增加物

基本解释 (translations)

additament  ·  augmentation

与增加物相关的网络例句 [注：此内容来源于网络，仅供参考]

Addition of chamfering shape on seating surface of joint bolt at atf cooler pipe area.

倒棱增加物的塑造在自动制冷管的范围内、头螺栓的座套表面。

By employing such a method, 5 series of elastomers, including natural rubbers, elastomeric polyester fibers and ethylene-octene, ethylene-methyl acrylate as well as SIS triblock copolymers, were investigated with the purpose of studying elongation induced phase structure and mobility changes of the samples. For NR samples, it was demonstrated that there exists a small amount of crystals at RT even for unelongated samples. For both NR and the soft segment of PEE, with the increase of elongation ratio, the elongation-induced crystallinity increases almost linearly in a certain region of R, in accord with the increase of the lamellar thickness of the crystals; The behavior of ethylene copolymers, in terms of elongation induced morphorpholgy changes, are quite different from NR and PEE. The crystals are found to be gradually destroyed with the increase of R, with accord with the decrease of the lamellar thickness; The motional behavior of the soft segment of SIS, changes from "liquid" to "solid", in terms of 13C NMR spin-lattice relaxation.For many of the aformented samples, the dependence of 13C spin-lattice relaxtion time T1 on R are different for different groups, indicating that the changes of mobility at MHz frequency region with elongation are different for different groups.

通过对天然橡胶、聚醚酯嵌段共聚物、乙烯-辛烯共聚物、乙烯-丙烯酸甲酯共聚物、SIS等高分子弹性体样品聚集态结构和分子运动的研究，获得了一些新的实验结果，如：给出了确切的实验证据，证明了室温下未拉伸的天然橡胶样品中存在着微量的结晶；发现随着拉伸比增加，天然橡胶及聚醚酯样品的软段部分会出现拉伸诱导的结晶，且结晶度在一定范围内呈现近似线性的增加，所形成晶片的厚度也随之逐渐增加；而乙烯共聚物随着拉伸比的增加，原有的结晶会被逐渐破坏，晶片厚度逐渐变薄，结晶中的缺陷逐渐增加；随着拉伸比的增加，SIS中PI软段部分的核磁共振弛豫行为会出现从液态到固态的转变等；在对上述多个体系的研究中，还发现不同基团的自旋-晶格弛豫时间随着拉伸比呈现不同的变化趋势，表明不同基团的高频运动随拉伸比增加有不同的变化规律。

Root-derived organic carbon is composed of three compartments: root detritus, root eaudates and root symbionts, which represents a large important and potential C sink in forest ecosystems, The known responses of root derived organic carbon and heterotrophic microbes to elevated CO2 were reviewed. Overall, increases in root biomass, productivity, and exudation indicate an augmentation of C inputs into the soil via roots, although changes in root lifespan are still unclear and may modify this flux positively or negatively, Altogether, changes in root chemistry and morphology that may augment soil C storage under elevated CO2 include decreased N concentration and wider root diameter, Alternately, a shift in rooting depth upwards in the soil profile may increase average turnover rates of root detritus. Effects of CO2 concentration on C qualities of root exudates and root symbionts are the least understood components discussed here, Changes of soil heterotropic microbial activity and community under elevated CO2 still remained large uncertainties.

林木根源有机C包括根东通过根枯落物、根系分泌物和根共生菌周转3条途径向土壤输入的有机C，它是森林生态系统中一个重要的、潜在的C汇，综述了根源有机C与其微生物对CO2浓度升高的响应，虽然对根系寿命的变化尚不清楚，但CO2浓度升高将导致根系生物量、生产量、死亡量和分泌物的增加；同时，CO2升高亦促使根共生菌生物量的增加而增加了共生菌的C归还潜力，表明CO2升高使根源有机C的输入增加了，CO2农度升高情况下，根系化学性质和形态特征的这些变化均有利于增加土壤C的吸存；而根分布深度的降低则对土壤C吸存不利；CO2浓度升高对根分泌物和根共生菌质量的影响研究则极少，CO2浓度升高下土壤微生物活性和群落组成的变化存在较大的不确定性，目前CO2浓度升高下林木根源有机C对森林长期C吸存的贡献仍很不清楚。

