- 更多网络例句与下筒相关的网络例句 [注：此内容来源于网络，仅供参考]
-
One is the rotation of the cylinder and the other is swinging of the cylinder along the swinging rack, materials to be mixed will rotate when the cylinder is rotating, and will be mixed from left to right when the cylinder is swinging.
被混和物料在转筒内随转筒转动、翻转、混和的同时，又随转筒的摆动而发生左右来回的掺混运动，在这两个运动的共同作用下，物料在短时间内得到充分的混和。
-
In order to obtain actual preferred principle of processing parameter about three-roller backward spinning of tube,nonlinear FEA software ANSYS/LS-DYNA is,carried on 3D dynamic simulation,stress analysis and strain analysis to three-roller backward spinning of tube under different processing parameter.
为了确定更为符合实际的筒形件三旋轮强力反旋工艺参数的选用原则，利用大型非线性有限元软件ANSYS/LS-DYNA对不同工艺参数下筒形件三旋轮强力反旋旋压过程进行了动态模拟和应力应变分析。
-
With the continuous method, the displacement shape functions are constructed with the self-contained trigonometric function series, and then the formulae of normal stress and shear stress in the shear walls of the core tube subjected to a torque are brought forward.
根据结构连续化分析方法，采用完备的三角函数系形式表示正六边形核筒悬挂建筑结构中筒体在扭矩作用下的位移函数，并推导出核筒中的剪力墙的正应力和剪应力公式。
-
According to analysis of flow field and velocity distribution in the mix tank,the results indicate that:using draft-tube in the mix tank,the axial flowing of liquid can be increased,the circumgyration around the impeller will be improved,and the strong mixed effect can be gained.
通过对有、无导流筒的搅拌槽内流场和速度的对比分析表明：导流筒强化了搅拌槽内上下液体的整体轴向流动，在近浆区域改善了液体的跟转，有强烈的混合效果，并且，在较为理想的流场分布下，有导流筒的搅拌槽功率消耗比无导流筒搅拌槽节省12%，其结果将为搅拌槽的整体结构优化提供有效途径。
-
For naturally cooled monobloc barrel, its thermal condition in regular regime can be evaluated by measuring the outside temperature of two arbitrary rounds;(2) During a sustained firing process, unsteady heat conduction exists in a monobloc barrel, whereas unsteady and quasi steady heat conduction exist with actively cooled composite barrels, meaning that the thermal condition changes from uncontrolled to controlled;(3) Different combinations of the convective heat transfer coefficient h and thickness of gun barrel δ have much effects on cooling the bore temperature.
利用有限元软件分析了某大口径火炮身管的温度场分布，并对自然散热条件下的单筒身管和主动冷却条件下的复合身管温度场进行了比较，其结果为(1)身管温度场分布存在初始和正规工况阶段，后者的单筒身管热状态可以通过测定任意两发身管外表面温度来评估；(2)持续射击过程中，单筒身管始终处于非稳态导热过程，主动冷却身管则包括非稳态和准稳态两个过程，实现了身管热状态由不可控向可控转变；(3)对流传热系数h和身管壁厚δ的组合对降低内膛温度具有很大影响。
-
At the wind tunner blocking joint, set ramrod rib reinforcement as well as strengthening liner iron from above to the bottom; fix a bracing sheet on the top; joint between wind tunner blocking adopts flanging butt joint, no lacing wire on the wind tunner top, fabricate strictly according to GB7190.2 - 97 standard.
风筒分块连接处，设置从上至下通条加强筋以及加强衬铁；上部作一圈加强板；风筒分块间联接采用翻边对接，风筒上部不设拉筋，严格按照GB7190.2-97标准制造。
-
The classification efficiency and resisting force expenses have been compaired with cyclone dust extractor by rltv empirical study.
与普通旋风除尘器进行了对比实验研究，比较了分级效率和阻力损失情况，结果表明在相同风量下，无筒体旋风除尘器的分级效率高于有筒体旋风除尘器；在相同风量下，无筒体旋风除尘器的阻力损失较有筒体旋风除尘器的阻力损失有所增加。
-
Based on finite element dynamic model of expansion casing with rubber sleeve, casing deformation and stress change inside casing, contact pressure at both sides of rubber sleeve and expansion parameter changes caused by friction factors during the expansion are analyzed.
