弹簧阀

词组短语

spring valve · spring-loaded valve

与弹簧阀相关的网络例句 [注：此内容来源于网络，仅供参考]

This item is a new type structure direct-acting overflow valve, which adopts dynamic pressure feedback principle. That is it adds a feedback cavity on common direct-acting overflow valve's core. When there is overfall on valve port, the hydraulic force of valve port will balance with feedback cavity's hydraulic force and spring force, so it can decrease spring's stiffness, just like adding a hydraulic spring, which works together with mechanical spring, so as to minish valve port pressure range.

本项目是一种新型结构的直动式溢流阀，采用动压反馈原理，在普通直动式溢流阀阀芯上增加一反馈腔，当阀口溢流时，阀口的液压力与反馈腔液压力和弹簧力相平衡，从而可以减小弹簧的刚度，等于增设了一根液压弹簧，使其和机械弹簧一起工作，以达到减小阀口压力变化范围的目的。

Increased valve spring stiffness is to increase the stability of a simple common methods, such as the range of 20 ~ 100KPa spring spring into 60 ~ 180KPa's big spring stiffness, using this method is mainly brought locator valve, otherwise, the use of valve to reprovision on the locator.

增大弹簧刚度是提高阀稳定性的常见的简单方法，如将20～100KPa弹簧范围的弹簧改成60～180KPa的大刚度弹簧，采用此法主要是带了定位器的阀，否则，使用的阀要另配上定位器。

Normal Open Type A unique application of the direct-acting valve structure, when power to the electromagnetic coil when the head is located in the coil around the core component may generate a static magnetic, gravity and Balance valves magnetic components to overcome the stem return spring will be moving core, together with the elastic Stem components suck up with effect, so that even in the solid components of the valve stem disc closely aligns closely with the valve seat and seal, the valve closed; power, the valve plate in the return spring and the stem components of gravity under restoration in situ, the valve opening, pipeline back to normal ventilation.

常开型 阀门应用独特的直动式结构，当给电磁头的线圈通电时，位于线圈周围的静铁芯组件便产生磁性，磁力克服阀杆组件重力和回位弹簧弹力后将动铁芯连同阀杆组件向上吸起，从而使固连在阀杆组件上的阀盘与阀座紧密贴紧而密封，阀门关闭；断电后，阀盘在回位弹簧及阀杆组件重力作用下恢复原位，阀门开启，管道恢复正常通气。&Gas solenoid valve works &是由中国电磁阀网提供的国际阀门新闻，译文仅供参考。另外，中国电磁阀网还提供相关产品搜索：电磁阀型号、电磁阀价格、电磁阀技术、电磁阀新闻、电磁阀生产商等。

Normal Open Type A unique application of the direct-acting valve structure, when power to the electromagnetic coil when the head is located in the coil around the core component may generate a static magnetic, gravity and magnetic components to overcome the stem return spring Needle Valves will be moving core, together with the elastic Stem components suck up with effect, so that even in the solid components of the valve stem disc closely aligns closely with the valve seat and seal, the valve closed; power, the valve plate in the return spring and the stem components of gravity under restoration in situ, the valve opening, pipeline back to normal ventilation.

常开型 阀门应用独特的直动式结构，当给电磁头的线圈通电时，位于线圈周围的静铁芯组件便产生磁性，磁力克服阀杆组件重力和回位弹簧弹力后将动铁芯连同阀杆组件向上吸起，从而使固连在阀杆组件上的阀盘与阀座紧密贴紧而密封，阀门关闭；断电后，阀盘在回位弹簧及阀杆组件重力作用下恢复原位，阀门开启，管道恢复正常通气。& gas solenoid valve works&是由中国电磁阀网提供的国际阀门新闻，译文仅供参考。另外，中国电磁阀网还提供相关产品搜索：电磁阀型号、电磁阀价格、电磁阀技术、电磁阀新闻、电磁阀生产商等。

Spring-loaded safety valve: 1 - guards; 2 - wrenches; 3 - Lo-conditioning units; 4 - valve cover; 5 - Spring on the Block; 6 - spring; 7 - stem 8 - Spring Block; 9 - Block-oriented; 10 - recoil disk; 11 - valve; 12 - positioning screw; 13 - conditioning sets of 14 - the valve seat; 15 - Qian Feng, 16 - Valve.

弹簧式安全阀：1—保护罩；2—扳手；3—调节螺套；4—阀盖；5—上弹簧座；6—弹簧；7—阀杆；8—下弹簧座；9—导向座；10—反冲盘；11—阀瓣；12—定位螺杆；13—调节套；14—阀座；15—铅封；16—阀体。

Spring-loaded safety valve spring is delivered to the valve on the container or force to balance the pipeline pressure by adjusting the elastic springs to balance the medium on the pressure valve control media pressure to achieve the objective of safety valve lever weights Is to use a heavy hammer through the transmission lever to force the valve to balance the pipe or container medium pressure by adjusting the weights of the valve to balance the role of media from the valve on the pressure, media pressure to achieve the purpose of control ; Pilot of the main safety valve by valve components and sub-valve, to promote the role of Vice valve main valve action, also known as the pulse safety valve.