The result indicated that we can get stable homopolymer and copolymer emulsion with uniform size distribution, when the ratio of sodium polyether sulfovinate modified polysiloxane to sodium lauryl sulfate was two, the quantity of the emulsifiers ranged from 6% to 8%, the quantity of initiator ranged from 0.4% to 0.8%, the stirring speed ranged from 200rpm to 250rpm, the polymerization temperature was 80 centigrade degree. As for the copolymer emulsion, the more the TRIS content in the monomers, the larger the water contact angle of their films became, namely, the surface energy of the copolymer films increased with the TRIS content in the monomers. In addition, the glass-transition temperature of the copolymers ranged from high temperature region to low temperature region with the increasing of TRIS content in the monomers.

结果表明：当乳化剂用量在6%～8%、改性乳化剂与十二烷基硫酸钠复配比为2：1、引发剂用量在0.4～0.8%、聚合温度为80℃、搅拌速度在200～250rpm时，得到的均聚物和共聚物乳液稳定，而且粒径分布均匀；对于共聚物乳液来说，随着单体中TRIS含量的增加，所得聚合物膜的水滴接触角增加，即其表面能增加：另外，随着共聚单体中TRIS含量的增加，共聚物的玻璃化转变温度从PMMA的Tg的高温区向PTRIS的Tg的低温区移动。

In order to assess the change of triploid populus tomentoza pulp plantation long-term-site productivity, The paper studied on effects of aboveground litterfall, fine root turnover and wet dust precipitation in nutrient cycling of triploid populus tomentoza pulp plantations at different ages,namely 2a、4a、5a、6a.It studied influence of different factors on decomposition of leaf、tree bark and twig of triploid populus tomentoza to select the operations to accelerate the decomposition and nutrient release. Finally, it studied influence of different intercrops on plantation site productivity and the relationship of intercrops and triploid populus tomentoza to select suitable intercrops. The main results as follows:(1)The aboveground litterfall of triploid populus tomentoza increased along with age from 216.03±59.7gm~(-2) at 3a to 482.38±101.3gm~(-2) at 7a, The N returned by litterfall wasl8.38±2.46kg.hm~(-2)a~-121.63±2.25kg.hm~(-2a~-139.51±4.61kg.hm~(-2a~-138.89±4.89kg.hm~(-2a~(-1) at 3a、5a、6a、7a respectively. The P returned by litterfall was 5.80±0.62kg.hm~(-2)a~(-1)、8.16±0.94kg.hm~(-2)a~(-1), 11.31±1.33kg.hm~(-2)a~(-1)、11.76±1.37kg.hm~(-2)a~(-1) at 3a、5a、6a、7a respectively. The nutrient returned by fine root turnover increased along with age, too. The N returned by fine root turnover was 3.85±0.41kghm~(-2)a~(-1)、5.22±0.63kghm~(-2)a~(-1),7.62±0.89kghm~(-2)a~(-1),9.17±1.22kghm~(-2)a~(-1) at 3a、5a、6a、7a respectively. The P returned by fine root turnover was 0.73±0.07kghm~(-2)a~(-1)、1.69±0.09kghm~(-2) a~(-1)、1.92±0.31kghm~(-2)a~(-1)、1.96±0.21kghm~(-2)a~(-1) at 3a、5a、6a、7a respectively. The leaf was the principal pathway to return nutrient to soil among litterfall, fine root turnover and wet dust precipitation. The proportion of returned N by leaf was 74.84%、71.96%、78.58%、75.03% at 3a、5a、6a、7a respectively,The proportion of returned P by leaf was 85.93%、80.31%、83.04%、83.23% at 3a、5a、6a、7a respectively. Therefore, it is important to protect and utilize the leaf in order to maintenance and enhance the long-term-site productivity of triploid populus tomentoza pulp plantation.

