- 更多网络例句与写入相关的网络例句 [注：此内容来源于网络，仅供参考]
-
In this system, the gratings are inscribed by the UV interference fringes of 248 nm derived from a rotatable biprism, where the phase mask is used as a beam splitter, and the biprism is rotated to change the intersection angle of two beams.
在该系统中，光纤光栅是由来自可旋转双棱镜所形成的波长为248 nm的紫外干涉条纹写入的，其中，相位掩模被用作1级衍射光的分束器，通过双棱镜的旋转可改变两写入光束的交叉角。
-
Direct Correspondence of Display Data RAM to LCD Pixel Display Data RAM2,500 bits LCD Drivers25-common and 100-segment Selectable Duty and Bias Ratio ; 1/25 Duty 1/6 Bias or 1/15 Duty 1/5 Bias Direct connection to 8-bit Microprocessor interface for both of 68 and 80 type MPU Serial Interface (SI, SCL, A0, CS) Useful instruction set Display ON/OFF, Display Start Line Set, Page Address Set, Column Address Set, Status Read, Write Display Data, Read Display Data, Normal or Inverse ON/OFF Set, Static Drive ON/Normal Display, EVR Register Set, Read Modify Write, End, Reset, Internal Power Supply ON/OFF, Driver Output ON/OFF, Power Save and ADC select.
直接显示数据RAM的对应像素液晶显示数据RAM2，500位液晶Drivers25，共同和100段可选择的职务和偏差率； 1 / 25的责任1 / 6的偏见或1 / 15的责任1 / 5偏见的直接连接至8位微处理器的接口为68和80型微控制器的串行接口（司，沙田至中环线时，A0，CS）的相关指令集显示开/关，显示开始行设置，页面地址设置，列地址设置，状态读取，写入显示数据，读取数据显示，正常或逆开/关设置，静态驱动器/正常显示，腔内注册设置，读取修改写入，完，复位，内部电源开/关，开/关，节能和ADC选择驱动器输出。
-
The invention provides a method for achieving priority level for generating sequence of mapping items which are transformed by network address, the method comprises the following method, first, when an address conversion apparatus needs to converse address after the address conversion apparatus receives a data packet, judging whether the items are generated, upwards sending the data packet to a CPU when a mapping item is not generated, step B, judging whether concurrent mapping number exceeds the preset mapping enqueue threshold with the CPU, if exceeds the preset mapping enqueue threshold, and judging whether a Referer field is contained in HTTP data, and recording the Referer field or a GET field according to judgment result, writing in a REF table, and arraying a priority level for each user according to a write sequence, and step C, leading the CPU to generate map in turn according to the priority level in the REF table, and then sending down to a forwarding layer to transfer a data packet.
本发明提供一种对网络地址转换的映射条目生成顺序实现优先级的方法，包括下列步骤：步骤A：当地址转换设备收到数据包后，需要进行地址转换时，判断映射条目是否已经生成，在未生成映射条目时，将数据包上送至CPU；步骤B：CPU判断并发映射数是否超过预定的映射入队门限，如果是，则判断在HTTP数据中是否含有Referer字段，并根据判断结果记录Referer字段或者GET字段，写入REF表中，并将每个用户依照写入顺序排列出优先级；步骤C：CPU依照REF表中的优先级依次生成映射，然后下发到转发层面转发数据包。
-
The method includes establishing one reverse mapping list comprising list items; reading the mapping data recorded in the data block state list item area to the list items during system initialization; checking reverse mapping list and finding the data block in Flash memory during reading some logic block; and writing the updated data into the empty data area of one new data block, writing the mapping data between the new logic block and the new data block into the state list item area and updating the mapping data of the corresponding list item in the reverse mapping list during writing some logic blcok.
包括：建立一个由表项组成的反向映射表，一个表项对应一个逻辑块；在系统初始化过程中，将数据块状态表项区中记录的映射信息，按逻辑块号与表项间的对应关系读取到各表项中；读取某逻辑块时，以其逻辑块号作为表项索引查找反向映射表，定位到表项，根据表项中记录的映射信息，在Flash存储器件中查找到数据块；写入某逻辑块时，将更新数据写入一新数据块的空白数据区中和将该逻辑块与新数据块间的映射信息写入状态表项区中，同时更新反向映射表相应表项的映射信息。
-
Based on the results, suggestions are provided to assist engineers in this field to select best parameters for saving test time of flash memories.