根据带有橡胶筒的膨胀套管有限元力学模型，对套管膨胀过程中橡胶变形和套管内的应力变化、橡胶筒两侧的接触压力，以及摩擦因数引起的膨胀参数变化等做了分析研究；对橡胶筒的厚度、长度做了定量和定性分析，发现在橡胶与套管之间的接触摩擦因数作用下，橡胶过长将会在纵向产生&堆积&现象，在有限空间中，使其受较大的接触压力而失效。
-
Feed aprons and stock guide plates with different angles and spacing are being equipped inside the cylinder, the structure can ensure that the material being dried runes along the direction of screwing under the impact of gravitation and keeps for a sufficient maintaining times and dispersity in the cylinder to make the material has sufficient heat exchange with the heat airflow from air heating furnace inside of the cylinder.
三筒烘干机是引进欧洲先进技术，由三个不同直径的同心圆筒彼此相嵌组合而成的。筒内装有不同角度和间距的扬料板和导料板，这种结构能够保证被烘干物料在重力作用下沿着螺旋的运动方向运动，在筒内保持足够的停留时间和充分的分散度，使被烘干物料在筒内与来自热风炉内的热气流进行充分的热交换。
-
XD-2003 strap machine is changed from XD-2002 machine which has a cast aluminium on the bed,making the screw,screwtube and speed reducer keeping concentric.the V-model manger on the bed is lower than the flat on which the speed reducer is fixed,the components are finished machining by machine tool.guaranteeing perpendicularity, degree of balance.speed reducer,screw and screwtube is fixed on the base,and the screwtube is in the mini-manger,then ensuring axis keeping concentric with sheath,screwtube feed opening has a chromium hard-wearing sheath,which can improve the lifetime of the screw and screwtube to threefold or to fourfold.
XD-2003 型塑料打包带机组，是在XD-2002型机组的机座上安装了一个铸铁机座，使螺杆，螺筒和减速机保持同心，座上的V型槽比安装减速机的平面低，其部件都是经过机床精加工完成的，保证了垂直度和平衡度。减速机和螺杆、螺筒置于底座上，且螺筒卡在微型槽内。确保轴与套保持同心，螺筒下料口处设有高铬耐磨衬套，这样可使螺杆、螺筒的寿命提高3-4倍。
- 更多网络解释与下筒相关的网络解释 [注：此内容来源于网络，仅供参考]
-
ampoule：筒
下到井后,进入到一间垃圾房,在一张椅子上找到一个吹风筒(ampoule), 拿到它之后去到对面的一个房间,进去后发现有一些药品,意外的发现在这间房 里面还有一道门的,再走进去,门的旁边有一个电制,用刚才拿到的电风筒插进去.电风筒插入后发现剧情,
-
bailer：汲筒
本法是利用钻绳连接钻具,靠钻头的上下冲击作用钻凿地层,经一段时间之后,用汲砂绳(Sand lines)接汲筒(bailer)将岩层取出使井内清净后,又下钻头,如此反覆进行至钻达目标后,才套管及进行完井工作.
-
Recycle Bin：资源回收筒
请在"暂存档案"(Temporary Files)、"暂存网路档案"(Temporary Internet Files)、和"资源回收筒"(Recycle Bin)项目下打勾,然后点击"OK". 清除文件可能要几分钟的时间. "系统还原"(System Restore)功能可以让你把电脑还原到从前的某一个时间(还原点),
-
Run in the core barrel one more time：继续下岩芯筒(或: 取芯筒)
The core recoVery abundance is 98%. 岩芯收获率是98% | Run in the core barrel one more time. 继续下岩芯筒(或: 取芯筒) | Run in hole core barrel. 下取芯筒
-
downcast ventilator：吸气通风筒
downcast tube 下降管立管直浇口 | downcast ventilator 吸气通风筒 | downcast ventilator 下向通风筒
-
downcast ventilator：下向通风筒
downcast ventilator 吸气通风筒 | downcast ventilator 下向通风筒 | downcast 锅炉)降水管
-
hawse jackass：锚链孔下端塞
hawse hook 链孔肘板 | hawse jackass 锚链孔下端塞 | hawse jackass 锚链孔下端塞锚链筒下端塞
-
hawse jackass：锚链孔下端塞锚链筒下端塞
hawse jackass 锚链孔下端塞 | hawse jackass 锚链孔下端塞锚链筒下端塞 | hawse piece 锚链孔肋材
-
hawse bag：锚链孔塞锚链孔下端塞锚链筒下端塞锚链筒下端塞
hawse bag 锚链孔塞 | hawse bag 锚链孔塞锚链孔下端塞锚链筒下端塞锚链筒下端塞 | hawse bag 锚链筒下端塞
-
hawse bag：锚链筒下端塞
hawse bag 锚链孔塞锚链孔下端塞锚链筒下端塞锚链筒下端塞 | hawse bag 锚链筒下端塞 | hawse block 锚链孔防水塞