均度图

词组短语

isometric chart

与均度图相关的网络例句 [注：此内容来源于网络，仅供参考]

Themain contents of this dissertation are as follows:(1) The quality analytiedal results of chitosan are as follows: water for 15.205%;degree of deacetylation 92.671%; the weight average relative molecular weight ofchitosan 195900; the viscosity average relative molecular weight of chitosan 194100;and the decomposing temperature 298℃. The infrared ray IR spectra of chitosanshows that the feature-absorbing band of chitosan amido was 1601cm~(-1), that ofβ-indican bond was 986cm~(-1). The results of the X-ray diffraction of chitosan indicatesthat its degree of deacetylation and degree of crystal are both big.

本文的主要内容如下：(1)对壳聚糖的质量进行分析，其水份为15.205％，脱乙酰度为92.671％，重均分子量为195900，黏均分子量为194100，分解温度为298℃，壳聚糖的红外光谱表明，壳聚糖—NH_2的特征吸收峰为1601cm~(-1)，β-糖苷键的特征吸收峰为986cm~(-1)，壳聚糖的X-衍射图表明壳聚糖原料的脱乙酰度和结晶度均较大。

Based on investigating the short and intermittent structural plane, surrounding rockmass of the huge underground powerhouse in Three Gorge has been divided into five statistical similar areas according to its characteristic of rockmass structure by applying structure plane network simulation. Distributed characteristic of structural plane has been studied and based on it mechanics macrocharacteristic has been studied:(1) It is the first time that based on the result of structural plane network simulation rockmass quality of every structure area has been studied with applying blurred information optimum seeking technique and be compared with and RQD method. The result indicated that it has better effect to evaluate rock quality with blurred information optimum seeking technique.(2) It is the first time that the interrelated relationship of the result of in-suit rockmass deformation test and fractal characteristic of structure on test point has been applied to determine rockmass deformation parameter. The question of evaluating deformation parameters of engineering rockmass has been solved.(3) Anisotropy strength parameters have been determined by applying shear zones simulating method. The result indicated that there are different strength parameters in every structural area, after comparing the result of Fast Lagranian Analysis in continua number simulation method with that of method of weighted mean according to continuity. The result indicated that when a suitable reduction coefficient is been considered rockmass strength parameters can be simply and fast determined with method of weighted mean according to continuity where there is not enough test result.(4) Damage characteristic has been studied based on analysis fractal characteristic of structural plane network by applying fractal-damage coupling method. It is the first time that the concept of damage degree has been set up to evaluate rockmass quality according to the biggest principal damage.

通过对短小、断续性结构面统计特征的研究，将地下厂房区划分为五个岩体结构统计均质区，应用结构面网络模拟技术研究了各个岩体结构均质区结构面的发育分布特征，并以此为基础对岩体宏观力学特性进行了深入研究：(1)首次通过在结构面网络模拟计算结果的基础上，应用模糊信息优化技术研究了厂房区各个岩体结构分区的岩体质量并与岩体基本质量指标研究法、岩体质量指标RQD值研究法作了对比，结果表明以结构面网络模拟结果为基础，应用模糊信息优化技术进行岩体质量评价能够取得很好的效果，解决了工程岩体质量的定量评价问题；(2)首次通过对已有的现场大型岩体变形试验结果的分析及相应试验点岩体结构分形特征的研究，建立了结构面分布的分形维数和岩体变形指标间的相关关系，并首次应用这种相关关系根据结构面网络模拟及分形维数计算结果确定了缺少试验结果的地下厂房各工程部位的岩体变形指标而且应用于围岩稳定性计算，解决了工程岩体宏观变形参数的评价问题；(3)应用在结构面模拟网络图上模拟岩体剪切破坏带的方法，得出了岩体在不同方向上的强度参数，结果表明岩体的强度特性与结构面的发育方向和程度有着明显的关系，各个岩体结构均质区具有不同的强度参数；同时还通过应用拉格朗日差分法对岩体强度指标的数值分析并与按连通率加权平均计算法对比表明，按连通率加权平均计算法在考虑合理的折减系数情况下，可以简单快速地对缺少现场大型试验结果的具体工程部位实现岩体强度指标的估计，通过以上研究解决了工程岩体抗剪强度参数的评价问题；(4)通过结构面网络分形维数的研究，应用分形损伤耦合分析方法，研究了厂房区岩体的损伤特征，并首次引入"损伤度"的概念，建立了应用最大主损伤评价岩体质量的指标体系。

Owing to the complexity of CIMS' missions,the reliability modeling should adapt the production processes accurately.Conventional reliability model method can not reflect the time dynamic behavior of CIMS,so the multitask reliability model based on generalized stochastic Petri nets is established for a CIMS manufacturing shop with multiple missions and the process times of the machines with exponential distributions.Furthermore,analysis of GSPN model based on behavior expression and moment generating function is presented,then can compute the transfer functions.Finally,the multitask reliability can be easily obtained without the reachability graph of Petri nets,which measure can reflect the operating performance of the whole multitask CIMS more intuitively.

