coating machine

coating machine的基本解释

-

涂布机, 涂覆机械, 涂漆机, 镀膜机

与coating machine相关的网络例句 [注：此内容来源于网络，仅供参考]

The main products include: 1, tensile strength, universal testing machine: microcomputer-controlled universal testing machine, economic-type universal testing machine, tensile testing machine micro-computer, electric / manual (Vertical / Horizontal / double pole / single pole) Rally Units, micro-computer plug test machine, spring tension and compression testing machine, etc.; Second, environmental testing machine series: constant temperature and humidity chamber, drying oven, large load-aging room, walk-in constant temperature and humidity test chamber , Thermal Shock Test Chamber, UV weathering tester, salt spray testing machine, aging chamber three, cartons, packaging, furniture testing machine series: microcomputer carton compression testing machine, the breakdown strength test machine, drop (single arm / arms) Test Units, Units microcomputer vibration test, vibration test Analog Motor Transport Units four, electrical equipment testing machine series: plug wire bending test machine, drum testing machine plugs, plug wire hoist swing test machine, plug-line static tensile testing machine, sudden pull test machine, power cord bending test machine, combustion testing machine, 90-degree peel strength testing machine, torsion testing machine wire, wire abrasion test machine, flexible wires and flexibility testing machine, wire print Kennedy fastness testing machine, measuring the rate of wire testing machine, fatigue test handset line stretching machine, plug test machine, torsion testing machine cold, temperature testing machine, wire thermostat ball pressure testing machine, hot wire tester, leakage from marks tester, wire short-circuit / open circuit / high pressure / low pressure / insulation / conduction / mispairing tester; Friday, computer, mobile phone tester series: Life expectancy axis testing machine, testing machine life clamshell mobile phone, key life testing machine, resistance friction test machine, fully automatic torque tester, mobile Units drop test, tape wear-resistant test machine, the mouse roller life test machine; six, rubber, plastic, tape testing machine series: wear test machine, folding / Wear-resistant test machine, winding machine, vertical / rebound test machine, the permanent distortion compression test machines, foam compression stress test machine, foam plastic repeated compression test machines, test material removed machine, plastic machine Determination of Melt Index , melting point tester, heat distortion temperature test trough, falling ball / drop down / DuPont impact test machine, to maintain constant temperature test tape machine, adhesive tape early bowls tester, hardness tester, peel strength testing machine; seven, footwear, leather , Testing Machine Series: friction test machine, add sulfur testing machine, conveyor-type Needle detector machine, friction dyeing fastness tester, testing machineDecoloration friction, standard light box, cold testing machine

主要产品包括：一、拉力强度、万能材料试验机：微机控制万能材料试验机、经济型万能材料试验机、微电脑拉力试验机、电动/手动（立式/卧式/双杆/单杆）拉力台、微电脑插拔力试验机、弹簧拉压试验机等；二、环境试验机系列：恒温恒湿试验箱、干燥箱、大型负载老化室、步入式恒温恒湿试验室、冷热冲击试验箱、UV耐候试验机、盐水喷雾试验机、老化试验箱三、纸箱、包装、家私试验机系列：微电脑纸箱抗压试验机、破裂强度试验机、跌落试验台、微电脑振动试验台、模拟汽车运输振动试验台四、电工器材试验机系列：插头引线弯折试验机、插头滚筒试验机、插头线吊重摆动试验机、插头线静态拉力试验机、突拉试验机、电源线折曲试验机、燃烧试验机、90度剥离强度试验机、电线扭转试验机、电线耐磨损试验机、可挠电线柔软度试验机、电线印刷体坚牢度试验机、线材测长率试验机、听筒线伸缩疲劳试验机、插拔力试验机、低温冷挠试验机、温升试验机、电线恒温球压试验机、灼热丝试验机、漏电起痕试验机、线材的短路/断路/高压/低压/绝缘/导通/误配测试仪；五、计算机、手机试验机系列：转轴寿命试验机、手机翻盖寿命试验机、按键寿命试验机、耐磨擦试验机、全自动扭力试验机、手机跌落试验台、纸带耐磨试验机、鼠标滚轴寿命试验机；六、橡胶、塑料、胶带试验机系列：磨耗试验机、耐折/耐磨试验机、曲折试验机、垂直/反跳弹性试验机、永久压缩歪度试验机、泡棉压缩应力试验机、发泡塑料反复压缩试验机、试料磨平机、塑料熔融指数测定机、融点测试机、热变形温度试验槽、落球/落垂/杜邦冲击试验机、恒温胶带保持力试验机、胶带初粘性滚球试验机、硬度计，剥离强度试验机；七、制鞋、皮革、试验机系列：磨擦试验机、加硫试验机、输送式检针机、磨擦染色坚牢度试验机、双锤磨擦脱色试验机、标准光源箱、耐寒试验机

