剪

基本解释 (translations)

lop  ·  scissor  ·  secateur  ·  shear  ·  snip  ·  lopped  ·  lops  ·  scissored  ·  snipped

与剪相关的网络例句 [注：此内容来源于网络，仅供参考]

The main factors affecting the soil-structure interface behaviors were found experimentally and theoretically, including: 1 the thickness of the interface that is five to six times the average grain size of the soil; 2 the aeolotropy of interface, which is responsible for anisotropic response of the stress-strain response of the interface; 3 two physical states, including crashing and compression of the soil near the structure surface, which govern the stress-strain response of the interface strongly; 4 two shear deformation components due to sliding and constraint of the structure surface relative to the soil respectively, which forms the deformation of the interface; 5 the volumetric strain due to dilatancy, which is found to be composed of a reversible dilatancy component and an irreversible dilatancy component. 4. A unified constitutive model of the interface, based on new elasto-plasticity damage theory, was developed. It was confirmed to be effective for the conditions considering monotonic and cyclic shearing, coupling effect of shear and volumetric strains, evolution of physical state, micro-structure aeolotropy of the soil and the resulting aeolotropy of the interface as well as the three normal boundary conditions stated above. 5. 2D and 3D finite element formulations of the present model were derived and incorporated into the FEM codes. They were applied to the evaluation of practical engineering problems with different typical interfaces between soil and structure. The new model was shown to be reasonable and effective.

确定了粗粒土与结构接触面厚度约为5～6倍的平均粒径，首次揭示了接触面的细观结构异向性以及由此所引起的宏观剪切异向性，发现了在单调和往返剪切荷载作用下土颗粒破碎和剪切压密两种物态变化机制共同支配着接触面力学性质的变化，通过细观分析证实了接触面的变形可分解为一般同时发生的土与结构交界面上的滑移变形以及结构面位移约束范围之内土体本身的剪切变形两部分，观测到接触面受剪时表现出明显的相对法向位移，并可分解为可逆性和不可逆性两个分量；(4)建立了第一个能够统一地描述单调与往返剪切特性、剪应变与体应变耦合特性、细观结构和宏观剪切异向性以及土颗粒破碎等物态变化特性的土与结构接触面弹塑性损伤本构数学模型，并采用多种法向边界条件复杂加载路径的试验成果验证了新模型的合理性和有效性；(5)提出了新模型的二、三维有限元格式并结合实际边值问题进行了应用计算分析，比较了不同接触面本构模型对计算结果的影响，证实了新模型及其有限元格式不仅能够合理地描述土与结构接触面的主要力学特性，还能够较好地反映土体与结构物在接触面处的滑移、脱开等不连续现象。

Certain species or strains have evolved such tolerance, and some, for example certain strains of bent grass (毛状剪股颖 Agrostis capillaris), benefit from the reduced competition in soil containing heavy metal ions.

有时某些种类或品系对重金属浓聚物得耐受性还能发展进化，例如某些剪股颖(毛状剪股颖 Agrostis capillaris)生长在含有重金属离子的土壤中，以此来降低竞争压力。

Five main phenomena were found, firstly, the high plasticity clay could well suitable to large deformation, and had strain-hardening behavior obviously, as well as, the little dilatancy; secondly, there was no correlation between stress paths and shear strength but the stress-strain relations were influenced by stress paths; thirdly, the little stress increment ratio, the higher increase speeding of shear stress and breaking strength under the condition of same initial normal stress; the fourth, the relations between normal strain and normal stress in simple shear test was consistent with which in the single-direction compression test, if there was no dilatancy; the last, the curve of relation between stress ratio and shear strain could be well simulated by hyperbola.

试验结果表明，高塑性粘土能够较好地适应大变形，接触面剪应力与切向应变关系呈剪切硬化型曲线，法向剪胀不明显；接触面剪切强度与应力路径无关，应力应变关系与应力路径密切相关；初始法向应力一定，应力增量比越小，剪应力增长越快，对应的破坏剪应力也越高；无剪胀发生情况下，法向应变与法向应力关系曲线与单向压缩试验具有一致性；应力比与切向应变呈良好的双曲线关系。

Safety Shear Pin Assembly 安全剪切销大会 The safety shear pins consist of two Grade 2 (40 ksi shear strength) 3/16 inch diameter machine screws which connect at a threaded aluminum coupler.

安全剪切销连续两个二级（ 40 ksi 抗剪强度） 3 / 16 英寸直径机螺钉连接在一个线程铝耦合。

N 1 cut made by snipping 剪口: There's a snip in this cloth.