本文采取时序研究法，以3a、5a、6a、7a共4个不同年龄的三倍体毛白杨纸浆林为对象，研究了地上凋落物、细根周转、湿沉降在林分N、P营养元素循环中的作用及不同年龄林分N、P营养元素循环的特征，以评价三倍体毛白杨纸浆林长期立地生产力的变化；采取网袋法研究了不同因素对落叶、树皮、树枝分解的影响，以确定加快其分解、促进养分释放的措施：同时研究了不同间作物对林地影响、林木与间作物之间关系，以选择能维持立地生产力的合适的间作物种类等内容，得到以下结论：(1)随着年龄的增加，三倍体毛白杨地上凋落物的数量从3a的216.03±59.7gm~(-2)增加到7a的482.38±101.3gm~(-2)，通过凋落物归还的N分别为：3a时为18.38±2.46kg.hm~(-2)a~(-1)，5a时为21.63±2.25kg.hm~(-2)a~(-1)，6a时为39.51±4.61kg.hm~(-2)a~(-1)，7a时为38.89±4.89kg.hm~(-2)a~(-1)，归还的P分别为：3a时为5.80±0.62kg.hm~(-2)a~(-1)，5a时为8.16±0.94kg.hm~(-2)a~(-1)，6a时为11.31±1.33kg.hm~(-2)a~(-1)，7a时为11.76±1.37kg.hm~(-2)a~-1随着年龄的增加，通过细根周转归还的养分也在增加，归还的N分别为：3a时3.85±0.41kghm~(-2a~(-1)，5a时5.22±0.63kghm~(-2)a~(-1)，6a时7.62±0.89kghm~(-2)a~(-1)，7a时9.17±1.22kghm~(-2)a~-1归还的P分别为：3a时0.73±0.07kghm~(-2a~(-1)，5a时1.69±0.09kghm~(-2)a~(-1)，6a时1.92±0.31kghm~(-2)a~(-1)，7a时1.96±0.21kghm~(-2)a~-1从地上凋落物、细根周转、湿沉降三种不同途径归还林地养分所占的比例来看，地上凋落物中的落叶是归还养分主要途径，年龄在3a、5a、6a、7a时，通过落叶归还的N所占比例分别为74.84%、71.96%、78.58%和75.03%，归还的P所占比例分别为85.93%、80.31%、83.04%和83.23%。

The results of cold-flow model test indicate:(1) the pressure drop rises with increasing air quantity and solids quantity respectively, however, much more air quantity and solids quantity minish in the same height position;(2) the pressure drop rises with increasing solids quantity;(3) the average granule concentration minishes with increasing air quantity, and rises with increasing the granule quantity in the same level position;(4) the inhomogeneity of distribution granule concentration minishes with increasing air quantity, and rises with increasing the granule quantity in the same level position.

结果表明：(1)在同一高度截面上，循环流化床反应器炉膛内压降随风量的增加而增加，但是风量过于增大反而使压降在同一截面上减小；(2)压降随初始物料量的增加而增加；(3)在同一水平截面上，颗粒浓度随风量的增大而逐渐减小，随物料量的增大而增大；(4)颗粒浓度分布的不均匀性随风量的增大逐渐减小，随物料量的增加不断增大。

Addition of chamfering shape on seating surface of joint bolt at atf cooler pipe area.

倒棱增加物的塑造在自动制冷管的范围内、接头螺栓的座套表面。

The copolymer derived from the copolymerization in high capacity kettle were testified that copolymerization between AN and MMA occurred. The microcapsules in the films are distributed in the copolymer film matrix. The heat-absorbing temperatures and heat-evolving temperatures of the films are almost the same as that of the MOCT, respectively. In addition, the enthalpy efficiency of MOCT, the melting enthalpy and the crystallizing enthalpy rises with the contents of MOCT increasing.The decomposition temperature of copolymers in the films containing various contents of MOCT decreases with the contents of MOCT increasing.

