墨线

词组短语

the line in a carpenter's ink marker

与墨线相关的网络例句 [注：此内容来源于网络，仅供参考]

Guide along the penciled cutting line so that the kerf falls into the waste or surplus material.

让锯口指示线沿着工件上的墨线前行，也就是锯口落在了废弃或者富余的材料上。

Built in 1559, or the 38th year of the Jiaqing reign of the Ming, the garden is laid out in an intricate manner, with buildings out in an intricate manner, with buildings spaced providently and courtyards mutually con

这条线几乎贯穿整个墨脱，从走进墨脱到走出墨脱共需九天左右的时间，一路经历高原反映、恶劣天气、艰险环境重重考验，是对体力、毅力和智慧的挑战。

Position the forms according to ink lines, and then connect the forms with joint pieces. Put sponge bars into seams to prevent leakage of grouts.

d。 将模板对准墨线竖立就位后，用连接件将模板连成一体，板缝中嵌海绵条防止漏浆。

The wood is straight in line of inkline but torrefied into wheel,the camber of which is fit for the bow compass.Even if torrefied or insolated it will never turn straight,it is resulted from the curve of torrefying .

木料笔直得合于墨线，但把它熏烤弯曲而做成车轮，它的弯曲度就与圆规画的相合，即使再烘烤暴晒，它也不再伸直了，这是熏烤弯曲使它这样的啊。

Although much slenderer than the ink lines used for the Vajrapāni, when examined closely, for instance those of the nose and the outline of the face, they prove to be short and discontinuous blunt strokes of the brush, exactly parallel to the more exaggerated strokes of Pl.

此像的墨线比图58的金刚力士像还细，详细观察则发现，如鼻线和脸部轮廓线等不是一笔拉下来的，而是运用了短笔连接的方法，同一笔法，在图55的金刚力士像的描绘上更为夸张。

According to the wire electrode on the trajectory of the different forms of control, WEDM can be divided into three types:* is a copy-control, cutting their lines in advance to create the shape of the workpiece and the same mode *, When the rough machining parts and die at the same time * Clamping in the machine tool table, in the process of cutting wire electrode tightly * close to the edge of model for mobile track, thus cutting out the model * with the same shape and precision to work; another One is the optical tracking control, the cutting in line before the first parts in accordance with drawings by a certain ratio of enlarge depicts an electro-optical tracking maps, drawings will be processed when the machine electro-optical tracking placed on the stage, followed on the stage The first photo has to follow the ink line graphics track movement, and then through the use of electrical, mechanical linkage to control the machine tool table work together with the relative electrode wire Xiang Sixing do sports in order to cut out the pattern and shape of the workpiece to the same; a re - Is a digital process control, advanced digital automatic control technology, machine-driven process in accordance with the geometry of the workpiece before the parameters of good pre-processing CNC automatic completion of the processing, production do not look like without drawing board also plans to enlarge, in front of more than two Control in the form of higher precision processing and broad scope of application, at home and abroad for more than 95% of WEDM have been using digital technology.

根据对电极丝运动轨迹的控制形式不同，电火花线切割机床又可分为三种：一种是*模仿形控制，其在进行线切割加工前，预先制造出与工件形状相同的*模，加工时把工件毛坯和*模同时装夹在机床工作台上，在切割过程中电极丝紧紧地贴着*模边缘作轨迹移动，从而切割出与*模形状和精度相同的工件来；另一种是光电跟踪控制，其在进行线切割加工前，先根据零件图样按一定放大比例描绘出一张光电跟踪图，加工时将图样置于机床的光电跟踪台上，跟踪台上的光电头始终追随墨线图形的轨迹运动，再借助于电气、机械的联动，控制机床工作台连同工件相对电极丝做相似形的运动，从而切割出与图样形状相同的工件来；再一种是数字程序控制，采用先进的数字化自动控制技术，驱动机床按照加工前根据工件几何形状参数预先编制好的数控加工程序自动完成加工，不需要制作模样板也无需绘制放大图，比前面两种控制形式具有更高的加工精度和广阔的应用范围，目前国内外95％以上的电火花线切割机床都已采用数控化。

Contrast tests in three places during 1997 and 1998 showed that the trapping capability of 450Wlight was obviously stronger than that of 20W light.The fluctuation of trapped japanese pine sawyer,Monochamus alternatus was consistent with that of natural emergence.The pine wilt nematodeBursaphelenchus xylophilus can be extracted from trapped male and female adult bodies of JPS.