这块布有一个剪口。

Blanch Coke Law: Flower is the woody branches will end on the candle flame, burning 2-3 minutes later, charred squid剪去point Add alcohol immersed one minute, out on the water after rinsing in clean inserted after bottle, flowers in hand to avoid the translocation organizations plug, prevent shear branches I was bacterial infection, has been continuously making flower water supply, extended preservation.

灼焦法：是将木本花卉的枝条末端放在蜡烛的火焰上烧2-3分钟后将烧焦的花枝剪去一点放入酒精中浸泡1分钟，取出后放在清水中漂洗干净后插入瓶中，这样既可避免花枝的输导组织堵塞，又可防止枝条剪口被细菌感染，使花朵不断得到水分供应，延长保鲜。

This paper deals with and summarizes the research and importance of ductile shear zones and presents the future direction and aim for the research of the ductile shear zones around the world. Four aspects of studies of the ductile shear zones have been proposed in this paper as follows:(1) The stress environment including the mineral assemblages, deformation, stress-shearing parameters;(2) The major element sequence and activation under condition of stress;(3) The variations of trace elements and REE, their transportation distributions under strong natural deformation as well as variations of mineral crystal parameters, which can also control the element changes during the ductile deformation;(4) The relationship between element migrations, activation and stress, which will present the new evidences for the studies of dynamic diagenesis and mineralization as well as the studies of evolution of ductile shear zones developed in middle and low levels.(5) The analysis of elements and isotopes in mylonites on the micro-scale are crucial for the understanding of component migrations during the mylonization.

对韧性剪切带及其变形岩石的研究现状和研究意义进行系统的综述，提出了未来韧性剪切带及其糜棱岩的研究方向和目标：①系统研究糜棱岩中主要造岩矿物组合及其变形特征，计算剪切变形岩石的应力－应变参数，搞清韧性剪切带所处的应力应变环境；②系统研究韧性剪切带岩石在天然分强剪切应力作用条件下常量元素迁移机制及活化转移的应力排序问题；③系统研究剪切变形作用过程中岩石化学组成的微量和稀土元素变化，讨论强变形条件下岩石中微量元素活化和迁移规律，深入探讨微量元素迁移的动力控制，包括稀土元素配分变化的应力制约以及应变矿物晶格化学变化行为及其对其寄主的变形岩石元素在应变过程中迁移变化的制约和影响；④从理论上探讨天然强剪切应变条件下岩石中组分活化、转移与应力的因果联系，为深入探讨韧性剪切带动力成岩作用提供理论的科学依据，为探讨中、下地壳中韧性剪切带的形成和演化提供科学依据，同时为韧性剪切变形作用条件下成岩、成矿地球化学作用提供理论和实验依据；⑤现代分析技术如激光同位素原位分析以及激光ICP-MASS分析技术对研究变形域内的岩石的元素和同位素的活化迁移规律，对深刻揭示糜棱岩化过程中的元素活化迁移机制提供更高质量的地球化学证据具有重要的作用。

Changing formula forms of single-shear, twin-shear and three-shear yield strength criteria, show that many of yield strength criteria of rock and soil materials can be expressed by the τ8 = gf function forms unter the ordinary condition, and that the main differ ences of yield strength value will mainly forcus on the different function forms of gθσ among single-shear, twin-shear and three-shear yield strength criteria.

对岩土体常用的单剪屈服强度准则、双剪屈服强度准则和三剪屈服强度准则进行了系统的论述，通过对单剪、双剪和三剪屈服强度准则进行转化，指出岩土的屈服强度准则一般可表达为τ8=gf的函数形式，阐明了单剪、双剪和三剪屈服强度准则的差异主要表现在g函数的不同，并进一步解释了中间主应力σ2对岩土类材料屈服强度的影响。

To reveal the complicated stress state of masonry structure in project and the effect of normal stress on shearing behavior,failure form and shearing strength,the shearing strength was obtained through experiments on 54 pieces of minitype sand-lime autoclaved aerated concrete masonry subjected to different normal stress.