就NOR型的快闪记忆体测试来说，本研究发现，在相同测试条件下，随著IC电源电压升高可以减少测试时间，因为电压越高则写入与擦拭的动作会越快完成，且测试项目中最为费时的就是写入时间；提高测试频率也可以减少测试时间，因为较高的频率加快测试指令下达的速度与资料传输的时间，对於减少读取与写入的时间有极大的帮助。
-
When the floppy disc drive is not writing data to or reading data from the disc, data read from the disc is supplied sector by sector from the buffer memory to the system bus or data to be written to the disc is supplied sector by sector to the buffer memory from the system bus.
当软盘驱动器不是正在将数据写入盘或从盘读取数据时，从盘读取的数据逐个扇区地从缓冲存储器传输到系统总线或待写入盘的数据逐个扇区地从系统总线传输到缓冲存储器。
-
This invention discloses one data regroup method, which is based on the original independent and redundant RAID system high address to preserve one block disk space as regroup area and to repeat the following steps: a, determining the current regroup data low address and to regroup the data from high address to low address into new RAIN type of data; writing the regroup data from initial address into the new RAID type data; using the current regroup data of low address as the next regroup data high address as the next second initial address of the data.
本发明公开了一种数据重组方法，在原独立冗余磁盘阵列系统高地址侧尾部预留一块磁盘空间作为重组区域，将该预留重组区域的高地址作为写入数据的起始地址，并将原RAID系统中存有数据的高地址作为重组数据的起始高地址；数据重组完之前重复执行以下步骤：确定当前要重组数据的低地址，并将当前要重组数据高地址到低地址之间的数据重组为新RAID类型数据；将重组后的数据从写入数据的起始地址向低地址方向，顺序写入新RAID系统中；当前要重组数据低地址的邻接低地址作为下次要重组数据的高地址，当前写入数据低地址的邻接低地址作为下次写入数据的起始地址。
-
The supply of this writer is controlled by program.It is safe and convenient. It can be used to check, write and read a EPROM, verify and save program to tape and load program from tape to EPROM. It also can be used to copy EPROM.
该写读器由程序上下电，使用安全、方便；可进行EPROM芯片擦除检查、写入、读出，将写入的程序和原程序校验；将程序记入磁带和从磁带上读入程序并写入到EPROM芯片中去，复制EPROM等许多强有力的功能。
-
C Supports both Firmware Hub and LPC Memory Read and Write Cycles Auto-detection of FWH and LPC Memory Cycles C Can Be Used as FWH for Intel 8xx, E7xxx, and E8xxx Series Chipsets C Can Be Used as LPC Flash for Non-Intel Chipsets Flexible, Optimized Sectoring for BIOS Applications C 16-Kbyte Top Boot Sector, Two 8-Kbyte Sectors, One 32-Kbyte Sector, Three 64-Kbyte Sectors C Or Memory Array Can Be Divided Into Four Uniform 64-Kbyte Sectors for Erasing Two Configurable Interfaces C FWH/LPC Interface for In-System Operation C Address/Address Multiplexed Interface for Programming during Manufacturing FWH/LPC Interface C Operates with the 33 MHz PCI Bus Clock C 5-signal Communication Interface Supporting Byte Reads and Writes C Two Hardware Write Protect Pins: TBL for Top Boot Sector and WP for All Other Sectors C Five General-purpose Input Pins for System Design Flexibility C Identification Pins for Multiple Device Selection C Sector Locking Registers for Individual Sector Read and Write Protection A/A Mux Interface C 11-pin Multiplexed Address and 8-pin Data Interface C Facilitates Fast In-System or Out-of-System Programming Single Voltage Operation C 3.0V to 3.6V Supply Voltage for Read and Write Operations Industry-Standard Package Options C 32-lead PLCC C 40-lead TSOP