Through designing of composition and structure of the bioactive graded coating,innerstress and its distribution in the coating were analyzed and calculated, the resultsshowed that when composition distribution coefficient n was 1.5, a reasonable stressdistribution could be got, that was at the beginning of deposition the suspension containingrichly BG granules was used so that a rich BG granules layer, a good transitional layerbetween BG layer at the bottom and the coating could be obtained at the titanium alloy side,the bottom of the coating; the stress value near the interface and surface and its character,pressure stress or tensile stress, were decided by the character of its composition itself.Changing composition distribution coefficient n could only change the variation tendency ofstress in the coating, but did not change the stress distribution rule in the coating. Thethinner the coating is, the sharper stress variation in the coating is, which does not mean thatthicker coating is better because the thicker the coating is, the little the permitteddeformation of coating is, so the coating thickness should be thinner, for example, about50μm for bending applications, but for applications only bearing pure shear stress, such asroot of tooth implant, the coating can be thicker little, for instance, about 80～100μm. The study on electrification characteristic and electrophoresis deposition of HAand BG granules in aqueous and non-aqueous solution system found that EPD almost didn'toccur in aqueous solution system. However, because HA granules take position charges inabsolute alcohol, a homogeneous EPD be carried out on the cathode titanium alloy slice, but taking negative charge in absolute alcohol the BG granules not be deposited on the cathode. A guided HA crystallizing, 100～300nm, on surface of the BG granules be realized by metathetical reaction, which cover BG granules with HA microcrystals and make the covered BG granules taking position charges in absolute alcohol, sequentially realize the EPCD of the BG and HA granules on the cathode, so it is feasible to make a titanium alloy/BG/HA bioactive graded coating by making use of EPCD technology. The corrosion experiment of rich boron bioglass coating and plasma spray coating showed that split phase, rich boron and rich silicon phase, occurred during its preparation. In basic medium the corrosion behavior of 〓 BG coating showed uniformity corrosion, the corrosion mostly occurred at rich boron phase area, therefore batch formula design of BGshould avoid the occurring of split phase. The corrosion appearance of plasma spray coatingappeared a non-uniform corrosion, mostly occurred at the edge of the laminated HA moltendrops, and emerged an accelerated corrosion tendency, which will easyly lead to corrosioncrackles extending to the interface and the happening of osmotic interfacial corrosion, thatmay be one of the major reasons leading to the coating cracking-off in the later period. Thetesting results of thermal expansion coefficient of 〓 and 〓BG showed the thermalexpansion coefficient of 〓 BG matched with that of titanium alloy better, and 〓 BG couldsinter with titanium alloy into densification enamel layer at low temperature (720℃).

将Ti6Al4V合金在1000℃下进行真空热处理会降低其力学性能，且合金内的V元素会向表面富集，因此，钛合金真空热处理和表面涂层的烧结温度不能过高，即应低于其相转变点；通过对生物活性梯度涂层的组成和结构的设计，分析和计算了梯度涂层内的应力大小和分布，结果表明：对于本研究，当成分分布系数n=1.5时，可以获得较合理的涂层力学性能，即在沉积开始时，采用富含BG颗粒的悬浮液，以便在钛合金侧获得同底层BG有良好过渡的富BG涂层；梯度涂层界面和表面的应力大小、性质由材料组成本身的性质决定，改变成分分布系数，只能改变涂层内应力变化的趋势；涂层的厚薄不影响涂层内的应力分布规律，但涂层越薄，涂层内的应力变化越快，但这并不意味着涂层越厚越好，因为涂层越厚，涂层允许的变形越小，对于应用于弯曲受力部位的涂层而言，涂层应薄一点为好(50μm)；而对于仅纯受剪切应力的部位，如牙根种植体，涂层可适当加厚(80～100μm)；通过对HA和BG颗粒在水溶液体系和非水溶液体系中的带电特性和电泳沉积的研究发现，它们在水溶液体系中很难发生电沉积；在无水乙醇溶液中，HA颗粒带正电，可在阴极钛合金片上发生均匀的电泳沉积，而BG颗粒则带负电荷；利用复分解反应法，可以制得100～300nm的HA，通过诱导HA在BG颗粒表面结晶，可对BG颗粒进行表面包覆，获得了被HA包覆的BG颗粒，改变了BG颗粒表面的带电特性，使BG和HA颗粒在无水乙醇中均带上正电荷，从而实现了HA和BG颗粒在阴极上的共沉积。

The basic concepts of coatings function, composition, classification. Various coatings: drying oil, rosin and lacquer, alkyd resin and polyester coating, amino resin coating, acrylic acid resin coating, epoxy resin coating, polyurethane coating, elementary organic resin coating. Several new coatings: high solid-constituent coating, water soluble coating, powder coating, light-sensitive coating, anti-corrosion coating, flame-retarded coating, anti-contamination coating, color changing coating, conductive coating and magnetic coating, aeroplane and aerospace dope.

涂料的基本概念：涂料的功能、基本组成、分类；各种涂料的制造及应用：干性油、松香与大漆，醇酸树脂与聚酯涂料，氨基树脂涂料，丙烯酸树脂涂料，环氧树脂涂料，聚氨酯涂料，元素有机树脂涂料；几种新型涂料简介：高固体分涂料，水性涂料，粉末涂料，光敏涂料，防腐蚀涂料，防火涂料，防污涂料，变色涂料，导电涂料和磁性涂料，航空航天特种涂料。

与coating machine相关的网络解释 [注：此内容来源于网络，仅供参考]

dip coating：浸涂法

而在软性电子之溶液制程中,最关键的技术即是软性电子材料的涂布技术,相关技术可细分如下:旋转涂布(spin coating)、浸涂法(dip coating)、铸涂法(cast coating)、滴涂法(drop coating)、网印(screen printing),

self-color anodic oxide coating, integral color anodic oxide coating：原色皮膜

硬质皮膜 hard anodic oxide coating | 原色皮膜 self-color anodic oxide coating, integral color anodic oxide coating | 电解染色皮膜electrolytic colored anodic oxide coating

coating machine：包衣机

粉末压片机 powder pressing machine | 包衣机 coating machine | 荸荠式包衣机 water chestnut type sugar coating machine