- 更多网络例句与夹杂物相关的网络例句 [注：此内容来源于网络，仅供参考]
-
In this paper, analysis on the fissuring accident of ZGMn13Cr2Mo antifriction tup is performed, and the reason is believed to lie in serious casting defects of shrinkage cavity , porosity and inclusion.
对ZGMn13Cr2Mo耐磨锤头的断裂事故进行了分析，主要原因是存在着严重的铸造缺陷：缩孔、疏松和夹杂物。
-
Through the study of metallographic specimen and the inclusions through electrolyzation under SEM, it is indicated that the Ti-deoxidized products are globular compound inclusions with the size of 1~3μm in this experiment condition. With the technical of ion beam thinner the inner structure of these inclusions can be observed, whose core is Ti-O and outer is Mn-S. Based on EBSD the phase composition has been analyzed and it indicated that these globular compound inclusions are Ti2O3 and MnS with nucleating center Ti2O3, which can prompt to nucleate IGF.
在扫描电镜下通过对金相试样和电解提取的夹杂物研究表明，本实验条件下钢液凝固过程中析出的夹杂物是Ti-O-Mn-S形成的尺寸为1～3μm的球形复合夹杂物；通过离子减薄后观察了夹杂物的内部结构，中心是Ti-O化合物，外围是Mn-S化合物；通过电子背散射衍射对夹杂物的物相组成的分析表明了该复合夹杂物是有利于针状铁素体形核的Ti2O3和在凝固过程中以Ti2O3为核心形核的MnS。
-
Effect of inclusion on 16MnR steel plate resistance to HIC .
夹杂物对16MnR钢板抗氢致开裂的影响。
-
Ogawa: Influence of microhardness and inclusion on stress oriented hydrogen induced cracking of line pipe steel, ISIJ International, 1996, 36(3), 334-340
首秦高品质管线钢轧制后钢板中大尺寸 B 类夹杂物为 Al2O3含量在54－58%之间的 CaO-Al2O3夹杂物，这些夹杂物熔点在1495－1520℃之间，浇铸温度下处于液态，表明钢中 Al2O3夹杂物得到了良好的变性转变。
-
Gas valve ; surface pockmark ; 4Cr10Si2Mo steel ; nonmetallic inclusions
气门；表面麻坑； 4Cr10Si2Mo钢；非金属夹杂物
-
With the using of EMBR, the height variation of molten steel in mold is decreased obviously,the temperatrue of molten steel in mold increases about 10℃,the inclusion amounts in molten steel are less and their diameters are smeller,the biggest diameter is under 20 um.
采用电磁制动技术后，结晶器页面波动幅度明显降低，结晶器内钢也温度约上升10摄氏度左右，钢中非金属夹杂物数量较少且尺寸较小，未发现直径大于20um的夹杂物。
-
The inclusions are changed from chain shape with acute angle to spherical shape. Those are complex inclusions with the Zr containing inclusions are the nuclei for the inclusions, Al2O3 and / or MnS are located in the surface layer of the inclusions whose size is in the range of 1.0 to 3.0μm.
经过锆处理后，粗晶热影响区中的夹杂物由长条的尖角状变为圆形或近圆形，且都是含锆的复合夹杂物，含锆夹杂物作为形核核心，在其表层沉淀析出Al2O3和／或MnS，其尺寸在1.0~3.0μm之间。
-
The results indicated that a high volumetric ratio of acicular ferrite in the simulated weld metal can be obtained in case the ratio of manganese and silicon is in a certain range.
结果表明，当Si、Mn比在一定的范围时，焊缝中将出现高比例的针状铁素体；且在大尺寸奥氏体晶粒中的非金属夹杂物上形核，高密度微小的夹杂物(1μm以下)的弥散分布对其形核更为有利。
-
Most grades contain up to 25% non-attapulgite material in the form of carbonates and other inclusions.
最等级含有高达25 ％非凹凸棒材料的形式，碳酸盐和其他夹杂物。
-
Acicular ferrite microstructure in micro-alloyed steels, which nucleates around non-metallic inclusions, especially oxide inclusions, has high strength and good toughness and possesses strong grain-refining ability by itself. The ultra-fine grained steel with excellent weldability is likely to be produced by forming in materials a great number of fine and dispersive micro-inclusions which is helpful to induce AF to nucleate around them through oxide metallurgy technology.
微合金钢针状铁素体组织强度高、韧性好，在奥氏体晶内非金属夹杂物上诱导形核，具有很强的自身细化晶粒的能力，通过氧化物冶金技术控制钢铁材料形成大量细小、弥散，具有诱导AF形核能力的有益微夹杂物，有望获得焊接性能优良的超细晶粒钢。
- 更多网络解释与夹杂物相关的网络解释 [注：此内容来源于网络，仅供参考]
-
carbonaceous inclusion：碳质夹杂物
碳工具钢 carbon tool steel | 碳质夹杂物 carbonaceous inclusion | 碳质惰性物 carbonaceous inert material
-
globular cementite：粒状渗碳体
glissile dislocation 滑动位错 | globular cementite 粒状渗碳体 | globular inclusion 球状夹杂物
-
fish eye：鱼眼;白点
19. root crack 根部裂纹 | 20. fish eye 鱼眼,白点 | 21. line inclusion 链状夹杂物
-
impure：掺杂的;不纯的;未精制的
impulsing冲击;发生脉冲 | impure掺杂的;不纯的;未精制的 | impurity杂质;夹杂物
-
inclusion：夹杂物
附图见后)板材结构、孔铜厚度、孔铜完整情形、破铜(VOID)、流锡情形、钻孔对准及层间对准(layer to layer regisatration)、平环(Annular ring)、蚀刻情形、胶渣(Smear)情形、压板及钻孔情形、(有挖破Gouging、钉头、Nailheading )、渗铜扫把(Wicking)、孔铜浮离(Pullaway)、反蚀回(Negative Etchback)等,现分述于下:有否镀瘤
-
slag inclusion：夹杂物
slag hole 出渣口 | slag inclusion 夹杂物 | slag tapping boiler 液态排渣式锅炉
-
indexing hole：基准孔
Inclusion异物,夹杂物. | Indexing Hole基准孔. | Laser Soldering雷射焊接法.
-
Metallography microscope：金相测试
冲击试验Impact | 金相测试 Metallography microscope | 非金属夹杂物Determination of content of nonmetallic components
-
Nonmetal inclusion：非金属夹杂物
10 晶粒度 Grain size | 11 非金属夹杂物 Nonmetal inclusion | 12 显微组织 Microstructure
-
inclusions：夹杂物
混合型脉冲徽分-积分方程:impulsive integro-differential equations of mixed type | 夹杂物:Inclusions | 流速:Inclusions-removal