0第0页，本页显示记录0-0，共0条记录分0页显示C支持两种固件中心和LPC内存读取和写入周期自动的FWH和LPC的记忆圈C检测可以用于英特尔8xx系列，E7xxx，E8xxx系列芯片组和C可以用作FWH与至于非英特尔芯片组的BIOS应用柔性优化扇区开放16字节热门引导扇区，两个8 - Kbyte的，一个32字节部门，3个64 - Kbyte的C或存储阵列，线性预测编码闪光可分为四个统一为两个可配置的接口擦除的FWH / LPC接口为64 - Kbyte的行业，系统运行C地址/地址多路复用在制造过程中用于编程接口的FWH /线性预测编码界面C与33 MHz的PCI总线时钟 5信号通信接口进行操作，支持字节读取和写入引导扇区的顶部和WP C两硬件写保护引脚：任务型为所有其他部门 5个通用输入的系统设计的灵活性识别的多种设备选型部门登记销锁定为个别部门读取和写保护的A /阿复用界面C 11引脚复用引脚地址和8引脚的数据界面C促进快速系统内或外的系统编程的单电压3.0V至3.6V的操作供应的读取和写入操作业界标准的封装选项电压 32 -引脚PLCC 40引脚的TSOP
-
On CHE programming, the higher coupling ratio of control-gate makes the higher electrical field across TOX in Si than Ge. Also because of the continuity of displacement vector, the higher permittivity of Ge would cause the lower electrical field at interface. We get the higher gate current in Si than Ge. On CFN programming, the higher CT in Ge would show the higher electrical field across TOX. However, the parameters of F-N tunneling are calculated and showing the gate current in Si is larger than Ge. On the same mechanism of F-N tunneling erasing, the parameters also show the higher electrical filed of Si would cause the higher erasing speed. The continuity of displacement vector also explains the higher electrical field at interface for F-N tunneling programming/erasing.
从通道热电子穿隧写入的模拟结果发现，由於控制闸极耦合电容的影响，加上电位移向量在半导体-氧化层界面连续的观念，拥有较高介电常数的锗反而得到较小的等效电场，决定了穿隧电流反倒是不如矽基板；在F-N穿隧写入的模拟中，即便锗基板拥有较大的总耦合电容，使得在浮闸的耦合电压大於矽基板，但仍旧是半导体-氧化层界面的电场扮演了穿隧电流的决定性因素，得到的结果仍旧是矽基板的写入速度高於锗基板；在F-N抹除的模拟中，运用与F-N写入相同的数学模型，仍旧看见在锗基板上未能得到速度上的改善，同时用数学的计算展示了合理的解释。
- 更多网络解释与写入相关的网络解释 [注：此内容来源于网络，仅供参考]
-
CD-WO CompactDiscWriteOnce：一次写入性光盘
CDW CommunicationDescriptionWord 通信描述字 | CD-WO CompactDiscWriteOnce 一次写入性光盘 | CD-WOEA CompactDiscWriteOnceExtendArea 一次写入性光盘的扩充区
-
CD-WO Compact Disc Write Once：一次写入光盘
CD-V Compact Disc-Video 视频光盘 | CD-WO Compact Disc Write Once 一次写入光盘 | CD-WOEA Compact Disc Write Once Extend Area 一次写入光盘扩充区
-
CD-WOEA Compact Disc Write Once Extend Area：一次写入光盘扩充区
CD-WO Compact Disc Write Once 一次写入光盘 | CD-WOEA Compact Disc Write Once Extend Area 一次写入光盘扩充区 | CD-WORM Compact Disc-Write Once Read Many 一次写入多次读出光盘
-
write invalidate：写入无效
"写入唯读记忆体","write into read only memory" | "写入无效","write invalidate" | "写入项目作业","write item operation"
-
Paging rate：每秒钟读入物理内存或写入页面文件的页数
Page-out rate 每秒钟写入页面文件和从物理内存中删除的页数 | Paging rate 每秒钟读入物理内存或写入页面文件的页数 | Swap-in rate 正在交换的进程数
-
readin：写入
readinn.写入 | readin写入 | readonlymemory只读存储器
-
WEF WriteEndofFile：写入文件结束符
WDT WriteDataStrobe 写数据选通 | WEF WriteEndofFile 写入文件结束符 | WFA WriteForward 正向写入
-
WR：写入
输出端分别连接至闪存的写入使能(WE)接脚、输 出使能(OE)接脚、静态随机存取存储器的写入使能(WE)接脚及输出使能(OE)接 脚;藉此,通过该微控制器的一输出入端口的一接脚的输出电位与逻辑电路来 改变原程序储存使能(PSEN)接脚、写入(WR)接脚及读取(RD)接脚功能,
-
write head：写入磁头
wrist-action shaker 手动摇筛机 | write head 写入磁头 | write magnetic tape 写入磁带
-
write-in：写入
write enable 写入起动 | write in 写入 | write in 写入写数存入