CIMS生产的复杂性要求其可靠性模型可以精确地反映生产过程，由于传统的可靠性建模方法无法兼顾CIMS的时间动态特性，所以针对一个复杂的有多个加工任务的CIMS制造单元，由于其机器加工工件的时间均为指数分布，则采用广义随机Petri网进行多任务可靠性建模，在此基础上基于Petri网行为表达式，将矩母函数思想引入其中，不必生成可达标识图就可通过计算模型的传递函数，进而得到整个系统的多任务可靠度，该可靠性指标可以更直观地反映具有多种加工任务的整个CIMS的运行性能。

RESULTS: Compared with control group, SDNN, SDANN, TP, VLF and scattergram length in organic heart disease group were significantlylow. Results of Lorenz plot showed that most of controls were comet shape (82.22%) as well as organic heart disease patients were complex shape (42.22%), triangularshape (35.56%) and torpedo shape (8.89%). L correlated well with SDNN, SDANN, TP and VLF. Scattergram dispersion correlated well with rMSSD, PNN50 and HF.

结果：与对照组比较，器质性心脏病组的SDNN、SDANN、TP、VLF及Lorenz散点图长度均显著下降，对照组散点图82.22%为彗星状，器质性心脏病组复杂形、扇状及鱼雷状分别占42.22%、35.56%及8.89%； L与SDNN、SDANN、TP、VLF呈显著的正相关，散点图离散度与rMSSD、PNN50、HF呈显著的正相关。

In this study, EPMA and LA-ICP-MS were used to determine the major and trace element concentrations, respectively, of apatites from Transhimalayan granitoids. The results indicate that F, Mn, Sr and REEs in apatites generally show good correlations with compositions of their host magmas and thus have high potential to be utilized as petrogenetic tracers. More specifically, F and Mn contents in apatites are covariant with the aluminosity of the host rocks so that can be used as an indicator for magma differentiation. Combining with Sr and REE data, which show significant variations in apatites from different rock types, these elements may be furthermore used to construct "discrimination diagrams" for more detailed investigations of complex petrogenetic processes such as magma mixing and compositional heterogeneity.

本研究中，电子微探以及雷射烧蚀感应耦合电浆质谱术分别被用以量测藏南火成岩中磷灰石的主量与微量元素含量，微区分析的结果显示，磷灰石的氟、锰、锶以及稀土元素均与岩浆源成分展现良好的对比关系，揭示了它们应用在岩石成因示踪上的优秀潜力：其中，磷灰石氟、锰含量的变化与原岩的铝饱和情形息息相关，因此可以作为岩浆分异程度的指标；而锶以及稀土元素则在不同岩石类型来源的磷灰石中展现了明显的丰度变化，因此综合这些元素将有机会进一步建立岩浆来源的「鉴别图」，甚而以此讨论岩石成因，例如：岩浆混合与源区组成的不均一性。

Hyperbranched aliphatic polyethers with narrow molecular weight distribution have been prepared via anionic polymerization of glycidol with rapid cation-exchange equilibrium.

根据~(13)C-NMR谱图的积分结果，计算得到HPG的支化度为0.54，GPC测得的数均分子量为3265，分散度为1.48。

All the three ternary compounds formed in the title systems are new compounds reported for the first time in this paper. They are incongruently soluble in water.

从溶度图上发现了三个未见文献报道的三元化合物，它们均为固液异组成溶解的化合物。

Subjects with Benign Rolandic Epilepsy of Childhood are recruited for study. This is because BREC usually exhibits normal neuroimaging finding but has a stereotypic EEG features. In this study, the singular value decomposition technique is utilized to decompose the selected spike interval of BREC into spatial and temporal components.

本研究对良性中央颞叶局部癫痫症状的儿童做实验，此病症之棘波有著良好的稳定性及典型的脑波图特徵，而且做神经影像检查时，一般均为正常，因此必须藉由脑波图时空特性分析，才能定出此一异常波之三度空间位置与其随时间变化的情形。

As showed in Fig.1, the diagrammed stress of short time endurance test forAs showed in Fig.1, the diagrammed stress of short time endurance test for500 hours at 565℃on welded-joint of T91-F12 is 240MPa. Considering the℃on welded-joint of T91-F12 is 240MPa. Considering thedispersity of±20％, stress of check test for 500 hours is 192MPa. The result±20％, stress of check test for 500 hours is 192MPa. The resultof short time endurance test for 500 hours at 565of short time endurance test for 500 hours at 565℃on T91-X20CrMoV121℃on T91-X20CrMoV121welded-joints is showed in Tab.5. The result shows that the short timewelded-joints is showed in Tab.5. The result shows that the short timeendurance stress of weldedendurance stress of welded-joints with two procedures at 565℃for 500 hours-joints with two procedures at 565℃for 500 hoursboth above 192MPa, and meet the requirement.both above 192MPa, and meet the requirement.