三地两年的对比试验结果表明，450W高压汞灯诱杀松墨天牛Monochamus alternatus Hope效果明显优于20W黑光灯，灯光引诱结果与松墨天牛自然羽出情况基本一致，灯光诱集的松墨天牛雌雄成虫体上均可分离到松材线虫Bursaphelenchus xylophilusNickle。

Wire electrode based on the trajectory of the different forms of control, WEDM can be divided into three types: one is shaped by the imitation controlled cutting in line in advance and work to create the same shape by mold, when processing the workpiece at the same time rough and on the mold clamping in the machine tool table, in the process of cutting wire electrode tightly against the mold on the edge of the track for the mobile, thus cutting out and die on the same shape and precision to the workpiece; another One is the electro-optical tracking control, to carry out the cutting line, before the basis of certain parts to enlarge the proportion of drawings depicts an electro-optical tracking map-processing machines will be placed in design stage of electro-optical tracking, tracking platform Photoelectric first line of graphics has always been to follow the track of the Mexican campaign, and then through the use of electrical, mechanical linkage to control the machine tool table, together with the workpiece so相似形wire electrode relative movement, thus cutting out the same shape and design to the workpiece; again a digital control, the use of advanced automatic control of digital technology-driven machine tool in accordance with the pre-processing parameters according to the workpiece geometry pre-processing procedures for the preparation of a good CNC auto-complete processing, the production does not require appearance on board the need to map to enlarge map of the previous two form of control has a higher machining accuracy and a broad range of applications, both at home and abroad more than 95% have adopted WEDM NC.

根据对电极丝运动轨迹的控制形式不同，电火花线切割机床又可分为三种：一种是靠模仿形控制，其在进行线切割加工前，预先制造出与工件形状相同的靠模，加工时把工件毛坯和靠模同时装夹在机床工作台上，在切割过程中电极丝紧紧地贴着靠模边缘作轨迹移动，从而切割出与靠模形状和精度相同的工件来；另一种是光电跟踪控制，其在进行线切割加工前，先根据零件图样按一定放大比例描绘出一张光电跟踪图，加工时将图样置于机床的光电跟踪台上，跟踪台上的光电头始终追随墨线图形的轨迹运动，再借助于电气、机械的联动，控制机床工作台连同工件相对电极丝做相似形的运动，从而切割出与图样形状相同的工件来；再一种是数字程序控制，采用先进的数字化自动控制技术，驱动机床按照加工前根据工件几何形状参数预先编制好的数控加工程序自动完成加工，不需要制作靠模样板也无需绘制放大图，比前面两种控制形式具有更高的加工精度和广阔的应用范围，目前国内外95%以上的电火花线切割机床都已采用数控化。切割属电加工范畴，是由前苏联人发明的，我国是第一个用于工业生产的国家，当时由复但大学和苏州长风机械厂合作生产的这是最早的机型叫复旦型，我们国内在此基础上发展了快走丝系统。欧美和日本发展了慢走系统LS

When a carpenter is about to plane or saw a piece of timber he draws a straight line using a thread.

当一个木匠要刨平或锯一块木材时，他以墨线画一条直线。

This indicator enables you to guide the saw along cutting lines penciled on the material being cut.

锯口指示线能够导引圆锯沿着被i切割工件上弹的墨线行进。

与墨线相关的网络解释 [注：此内容来源于网络，仅供参考]

Rick Burchell：墨线

铅笔: Mike Mignola | 墨线: Rick Burchell | 填字: Carrie Spiegle

chalk line：墨线

测手,司尺手 chainman | 墨线 chalk line | 铜版纸 chalk paper

Mercator sailing：恒向线航迹计算法

Mercator projection 墨卡托投影 | Mercator sailing 恒向线航迹计算法 | Mercator sailing 墨卡托航法

Mercator sailing：墨卡托航法

Mercator sailing 恒向线航迹计算法 | Mercator sailing 墨卡托航法 | Mercator track 恒向线航线

Mercator track：恒向线航线

Mercator sailing 墨卡托航法 | Mercator track 恒向线航线 | Mercator's mile 墨卡托海里

Mercator track：墨卡托恒向线

Mercator projection 墨卡托投影 | Mercator track 墨卡托恒向线 | mercerization 丝光处理;碱化

Sir, Stephen Montgomery on line one：斯蒂芬.蒙哥墨利在一号线

It won't happen again. Better not.|- 不会再有这样的事了 - 最好是这样 | Sir, Stephen Montgomery on line one.|斯蒂芬.蒙哥墨利在一号线 | Stephen,|斯蒂芬

rhumb line：恒向线

rhumb line sailing 墨卡托航迹计算法 | rhumb line 恒向线 | rhumb sailing 墨卡托航迹计算法

cordeau m：拉线,墨线

copulation f 交配 | cordeau m 拉线,墨线 | cordon-bleu m 烹饪大师

ink drawing：墨水画,墨线图

ink dot recognition ==> 墨水点识别 | ink drawing ==> 墨水画,墨线图 | ink droplet ==> 墨滴