弹簧式安全阀是利用弹簧传递到阀瓣上的作用力来平衡容器或管道内压，通过调节弹簧的松紧来平衡介质对阀瓣的压力从而达到控制介质压力的目的；杠杆重锤式安全阀是利用重锤通过杠杆传递到阀瓣上的作用力来平衡管道或容器内介质的压力，通过调整重锤对阀瓣的作用距离来平衡介质对阀瓣的压力，从而达到控制介质压力的目的；先导式安全阀是由主阀和副阀组成，借副阀的作用带动主阀动作，又称为脉冲式安全阀。

The following cases, to go with locator: 1, medium pressure high pressure big time; 2, valve diameter is large Forged Gate, Globe, Check Valves (DN 00); 3, high or low temperature control valve; 4, the action necessary to raise the speed control valve; 5, using standard signal, the operation of non-standard spring when the implementing agency (20 ~ 100KPa spring outside the range); 6, when used for sub-process control; 7, when the valve to achieve the reverse action (air to close each open-type gas conversion); 8, need to change the valve's flow characteristic time (you can change the positioner cam); 9, no spring actuator or piston actuator, the proportion of action to achieve the time; 10, electrical signals to operate pneumatic actuator must Distribution - gas valve positioner.

下列情况下，要配定位器： 1、介质压力高、压差大的时候； 2、调节阀口径大时（DN00）； 3、高温或低温调节阀； 4、需要提高调节阀的动作速度时； 5、用标准信号、操作气动管路截止阀非标准弹簧的执行机构时（20～100KPa以外的弹簧范围）； 6、用于分程控制时； 7、使阀门实现反向动作时（气关式和气开式互相转换）； 8、需要改变阀的流量特性时； 9、无弹簧执行机构或活塞执行机构，要实现比例动作时； 10、用电信号去操作气动执行机构时，必须配电-气阀门定位器。

The following cases, to go with locator: 1, medium pressure high pressure big time; 2, valve diameter is largeForged Gate, Globe, Check Valves (DN 00); 3, high or low temperature control valve; 4, the action necessary to raise the speed control valve; 5, using standard signal, the operation of non-standard spring when the implementing agency (20 ~ 100KPa spring outside the range); 6, when used for sub-process control; 7, when the valve to achieve the reverse action (air to close each open-type gas conversion); 8, need to change the valve''s flow characteristic time (you can change the positioner cam); 9, no spring actuator or piston actuator, the proportion of action to achieve the time; 10, electrical signals to operate pneumatic actuator must Distribution - gas valve positioner.

下面所开列情况下，要配定位器：一、介质压力高、压差大的时辰； 2、调节阀口径大时（DN00）； 3、高温或低温调节阀； 4、需要提高调节阀的动作速度时； 5、用标准旌旗灯号、操作气动管路截止阀非标准弹簧的执行机构时（20～100KPa以外的弹簧范围）； 6、用于分程节制时；七、使阀门实现逆向动作时（气关式和气开式互相转换）； 8、需要改变阀的流量特性时；九、无弹簧执行机构或活塞执行机构，要实现比例动作时； 10、用电旌旗灯号去操作气动执行机构时，必须配电-气阀门定位器。

Pay valve base , pay valve petal, main valve base, main valve petal, silent flat and piston Not Xiu steel Regulate spring Silico-manganese steel

阀体，阀盖，下阀盖灰铸铁铸钢主阀瓣付阀瓣弹簧硌钒钢付阀座，付阀瓣，主阀座，主阀瓣，默片，活塞不绣钢调节弹簧硅锰钢

The seat, spring cage, spring and disc assembly are now individual components.

阀座，弹簧阀笼，弹簧和阀瓣总成现在已成独立的部件。

与弹簧阀相关的网络解释 [注：此内容来源于网络，仅供参考]

spring loaded sparking plug：弹簧火花塞

spring loaded safety valve 弹簧安全阀 | spring loaded sparking plug 弹簧火花塞 | spring loaded valve 弹簧阀

spring-controlled float valve：弹簧操纵浮阀

spring-centered direction control valve 弹簧对中的方向控制阀 | spring-controlled float valve 弹簧操纵浮阀 | spring-disk valve 簧盘阀

Split pin,Discharge valve：放泄阀弹簧

114 放泄阀第二螺帽 Nut with gonnve,Discharge valve ディスチャージバルブ第二ナット | 116 放泄阀弹簧 Split pin,Discharge valve ディスチャージバルブスプリング | 117 顶套弹簧 Spring,Safety head ヘッドスプリング

back pressure spring valve：背压弹簧阀

back pressure relief valve 背压安全阀 | back pressure spring valve 背压弹簧阀 | back pressure test 背压试验

Valve spring seat：气门弹簧座; 阀簧座

valve spring retainer lock 气门弹簧锁销 | valve spring seat 气门弹簧座; 阀簧座 | valve spring seat key 气门弹簧座锁键

valve ring：阀弹簧

valvesetting阀蝶 | valve ring阀弹簧 | valvestem阀杆

SPRING VALVE：弹簧阀

"spring; torsion","扭力弹簧" | "spring valve","弹簧阀" | "spring washer","弹簧垫圈"

SPRING VALVE：弹簧阀; 弹簧活门

spring safety valve 弹簧安全阀 | spring valve 弹簧阀; 弹簧活门 | spring-balance safety valve 弹簧平衡安全阀

Direct spring loaded safety valve：弹簧式

弹簧薄膜式活塞式可调减压阀" id="tag_keys_links">减压阀 Spring diaphragm reducing valve | 弹簧式 Direct spring loaded safety valve | 弹簧座 Spring plate

Direct spring loaded safety valve：弹簧式平安阀

弹簧薄膜式减压阀 Spring diaphragm reducing valve | 弹簧式平安阀 Direct spring loaded safety valve | 弹簧座 Spring plate