依据图1，对T91－F12 焊接接头 565℃温度下的短时持久性能 500 小时考核试验依据图1，对T91－F12 焊接接头 565℃温度下的短时持久性能 500 小时考核试验的图示应力值应为 240MPa，按照持久强度试验数据的±20％的分散度，取 500的图示应力值应为 240MPa，按照持久强度试验数据的±20％的分散度，取 500小时考核试验应力值为 192MPa.T91－X20CrMoV121 焊接接头 565℃、500 小时小时考核试验应力值为 192MPa.T91－X20CrMoV121 焊接接头 565℃、500 小时短时持久考核试验试验结果见表5 ，试验结果表明，两种工艺条件下的焊接接头短时持久考核试验试验结果见表5 ，试验结果表明，两种工艺条件下的焊接接头565℃温度下的短时持久性能，500 小时的持久断裂应力均高于 192MPa，结果符565℃温度下的短时持久性能，500 小时的持久断裂应力均高于 192MPa，结果符合要求。

The reservoir rock types in the region of interest are grain limestone, algal limestone, cryptite, siltstone, muddy limestone and mudstone. The thesis identified as a result of changes in the deposition causing the heterogeneity in plane, and then the geological oil reserves have been calculated in accordance with the areal heterogeneity.3、Based on the data of core analysis, bore logging, array induction imaging log and FMI, porosity and permeability model were built using regression analysis. Through testing 45 rock samples, a, b, m, n value were obtained and used to calculate single-layer oil saturation value using the Archie formula. According to the theory of laterolog and inductolog, resistivity ratio and cross plot were used to identification effective thickness. Effective thickness was identified delicately in 103 wells. Based on the over work, active porosity and oil saturation was calculated accurately.4、According to observation of 100 pieces of the thin slices, cast thin slices and 383m core in three wells, the chief diagenesis in this area were compaction, cementation, denudation and cataclasis. Cementation and denudation were universally influenced active porosity this area. The intergranular pores, residual pores and secondary pores were formed in thin carbonated reservoir of lacustrine facies.5、The influence of reservoir heterogeneity to reservoir calculation was analyzed systematically using actual data. And the conclusions were as follows:①The principal reason leading to oil distribution unequal is interior structural feature of reservoir in structural hydrocarbon reservoir.

确定了由于沉积微相的变化而导致的平面非均质性，进而在平面上按照平面非均质单元计算了石油地质储量。3、利用岩心分析、常规测井曲线与阵列感应、成像测井资料相结合，分岩性利用回归分析方法建立了储层孔隙度、渗透率模型；通过对45块岩样进行岩电试验，获取了a、b、m、n值，利用阿尔奇公式计算了各单层含油饱和度值；根据侧向电阻率和感应电阻率串并联特性，利用电阻率比值法与常规交会图法相结合重建了有效厚度图版，对全区103口井目的层段进行了有效厚度精细划分，通过以上工作，准确求取了储量计算单元内有效厚度参数、有效孔隙度参数以及含油饱和度参数。4、通过对研究区3口井383m岩心观察，100余块薄片、铸体薄片镜下鉴定得出：油泉子油田上、下油砂山组储层主要成岩作用是压实作用、胶结作用、溶蚀作用和破裂作用，其中溶蚀作用、胶结作用最普遍，这两种作用对有效孔隙度影响最大，以上成岩作用形成了原生粒间孔、粒间残余孔和次生孔隙(如粒间溶孔、粒内溶孔、铸模孔、晶间孔等)为主的薄层湖相碳酸盐岩储层。5、利用实际资料，系统分析了油藏非均质对储量计算的影响，认为：①对于构造油气藏而言，油气藏构造及断裂特征是造成油气分布不均的首要原因，储集条件相同的条件下，构造高部位有利于储存油气，油气在垂向的重力分异体现了油气藏内部构造的不均一特征。

与均度图相关的网络解释 [注：此内容来源于网络，仅供参考]

amp：振幅

结果 声带的振动模式随声带息肉的基底、形态、体积及单双侧的不同而变化,同时其振动参数及电声门图出现相应的变化:所有声带息肉均不同程度地影响声带振动规则性(REG)、振幅(AMP)、声门闭合度(GLO)及粘膜波动度(MUC),

isometric chart：均度[等距]图

particular of cargo 货物明细单 | isometric chart 均度[等距]图 | petiolar 叶柄的, 生在叶柄上的

std：标准差

经过对试验数据的多次仿真试验,我们提取到其故障特征信号为峰值(MAX)、峭度(KUR)、标 准差(STD)这三个量作为网络的输入. 网络采用离线训练、在线使用的方式. 神经网络的结构如图3所示,其中隐含层神经元个数、各个神经元上的权值和阈值均由大量试验样本数据训练得到.

petiolar：叶柄的, 生在叶柄上的

isometric chart 均度[等距]图 | petiolar 叶柄的, 生在叶柄上的 | parliamentary debates 议会辩论记录文件