱，颗粒起动的比裸地的少，所以，去除表层扰动土后，侵蚀量更少，粉沙多，粘粒比裸地更少一些，但不稳定，雨滴击溅和水流作用用于克服泥沙分离起动损耗的能量较大，很难被起动输移，这说明森林植被根系的作用增加了林地植被的抗蚀力，使降雨一水流系统仅能溅起输出比裸地坡面更细小的泥沙颗粒。
- 更多网络解释与抗蚀的相关的网络解释 [注：此内容来源于网络，仅供参考]
-
anticorrosive：防蚀的;防蚀剂
anticorrosive additive 抗腐蚀添加剂 | anticorrosive 防蚀的;防蚀剂 | anticreaming agent 抗乳化剂
-
resist：抗蚀剂
因此,今后直接关系到成本竞争力的,不仅仅是生产工厂之间的差异,还包括不同的光源、重要零件(偏光板、驱动器IC等)、抗蚀剂(resist)材料和液晶材料的差异等.
-
undercut：侧蚀
至於另一种半氧化的Cu+则很难水溶,常附著在线路腰部流速较低的侧壁上,可当成护岸剂(Banking Agent),而使侧蚀(Undercut)得以减低. 为了降低水沟效应减少侧蚀与残足起见,5mil以下的细线应尽可能将待蚀刻的铜层逼薄,同时也还应将抗蚀阻剂逼薄.
-
Uniform rock structure：相同的岩石结构(resistence to erosion抗蚀能力)
1. Dendritic pattern树枝状水系 | Uniform rock structure相同的岩石结构(resistence to erosion抗蚀能力) | 2. Trellis pattern方格状水系
-
atramental：墨水色的
atramentprocess抗蚀磷化法 磷酸盐处理法 | atramental墨水色的 | Atranex阿特拉津
-
non corrodibility：不腐蚀性
non-correspondentbank 非往来银行 | non-corrodibility 不腐蚀性 | non-corroding 不腐蚀 抗蚀的
-
nonsaline alkali soil：非盐碱性土
"不锈的;抗蚀的","nonrusting" | "非盐碱性土","nonsaline alkali soil" | "无片理的","nonschistose"
-
photoesthetic：光觉的
photoerythema 光照性红斑 | photoesthetic 光觉的 | photoetch-resistresin 光致抗蚀剂树脂
-
development of plant genotypes：植物遗传型的发展
development of photoresist ==> 光致抗蚀剂显影 | development of plant genotypes ==> 植物遗传型的发展 | development of seed and pod ==> 种子和荚的发育
-
lightfast：日晒坚牢度 墨迹抵抗光照的能力
9 抗蚀性 镀铬层氧化膜层的耐蚀性能. anti-corrosion | 10 日晒坚牢度 墨迹抵抗光照的能力. lightfast | 11 水浸坚牢度 写在测试纸上的线条,浸入水中,在给定的时间内能保持清晰度的能力. water resistant