为了解砌体结构在实际工程中所处的剪压复合的复杂受力状态，作用在砌体上的正应力对砌体的抗剪性能、砌体的剪切破坏形态及其对砌体抗剪强度的影响，对54个小型灰砂蒸压加气混凝土砌体进行静力抗剪试验，通过施加不同的正应力得到相应的抗剪强度；分析其破坏机理，归纳得出剪摩、剪压、斜压等破坏形态，并与砖砌体的破坏形态进行比较；根据试验结果回归分析得到灰砂蒸压加气混凝土砌体的静力剪压相关性曲线，与砖砌体的剪压相关性曲线进行对比分析，得到两者的异同；在静力剪压相关性曲线的基础上，依据变摩擦系数的剪摩理论，提出灰砂蒸压加气混凝土砌体静力抗剪强度的建议公式，并对摩擦系数进行了简化

At the same time should do the following:(1) education of children washing hands frequently, wash hands properly;(2) ground剪指甲regular cleaning of toys and other children may have been talking about decentralization of the items;(3) near the road to keep the bedroom with wet erase parts of the children could be reached by the dust;(4) education of children and lead less than a road near the factory and play operation;(5) not in streets with heavy traffic, pushing baby carriages stroll;(6) workplace have lead contamination personnel (such as the smelter workers, traffic police, etc.) Do not wear work clothes to go home;(7) with coal as fuel bedroom window to ground ventilation;(8) high lead level for children to eat less food (such as eggs, burglary rice flower);(9) morning, open the tap water released in the first paragraph should not be used to cook food for the children;(10) to strengthen child nutrition, and ensure adequate calcium, iron and zinc intake.

同时应做到下列几点：(1)教育儿童勤洗手，正确洗手；(2)勤剪指甲，经常清洗玩具和其它可能被宝宝放到口边的物品；(3)近马路的居室要经常用湿布擦除孩子能触及部位的灰尘；(4)教育儿童不到马路边和铅作业工厂附近玩耍；(5)不在交通繁忙的街道推着婴儿车散步；(6)工作场所有铅污染的人员(如冶炼厂职工、交通警等)不要将工作服穿回家；(7)以煤为燃料的居室要勤开窗通风；(8)儿童少吃含铅量高的食品；(9)早晨打开自来水龙头放出来的第一段水不能用来为孩子烹食；(10)加强儿童营养，保证有充足的钙、铁及锌的摄人。

与剪相关的网络解释 [注：此内容来源于网络，仅供参考]

Trim Controls：剪切控制;剪切控制器

Trim剪切 | Trim Controls剪切控制;剪切控制器 | Trim Curve剪切曲线

dilatancy：剪胀性

确地模拟土的剪胀性(dilatancy).经典的应力剪胀性(stress dilatancy)理论无法做到这一点.与状态相关的剪胀性(state-dependent dilatancy)理论认为剪胀性必须既与材料的应力状态而且还与材料的内部状态有关.利用与状态相关的剪胀性理论和临界状态理论能够做到只用一套材料参数即可在相当大的材料和应力状态范围内,

ITar：剪(羊毛)--剪羊毛时不剪耳朵(ear)

ITer 完全的,纯粹的 | ITar 剪(羊毛)--剪羊毛时不剪耳朵(ear) | ITars 大剪刀--两片剪子是剪刀

ITar：剪(羊毛) ear耳朵,剪羊毛的时间不剪耳朵

"ITer " 完全的,纯粹的 | "ITar " 剪(羊毛) ear耳朵,剪羊毛的时间不剪耳朵 | "ITars " 大剪刀

shear modulus：切变模量,剪模量,剪切模量

shear force 切力,剪力 | shear modulus 切變模量,剪模量,剪切模量 | shear strength 切變強度,剪切強度

scissors：手术剪

手术剪(scissors)分为组织剪和线剪两大类(图3-6). 组织剪刀薄、锐利,有直弯两型,大小长短不一,主要用于分离、解剖和剪开组织,通常浅部手术操作用直组织剪,深部手术操作一般使用中号或长号弯组织剪. 线剪多为直剪,又分剪线剪和拆线剪,

undrained shear strength：抗剪强度不排水抗剪强度

抗剪强度安息角(台)angle of repose | 抗剪强度不排水抗剪强度undrained shear strength | 抗剪强度残余内摩擦角residual angle of internal friction

shear strength parameter：抗剪强度抗剪强度参数

抗剪强度抗剪强度shear strength | 抗剪强度抗剪强度参数shear strength parameter | 抗剪强度抗剪强度有效应力法effective stress approach of shear strength

sheared edge：剪断毛边,剪切边,剪切端面,剪切口

sheared circle diameter covering a tube bundle 管束包切圆直径 | sheared edge 剪断毛边,剪切边,剪切端面,剪切口 | sheared hedge 剪篱

shear strain rate：抗剪强度剪切应变速率

抗剪强度伏斯列夫参数Hvorslev parameter | 抗剪强度剪切应变速率shear strain rate | 抗剪强度抗剪强度shear strength