采用30升聚合釜合成了丙烯腈—甲基丙烯酸甲酯共聚物，证实了丙烯腈和甲基丙烯酸甲酯发生了共聚反应；正十八烷微胶囊分散和镶嵌到了共聚物膜基体中；正十八烷微胶囊含量不同的共聚物膜的吸热温度放热温度与纯正十八烷微胶囊的吸放热温度基本相同；随着正十八烷微胶囊含量的增加，共聚物膜的热焓和热效率逐渐增加；共聚物膜中的共聚物的热稳定性温度随着正十八烷微胶囊含量的增加逐渐减小，共聚物膜的结晶度则有所增大。

And also the device was simulating. The results of cold - flow model test indicate that pressure drop rises with increasing air quantity and solids quantity respectively, however, much more air quantity will make pressure drop minish in the same height position;The average concentration of granule minishes with increasing air quantity, and rises with increasing solids quantity in the same height position;The inhomogeneity of distribution of the average granule concentration minishes with increasing air quantity, and rises with increasing the granule quantity.

冷态实验结果表明：流化床内同一高度截面与基准面之间的压差是随风量的增加而增加的，但是风量过于增大反而使同一高度截面与基准面之间的压差减小了，同时，压差是随初始物料量的增加而逐渐增加的；在同一高度截面上，颗粒平均浓度随风量的增大而逐渐减小的，随物料量的逐渐增大而增大的；颗粒浓度分布的不均匀性随风量的增大而逐渐减小，而随物料量的增加而不断增大的。

Also the addition of a small amount of epoxysilane to the silica sols lead to an enhancement of leaching and bleachingfastness.

同样，少量硅熔至硅溶胶的增加物致使了过滤和漂白的不褪色性的增强。

与增加物相关的网络解释 [注：此内容来源于网络，仅供参考]

add zest to sth：增加某物的风味(兴趣)

to add more hot water 多加点热水 | add zest to sth 增加某物的风味(兴趣) | add fuel to the flame 火上浇油

additament：增加物

addison's disease 爱迪生氏病 | additament 增加物 | addition 加

simple choker：简单的窒息之物

Matte Choker 不光滑的窒息之物 | Simple Choker 简单的窒息之物 | Add Grain 增加颗粒

flak jacket：降低敌方爆裂物的伤害

2.Fireworks 增加使用爆裂物的伤害 | 3.Flak Jacket 降低敌方爆裂物的伤害 | 4.Gas Mask 不会受到毒气弹影响

Hardest AC：数值增加(物理性防御力增加)

Hardest AC数值增加(物理性防御力增加) 6 11 17 22 28 G20 | Smart 物理性攻击的回避率增加 3% 7% 13% 21% 25% G10 | Strike 依攻击者伤害力的比例来反击 27 54 81 137 173 G10

inhibitor：抑制物

最后要说明许多的食物成份会相互影响吸收:增强(enhancer)和抑制物(inhibitor). 增加物指的是同时食用可以增加铁质的吸收,例如维生素C;而若是和抑制物同时食用会与铁质互相竞争吸收,例如钙质和许多植物所含植酸(phytate)会与铁质结合,

secretagogue：促分泌物

见于下列情况:1.外源性或内源性促分泌物(secretagogue)刺激肠粘膜电解质分泌增加促分泌物可分为3大类:①细菌肠毒素:如霍乱弧菌、大肠杆菌、沙门菌、金黄色葡萄球菌等细菌外毒素或内毒素,见于急性食物中毒或肠道感染,

Vaginal Discharge：阴道分泌物增加

Cramps 下腹抽痛 | Vaginal discharge 阴道分泌物增加 | Braxton Hicks contraction 俗称"假阵痛"无痛的宫缩

escorts：增加護航

transports - 增加運輸 | escorts - 增加護航 | nolimit - 移動建築物界限

Milk Thistle Extract：艿蓟草粹取物 保护肝脏 有利肝细胞增生

Echinacea root powder 紫锥花粉 增加免疫力 疾病抵抗力 | Milk thistle extract 艿蓟草粹取物 保护肝脏 有利肝细胞增生 | Ginkgo biloba extract 银杏粹取物 改善脑部 心脏及肾脏功能